OpenDJ Administration GuideVersion 4.0.0-SNAPSHOT

Hands-on guide to configuring and using OpenDJ features. The OpenDJ project offers open source LDAP directory services in Java.

Preface

This guide shows you how to configure, maintain, and troubleshoot OpenDJ directory services. OpenDJ directory services allow applications to access directory data:

• Over Lightweight Directory Access Protocol (LDAP)

• Using Directory Services Markup Language (DSML)

• Over Hypertext Transfer Protocol (HTTP) by using HTTP methods in the Representational State Transfer (REST) style

In reading and following the instructions in this guide, you will learn how to:

• Use OpenDJ administration tools

• Manage OpenDJ server processes

• Import, export, backup, and restore directory data

• Configure OpenDJ server connection handlers for all supported protocols

• Configure administrative privileges and fine-grained access control

• Index directory data, manage schemas for directory data, and enforce uniqueness of directory data attribute values

• Configure data replication between OpenDJ directory servers

• Implement password policies, pass-through authentication to another directory, password synchronization with Samba, account lockout, and account status notification

• Set resource limits to prevent unfair use of directory server resources

• Monitor directory servers through logs and alerts and over JMX

• Tune directory servers for best performance

• Secure directory server deployments

• Change directory server key pairs and public key certificates

• Move a directory server to a different system

• Troubleshoot directory server issues

1. Using This Guide

This guide is intended for system administrators who build, deploy, and maintain OpenDJ directory services for their organizations.

This guide starts with an introduction to directory services. The rest of this guide is written with the assumption that you have basic familiarity with the following topics:

• The client-server model of distributed computing

• Lightweight Directory Access Protocol (LDAP), including how clients and servers exchange messages

• Managing Java-based services on operating systems and application servers

• Using command-line tools and reading command-line examples written for UNIX/Linux systems

• Configuring network connections on operating systems

• Managing Public Key Infrastructure (PKI) used to establish secure connections

Depending on the features you use, you should also have basic familiarity with the following topics:

• Directory Services Markup Language (DSML), including how clients and servers exchange messages

• Hypertext Transfer Protocol (HTTP), including how clients and servers exchange messages

• Java Management Extensions (JMX) for monitoring services

• Simple Network Management Protocol (SNMP) for monitoring services

2. Formatting Conventions

Most examples in the documentation are created in GNU/Linux or Mac OS X operating environments. If distinctions are necessary between operating environments, examples are labeled with the operating environment name in parentheses. To avoid repetition file system directory names are often given only in UNIX format as in /path/to/server, even if the text applies to C:\path\to\server as well.

Absolute path names usually begin with the placeholder /path/to/. This path might translate to /opt/, C:\Program Files\, or somewhere else on your system.

Command-line, terminal sessions are formatted as follows:

$echo$JAVA_HOME
/path/to/jdk

Command output is sometimes formatted for narrower, more readable output even though formatting parameters are not shown in the command. In the following example, the query string parameter _prettyPrint=true is omitted and some of the output is replaced with an ellipsis (...):

$curl https://bjensen:hifalutin@opendj.example.com:8443/users/newuser { "_rev" : "000000005b337348", "_id" : "newuser", ... }  Program listings are formatted as follows: class Test { public static void main(String [] args) { System.out.println("This is a program listing."); } }  3. Accessing Documentation Online ForgeRock publishes comprehensive documentation online: • The ForgeRock Knowledge Base offers a large and increasing number of up-to-date, practical articles that help you deploy and manage ForgeRock software. While many articles are visible to community members, ForgeRock customers have access to much more, including advanced information for customers using ForgeRock software in a mission-critical capacity. • ForgeRock core documentation, such as this document, aims to be technically accurate and complete with respect to the software documented. It is visible to everyone and covers all product features and examples of how to use them. Core documentation therefore follows a three-phase review process designed to eliminate errors: • Product managers and software architects review project documentation design with respect to the readers' software lifecycle needs. • Subject matter experts review proposed documentation changes for technical accuracy and completeness with respect to the corresponding software. • Quality experts validate implemented documentation changes for technical accuracy, completeness in scope, and usability for the readership. The review process helps to ensure that documentation published for a ForgeRock release is technically accurate and complete. Fully reviewed, published core documentation is available at http://backstage.forgerock.com/. Use this documentation when working with a ForgeRock Enterprise release. You can find pre-release draft documentation at the online community resource center. Use this documentation when trying a nightly build. 4. Joining the ForgeRock Community Visit the Community resource center where you can find information about each project, download nightly builds, browse the resource catalog, ask and answer questions on the forums, find community events near you, and of course get the source code as well. Chapter 1. Understanding Directory Services This chapter introduces directory concepts and directory server features. In this chapter you will learn: • Why directory services exist and what they do well • How data is arranged in directories that support Lightweight Directory Access Protocol (LDAP) • How clients and servers communicate in LDAP • What operations are standard according to LDAP and how standard extensions to the protocol work • Why directory servers index directory data • What LDAP schemas are for • What LDAP directories provide to control access to directory data • Why LDAP directory data is replicated and what replication does • What Directory Services Markup Language (DSML) is for • How HTTP applications can access directory data in the Representation State Transfer (REST) style A directory resembles a dictionary or a phone book. If you know a word, you can look it up its entry in the dictionary to learn its definition or its pronunciation. If you know a name, you can look it up its entry in the phone book to find the telephone number and street address associated with the name. If you are bored, curious, or have lots of time, you can also read through the dictionary, phone book, or directory, entry after entry. Where a directory differs from a paper dictionary or phone book is in how entries are indexed. Dictionaries typically have one index—words in alphabetical order. Phone books, too—names in alphabetical order. Directories' entries on the other hand are often indexed for multiple attributes, names, user identifiers, email addresses, and telephone numbers. This means you can look up a directory entry by the name of the user the entry belongs to, but also by their user identifier, their email address, or their telephone number, for example. OpenDJ directory services are based on the Lightweight Directory Access Protocol (LDAP). Much of this chapter serves therefore as an introduction to LDAP. OpenDJ directory services also provide RESTful access to directory data, yet, as directory administrator, you will find it useful to understand the underlying model even if most users are accessing the directory over HTTP rather than LDAP. 1.1. How Directories and LDAP Evolved Phone companies have been managing directories for many decades. The Internet itself has relied on distributed directory services like DNS since the mid 1980s. It was not until the late 1980s, however, that experts from what is now the International Telecommunications Union published the X.500 set of international standards, including Directory Access Protocol. The X.500 standards specify Open Systems Interconnect (OSI) protocols and data definitions for general purpose directory services. The X.500 standards were designed to meet the needs of systems built according to the X.400 standards, covering electronic mail services. Lightweight Directory Access Protocol has been around since the early 1990s. LDAP was originally developed as an alternative protocol that would allow directory access over Internet protocols rather than OSI protocols, and be lightweight enough for desktop implementations. By the mid-1990s, LDAP directory servers became generally available and widely used. Until the late 1990s, LDAP directory servers were designed primarily with quick lookups and high availability for lookups in mind. LDAP directory servers replicate data, so when an update is made, that update is applied to other peer directory servers. Thus, if one directory server goes down, lookups can continue on other servers. Furthermore, if a directory service needs to support more lookups, the administrator can simply add another directory server to replicate with its peers. As organizations rolled out larger and larger directories serving more and more applications, they discovered that they needed high availability not only for lookups, but also for updates. Around the year 2000, directories began to support multi-master replication; that is, replication with multiple read-write servers. Soon thereafter, the organizations with the very largest directories started to need higher update performance as well as availability. The OpenDJ code base began in the mid-2000s, when engineers solving the update performance issue decided the cost of adapting the existing C-based directory technology for high-performance updates would be higher than the cost of building a next generation, high performance directory using Java technology. 1.2. About Data In LDAP Directories LDAP directory data is organized into entries, similar to the entries for words in the dictionary, or for subscriber names in the phone book. A sample entry follows: dn: uid=bjensen,ou=People,dc=example,dc=com uid: bjensen cn: Babs Jensen cn: Barbara Jensen facsimileTelephoneNumber: +1 408 555 1992 gidNumber: 1000 givenName: Barbara homeDirectory: /home/bjensen l: San Francisco mail: bjensen@example.com objectClass: inetOrgPerson objectClass: organizationalPerson objectClass: person objectClass: posixAccount objectClass: top ou: People ou: Product Development roomNumber: 0209 sn: Jensen telephoneNumber: +1 408 555 1862 uidNumber: 1076  Barbara Jensen's entry has a number of attributes, such as uid: bjensen, telephoneNumber: +1 408 555 1862, and objectClass: posixAccount[1]. When you look up her entry in the directory, you specify one or more attributes and values to match. The directory server then returns entries with attribute values that match what you specified. The attributes you search for are indexed in the directory, so the directory server can retrieve them more quickly.[2] The entry also has a unique identifier, shown at the top of the entry, dn: uid=bjensen,ou=People,dc=example,dc=com. DN is an acronym for distinguished name. No two entries in the directory have the same distinguished name. Yet, DNs are typically composed of case-insensitive attributes. Sometimes distinguished names include characters that you must escape. The following example shows an entry that includes escaped characters in the DN: $ ldapsearch --port 1389 --baseDN dc=example,dc=com "(uid=escape)"
dn: cn=\" # \+ \, \; \< = \> \\ DN Escape Characters,dc=example,dc=com
objectClass: person
objectClass: inetOrgPerson
objectClass: organizationalPerson
objectClass: top
givenName: " # + , ; < = > \
uid: escape
cn: " # + , ; < = > \ DN Escape Characters
sn: DN Escape Characters
mail: escape@example.com


LDAP entries are arranged hierarchically in the directory. The hierarchical organization resembles a file system on a PC or a web server, often imagined as an upside-down tree structure, looking similar to a pyramid. [3] The distinguished name consists of components separated by commas, uid=bjensen,ou=People,dc=example,dc=com. The names are little-endian. The components reflect the hierarchy of directory entries.

Barbara Jensen's entry is located under an entry with DN ou=People,dc=example,dc=com, an organization unit and parent entry for the people at Example.com. The ou=People entry is located under the entry with DN dc=example,dc=com, the base entry for Example.com. DC is an acronym for domain component. The directory has other base entries, such as cn=config, under which the configuration is accessible through LDAP. A directory can serve multiple organizations, too. You might find dc=example,dc=com, dc=mycompany,dc=com, and o=myOrganization in the same LDAP directory. Therefore, when you look up entries, you specify the base DN to look under in the same way you need to know whether to look in the New York, Paris, or Tokyo phone book to find a telephone number.[4]

A directory server stores two kinds of attributes in a directory entry: user attributes and operational attributes. User attributes hold the information for users of the directory. All of the attributes shown in the entry at the outset of this section are user attributes. Operational attributes hold information used by the directory itself. Examples of operational attributes include entryUUID, modifyTimestamp, and subschemaSubentry. When an LDAP search operation finds an entry in the directory, the directory server returns all the visible user attributes unless the search request restricts the list of attributes by specifying those attributes explicitly. The directory server does not, however, return any operational attributes unless the search request specifically asks for them. Generally speaking, applications should change only user attributes, and leave updates of operational attributes to the server, relying on public directory server interfaces to change server behavior. An exception is access control instruction (aci) attributes, which are operational attributes used to control access to directory data.

1.3. About LDAP Client and Server Communication

In some client server communication, like web browsing, a connection is set up and then torn down for each client request to the server. LDAP has a different model. In LDAP the client application connects to the server and authenticates, then requests any number of operations, perhaps processing results in between requests, and finally disconnects when done.

The standard operations are as follows:

• Bind (authenticate). The first operation in an LDAP session usually involves the client binding to the LDAP server, with the server authenticating the client.[5] Authentication identifies the client's identity in LDAP terms, the identity which is later used by the server to authorize (or not) access to directory data that the client wants to lookup or change.

• Search (lookup). After binding, the client can request that the server return entries based on an LDAP filter, which is an expression that the server uses to find entries that match the request, and a base DN under which to search. For example, to look up all entries for people with the email address bjensen@example.com in data for Example.com, you would specify a base DN such as ou=People,dc=example,dc=com and the filter (mail=bjensen@example.com).

• Compare. After binding, the client can request that the server compare an attribute value the client specifies with the value stored on an entry in the directory.

• Modify. After binding, the client can request that the server change one or more attribute values on an entry. Often administrators do not allow clients to change directory data, so allow appropriate access for client application if they have the right to update data.

• Add. After binding, the client can request to add one or more new LDAP entries to the server.

• Delete. After binding, the client can request that the server delete one or more entries. To delete an entry with other entries underneath, first delete the children, then the parent.

• Modify DN. After binding, the client can request that the server change the distinguished name of the entry. In other words, this renames the entry or moves it to another location. For example, if Barbara changes her unique identifier from bjensen to something else, her DN would have to change. For another example, if you decide to consolidate ou=Customers and ou=Employees under ou=People instead, all the entries underneath must change distinguished names. [6]

• Unbind. When done making requests, the client can request an unbind operation to end the LDAP session.

• Abandon. When a request seems to be taking too long to complete, or when a search request returns many more matches than desired, the client can send an abandon request to the server to drop the operation in progress.

For practical examples showing how to perform the key operations using the command-line tools delivered with OpenDJ directory server, read Chapter 2, "Performing LDAP Operations" in the OpenDJ Directory Server Developer's Guide.

1.4. About LDAP Controls and Extensions

LDAP has standardized two mechanisms for extending the operations directory servers can perform beyond the basic operations listed above. One mechanism involves using LDAP controls. The other mechanism involves using LDAP extended operations.

LDAP controls are information added to an LDAP message to further specify how an LDAP operation should be processed. For example, the Server-Side Sort request control modifies a search to request that the directory server return entries to the client in sorted order. The Subtree Delete request control modifies a delete to request that the server also remove child entries of the entry targeted for deletion.

One special search operation that OpenDJ supports is Persistent Search. The client application sets up a Persistent Search to continue receiving new results whenever changes are made to data that is in the scope of the search, thus using the search as a form of change notification. Persistent Searches are intended to remain connected permanently, though they can be idle for long periods of time.

The directory server can also send response controls in some cases to indicate that the response contains special information. Examples include responses for entry change notification, password policy, and paged results.

For the list of supported LDAP controls, see Appendix F, "LDAP Controls" in the OpenDJ Reference.

LDAP extended operations are additional LDAP operations not included in the original standard list. For example, the Cancel Extended Operation works like an abandon operation, but finishes with a response from the server after the cancel is complete. The StartTLS Extended Operation allows a client to connect to a server on an unsecure port, but then starts Transport Layer Security negotiations to protect communications.

For the list of supported LDAP extended operations, see Appendix G, "LDAP Extended Operations" in the OpenDJ Reference.

As mentioned early in this chapter, directories have indexes for multiple attributes. In fact, by default OpenDJ does not let normal users perform searches that are not indexed, because such searches mean OpenDJ has to scan the entire directory looking for matches.

As directory administrator, part of your responsibility is making sure directory data is properly indexed. OpenDJ provides tools for building and rebuilding indexes, for verifying indexes, and also for evaluating how well they are working.

For help better understanding and managing indexes, read Chapter 7, "Indexing Attribute Values".

1.6. About LDAP Schema

Some databases are designed to hold huge amounts of data for a particular application. Although such databases might support multiple applications, how their data is organized depends a lot on the particular applications served.

In contrast, directories are designed for shared, centralized services. Although the first guides to deploying directory services suggested taking inventory of all the applications that would access the directory, many current directory administrators do not even know how many applications use their services. The shared, centralized nature of directory services fosters interoperability in practice, and has helped directory services be successful in the long term.

Part of what makes this possible is the shared model of directory user information, and in particular the LDAP schema. LDAP schema defines what the directory can contain. This means that directory entries are not arbitrary data, but instead tightly codified objects whose attributes are completely predictable from publicly readable definitions. Many schema definitions are in fact standard. They are the same not just across a directory service but across different directory services.

At the same time, unlike some databases, LDAP schema and the data it defines can be extended on the fly while the service is running. LDAP schema is also accessible over LDAP. One attribute of every entry is its set of objectClass values. This gives you as administrator great flexibility in adapting your directory service to store new data without losing or changing the structure of existing data, and also without ever stopping your directory service.

For a closer look, see Chapter 14, "Managing Schema".

1.7. About Access Control

In addition to directory schema, another feature of directory services that enables sharing is fine-grained access control.

As directory administrator, you can control who has access to what data when, how, where and under what conditions by using access control instructions (ACI). You can allow some directory operations and not others. You can scope access control from the whole directory service down to individual attributes on directory entries. You can specify when, from what host or IP address, and what strength of encryption is needed in order to perform a particular operation.

As ACIs are stored on entries in the directory, you can furthermore update access controls while the service is running, and even delegate that control to client applications. OpenDJ combines the strengths of ACIs with separate administrative privileges to help you secure access to directory data.

For more information, read Chapter 6, "Configuring Privileges and Access Control".

Replication in OpenDJ consists of copying each update to the directory service to multiple directory servers. This brings both redundancy, in the case of network partitions or of crashes, and also scalability for read operations. Most directory deployments involve multiple servers replicating together.

When you have replicated servers, all of which are writable, you can have replication conflicts. What if, for example, there is a network outage between two replicas, and meanwhile two different values are written to the same attribute on the same entry on the two replicas? In nearly all cases, OpenDJ replication can resolve these situations automatically without involving you, the directory administrator. This makes your directory service resilient and safe even in the unpredictable real world.

One perhaps counterintuitive aspect of replication is that although you do add directory read capacity by adding replicas to your deployment, you do not add directory write capacity by adding replicas. As each write operation must be replayed everywhere, the result is that if you have N servers, you have N write operations to replay.

Another aspect of replication to keep in mind is that it is "loosely consistent." Loosely consistent means that directory data will eventually converge to be the same everywhere, but it will not necessarily be the same everywhere right away. Client applications sometimes get this wrong when they write to a pool of load-balanced directory servers, immediately read back what they wrote, and are surprised that it is not the same. If your users are complaining about this, either make sure their application always gets sent to the same server, or else ask that they adapt their application to work in a more realistic manner.

To get started with replication, see Chapter 8, "Managing Data Replication".

Directory Services Markup Language (DSMLv2) v2.0 became a standard in 2001. DSMLv2 describes directory data and basic directory operations in XML format, so they can be carried in Simple Object Access Protocol (SOAP) messages. DSMLv2 further allows clients to batch multiple operations together in a single request, to be processed either in sequential order or in parallel.

OpenDJ provides support for DSMLv2 as a DSML gateway, which is a Servlet that connects to any standard LDAPv3 directory. DSMLv2 opens basic directory services to SOAP-based web services and service oriented architectures.

To set up DSMLv2 access, see Section 5.9, "DSML Client Access".

OpenDJ can expose directory data as JSON resources over HTTP to REST clients, providing easy access to directory data for developers who are not familiar with LDAP. RESTful access depends on a configuration that describes how the JSON representation maps to LDAP entries.

Although client applications have no need to understand LDAP, OpenDJ's underlying implementation still uses the LDAP model for its operations. The mapping adds some overhead. Furthermore, depending on the configuration, individual JSON resources can require multiple LDAP operations. For example, an LDAP user entry represents manager as a DN (of the manager's entry). The same manager might be represented in JSON as an object holding the manager's user ID and full name, in which case OpenDJ must look up the manager's entry to resolve the mapping for the manager portion of the JSON resource, in addition to looking up the user's entry. As another example, suppose a large group is represented in LDAP as a set of 100,000 DNs. If the JSON resource is configured so that a member is represented by its name, then listing that resource would involve 100,000 LDAP searches to translate DNs to names.

A primary distinction between LDAP entries and JSON resources is that LDAP entries hold sets of attributes and their values, whereas JSON resources are documents containing arbitrarily nested objects. As LDAP data is governed by schema, almost no LDAP objects are arbitrary collections of data. [7] Furthermore, JSON resources can hold arrays, ordered collections that can contain duplicates, whereas LDAP attributes are sets, unordered collections without duplicates. For most directory and identity data, these distinctions do not matter. You are likely to run into them, however, if you try to turn your directory into a document store for arbitrary JSON resources.

Despite some extra cost in terms of system resources, exposing directory data over HTTP can unlock your directory services for a new generation of applications. The configuration provides flexible mapping, so that you can configure views that correspond to how client applications need to see directory data. OpenDJ also gives you a deployment choice for HTTP access. You can deploy the REST to LDAP gateway, which is a Servlet that connects to any standard LDAPv3 directory, or you can activate the HTTP connection handler on OpenDJ itself to allow direct and more efficient HTTP and HTTPS access.

For examples showing how to use RESTful access, see Chapter 1, "Performing RESTful Operations" in the OpenDJ Directory Server Developer's Guide.

1.11. About Building Directory Services

This chapter is meant to serve as an introduction, and so does not even cover everything in this guide, let alone everything you might want to know about directory services.

When you have understood enough of the concepts to build the directory services that you want to deploy, you must still build a prototype and test it before you roll out shared, centralized services for your organization. Read Chapter 18, "Tuning Servers For Performance" for a look at how to meet the service levels that directory clients expect.

[1] The objectClass attribute type indicates which types of attributes are allowed and optional for the entry. As the entries object classes can be updated online, and even the definitions of object classes and attributes are expressed as entries that can be updated online, directory data is extensible on the fly.

[2] Attribute values do not have to be strings. Some attribute values are pure binary like certificates and photos.

[3] Hence pyramid icons are associated with directory servers.

[4] The root entry for the directory, technically the entry with DN "" (the empty string), is called the root DSE, and contains information about what the server supports, including the other base DNs it serves.

[5] If the client does not bind explicitly, the server treats the client as an anonymous client. An anonymous client is allowed to do anything that can be done anonymously. What can be done anonymously depends on access control and configuration settings. The client can also bind again on the same connection.

[6] Renaming entire branches of entries can be a major operation for the directory, so avoid moving entire branches if you can.

[7] LDAP has the object class extensibleObject, but its use should be the exception rather than the rule.

Chapter 2. Administration Interfaces and Tools

This chapter covers OpenDJ administration tools. In this chapter you will learn to:

• Find and run OpenDJ control panel

• Find and run OpenDJ command-line tools

OpenDJ server software installs with a cross-platform, Java Swing-based control panel for many day-to-day tasks. OpenDJ server software also installs command-line tools for configuration and management tasks.

This chapter is one of the few to include screen shots of the control panel. Most examples make use of the command-line tools. Once you understand the concepts and how to use the command-line tools, you only need to know where to start in the control panel to accomplish what you set out to do.

At a protocol level, administration tools and interfaces connect to servers through a different network port than that used to listen for traffic from other client applications.

This chapter takes a quick look at the tools for managing directory services.

2.1. Control Panel

OpenDJ control panel offers a GUI for managing both local and remote servers. You choose the server to manage when you start the control panel. The control panel connects to the administration server port, making a secure LDAPS connection.

The version of OpenDJ control panel must be the same as the target version of OpenDJ directory server.

Start OpenDJ control panel by running the control-panel command, described in control-panel(1) in the OpenDJ Reference:

• (Linux, Solaris) Run /path/to/opendj/bin/control-panel.

• (Windows) Double-click C:\path\to\opendj\bat\control-panel.bat.

• (Mac OS X) Double-click /path/to/opendj/bin/ControlPanel.app.

When you log in to OpenDJ control panel, you authenticate over LDAP. This means that if users can run the control panel, they can use it to manage a running server. Yet, to start and stop the server process through OpenDJ control panel, you must start the control panel on the system where OpenDJ runs, as the user who owns the OpenDJ server files (such as the user who installed OpenDJ). In other words, the OpenDJ control panel does not do remote process management.

OpenDJ control panel displays key information about the server.

Down the left side of OpenDJ control panel, notice what you can configure:

Directory Data

Directory data provisioning is typically not something you do by hand in most deployments. Usually entries are created, modified, and deleted through specific directory client applications. The Manage Entries window can be useful in the lab as you design and test directory data and if you modify individual ACIs or debug issues with particular entries.

The Manage Entries window can check that your changes are valid before sending the request to the directory.

Additionally, the Directory Data list makes it easy to create a new base DN, and then import user data for the new base DN from LDAP Data Interchange Format (LDIF) files. You can also use the tools in the list to export user data to LDIF, and to backup and restore user data.

Schema

The Manage Schema window lets you browse and modify the rules that define how data is stored in the directory. You can add new schema definitions such as new attribute types and new object classes while the server is running, and the changes you make take effect immediately.

Indexes

The Manage Indexes window gives you a quick overview of all the indexes currently maintained for directory attributes. To protect your directory resources from being absorbed by costly searches on unindexed attributes, you may choose to keep the default behavior, preventing unindexed searches, instead adding indexes required by specific applications. (Notice that if the number of user data entries is smaller than the default resource limits, you can still perform what appear to be unindexed searches. That is because the dn2id index returns all user data entries without hitting a resource limit that would make the search unindexed.)

OpenDJ control panel also allows you to verify and rebuild existing indexes, which you may have to do after an upgrade operation, or if you have reason to suspect index corruption.

Monitoring

The Monitoring list gives you windows to observe information about the system, the Java Virtual Machine (JVM) used, and indications about how the cache is used, whether the work queue has been filling up, as well as details about the database. You can also view the numbers and types of requests arriving over the connection handlers, and the current tasks in progress as well.

Runtime Options

If you did not set appropriate JVM runtime options during the installation process, this is the list that allows you to do so through the control panel.

2.2. Command-Line Tools

Before you try the examples in this guide, set your PATH to include the OpenDJ directory server tools. The location of the tools depends on the operating environment and on the packages used to install OpenDJ. Table 2.1, "Paths To Administration Tools" indicates where to find the tools.

Table 2.1. Paths To Administration Tools
OpenDJ running on...OpenDJ installed from...Default path to tools...
Apple Mac OS X, Linux distributions, Oracle Solaris.zip/path/to/opendj/bin
Linux distributions.deb, .rpm/opt/opendj/bin
Microsoft Windows.zipC:\path\to\opendj\bat
Oracle SolarisSVR4/usr/opendj/bin

You find the installation and upgrade tools, setup, upgrade, and uninstall, in the parent directory of the other tools, as these tools are not used for everyday administration. For example, if the path to most tools is /path/to/opendj/bin you can find these tools in /path/to/opendj. For instructions on how to use the installation and upgrade tools, see the OpenDJ Installation Guide.

All OpenDJ command-line tools take the --help option.

All commands call Java programs and therefore involve starting a JVM.

Table 2.2, "Tools and Server Constraints" indicates the constraints, if any, that apply when using a command-line tool with a directory server.

Table 2.2. Tools and Server Constraints
CommandsConstraints
 backendstat create-rc-script dsjavaproperties encode-password list-backends setup start-ds upgrade windows-service

These commands must be used with the local OpenDJ directory server in the same installation as the tools.

These commands are not useful with non-OpenDJ directory servers.

 control-panel dsconfig export-ldif import-ldif manage-account manage-tasks rebuild-index restore status stop-ds uninstall verify-index

These commands must be used with OpenDJ directory server having the same version as the command.

These commands are not useful with non-OpenDJ directory servers.

 dsreplication

With one exception, this command can be used with current and previous OpenDJ directory server versions. The one exception is the dsreplication reset-change-number subcommand, which requires OpenDJ directory server version 3.0.0 or later.

This commands is not useful with other types of directory servers.

 make-ldif

This command depends on template files. The template files can make use of configuration files installed with OpenDJ directory server under config/MakeLDIF/.

The LDIF output can be used with OpenDJ and other directory servers.

 base64 ldapcompare ldapdelete ldapmodify ldappasswordmodify ldapsearch ldif-diff ldifmodify ldifsearch

These commands can be used independently of OpenDJ directory server, and so are not tied to a specific version.

The following list uses the UNIX names for the commands. On Windows all command-line tools have the extension .bat:

backendstat

Debug databases for pluggable backends.

For details see backendstat(1) in the OpenDJ Reference.

backup

Back up or schedule backup of directory data.

For details see backup(1) in the OpenDJ Reference.

base64

Encode and decode data in base64 format.

Base64-encoding represents binary data in ASCII, and can be used to encode character strings in LDIF, for example.

For details see base64(1) in the OpenDJ Reference.

create-rc-script (UNIX)

Generate a script you can use to start, stop, and restart the server either directly or at system boot and shutdown. Use create-rc-script -f script-file.

This allows you to register and manage OpenDJ directory server as a service on UNIX and Linux systems.

For details see create-rc-script(1) in the OpenDJ Reference.

dsconfig

The dsconfig command is the primary command-line tool for viewing and editing an OpenDJ configuration. When started without arguments, dsconfig prompts you for administration connection information. Once connected it presents you with a menu-driven interface to the server configuration.

Some advanced properties are not visible by default when you run the dsconfig command interactively. Use the --advanced option to access advanced properties.

When you pass connection information, subcommands, and additional options to dsconfig, the command runs in script mode and so is not interactive.

You can prepare dsconfig batch scripts by running the command with the --commandFilePath option in interactive mode, then reading from the batch file with the --batchFilePath option in script mode. Batch files can be useful when you have many dsconfig commands to run and want to avoid starting the JVM for each command.

Alternatively, you can read commands from standard input by using the --batch option.

For details see dsconfig(1) in the OpenDJ Reference.

dsjavaproperties

Apply changes you make to opendj/config/java.properties, which sets Java runtime options.

For details see dsjavaproperties(1) in the OpenDJ Reference.

dsreplication

Configure data replication between directory servers to keep their contents in sync.

For details see dsreplication(1) in the OpenDJ Reference.

Encode a cleartext password according to one of the available storage schemes.

For details see encode-password(1) in the OpenDJ Reference.

export-ldif

Export directory data to LDIF, the standard, portable, text-based representation of directory content.

For details see export-ldif(1) in the OpenDJ Reference.

import-ldif

Load LDIF content into the directory, overwriting existing data. It cannot be used to append data to the backend database.

For details see import-ldif(1) in the OpenDJ Reference.

ldapcompare

Compare the attribute values you specify with those stored on entries in the directory.

For details see ldapcompare(1) in the OpenDJ Reference.

ldapdelete

Delete one entry or an entire branch of subordinate entries in the directory.

For details see ldapdelete(1) in the OpenDJ Reference.

ldapmodify

Modify the specified attribute values for the specified entries.

Use the ldapmodify command with the -a option to add new entries.

For details see ldapmodify(1) in the OpenDJ Reference.

For details see ldappasswordmodify(1) in the OpenDJ Reference.

ldapsearch

Search a branch of directory data for entries that match the LDAP filter you specify.

For details see ldapsearch(1) in the OpenDJ Reference.

ldif-diff

Display differences between two LDIF files, with the resulting output having LDIF format.

For details see ldif-diff(1) in the OpenDJ Reference.

ldifmodify

Similar to the ldapmodify command, modify specified attribute values for specified entries in an LDIF file.

For details see ldifmodify(1) in the OpenDJ Reference.

ldifsearch

Similar to the ldapsearch command, search a branch of data in LDIF for entries matching the LDAP filter you specify.

For details see ldifsearch(1) in the OpenDJ Reference.

list-backends

List backends and base DNs served by OpenDJ directory server.

For details see list-backends(1) in the OpenDJ Reference.

make-ldif

Generate directory data in LDIF based on templates that define how the data should appear.

The make-ldif command is designed to help generate test data that mimics data expected in production, but without compromising real, potentially private information.

For details see make-ldif(1) in the OpenDJ Reference.

manage-account

Lock and unlock user accounts, and view and manipulate password policy state information.

For details see manage-account(1) in the OpenDJ Reference.

View information about tasks scheduled to run in the server, and cancel specified tasks.

For details see manage-tasks(1) in the OpenDJ Reference.

rebuild-index

Rebuild an index stored in an indexed backend.

For details see rebuild-index(1) in the OpenDJ Reference.

restore

Restore data from backup.

For details see restore(1) in the OpenDJ Reference.

start-ds

Start OpenDJ directory server.

For details see start-ds(1) in the OpenDJ Reference.

status

Display information about the server.

For details see status(1) in the OpenDJ Reference.

stop-ds

Stop OpenDJ directory server.

For details see stop-ds(1) in the OpenDJ Reference.

verify-index

Verify that an index stored in an indexed backend is not corrupt.

For details see verify-index(1) in the OpenDJ Reference.

windows-service (Windows)

Register and manage OpenDJ directory server as a Windows Service.

For details see windows-service(1) in the OpenDJ Reference.

Chapter 3. Managing Server Processes

This chapter covers starting and stopping OpenDJ directory server. In this chapter you will learn to:

• Start, restart, and stop OpenDJ directory server using OpenDJ command-line tools, OpenDJ control panel, or system service integration on Linux and Windows systems

• Understand how to recognize that OpenDJ directory server is recovering from a crash or abrupt shutdown

• Configure whether OpenDJ directory server loads data into cache at server startup before accepting client connections

3.1. Starting a Server

Use one of the following techniques:

• Use the start-ds command, described in start-ds(1) in the OpenDJ Reference:

$start-ds  Alternatively, you can specify the --no-detach option to start the server in the foreground. • (Linux) If OpenDJ directory server was installed from a .deb or .rpm package, then service management scripts were created at setup time. Use the service opendj start command: centos# service opendj start Starting opendj (via systemctl): [ OK ]  ubuntu$ sudo service opendj start
$Starting opendj: > SUCCESS.  • (UNIX) Create an RC script by using the create-rc-script command, described in create-rc-script(1) in the OpenDJ Reference, and then use the script to start the server. Unless you run OpenDJ on Linux as root, use the --userName userName option to specify the user who installed OpenDJ: $ sudo create-rc-script \
--outputFile /etc/init.d/opendj \

$sudo /etc/init.d/opendj start  For example, if you run OpenDJ on Linux as root, you can use the RC script to start the server at system boot, and stop the server at system shutdown: $ sudo update-rc.d opendj defaults
update-rc.d: warning: /etc/init.d/opendj missing LSB information
update-rc.d: see <http://wiki.debian.org/LSBInitScripts>
Adding system startup for /etc/init.d/opendj ...
/etc/rc0.d/K20opendj -> ../init.d/opendj
/etc/rc1.d/K20opendj -> ../init.d/opendj
/etc/rc6.d/K20opendj -> ../init.d/opendj
/etc/rc2.d/S20opendj -> ../init.d/opendj
/etc/rc3.d/S20opendj -> ../init.d/opendj
/etc/rc4.d/S20opendj -> ../init.d/opendj
/etc/rc5.d/S20opendj -> ../init.d/opendj

• (Windows) Register OpenDJ as a Windows Service by using the windows-service command, described in windows-service(1) in the OpenDJ Reference, and then manage the service through Windows administration tools:

C:\path\to\opendj\bat> windows-service.bat --enableService


By default OpenDJ saves a compressed version of the server configuration used on successful startup. This ensures that the server provides a last known good configuration, which can be used as a reference or copied into the active configuration if the server fails to start with the current active configuration. It is possible, though not usually recommended, to turn this behavior off by changing the global server setting save-config-on-successful-startup to false.

3.2. Stopping a Server

Although OpenDJ directory server is designed to recover from failure and disorderly shutdown, it is safer to shut the server down cleanly, because a clean shutdown reduces startup delays during which OpenDJ server attempts to recover database backend state, and prevents situations where OpenDJ server cannot recover automatically.

Follow these steps to shut down OpenDJ server cleanly:

1. If you are stopping a replicated server permanently, for example, before decommissioning the underlying system or virtual machine, first remove the server from the replication topology:

$dsreplication \ disable \ --disableAll \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --adminPassword password \ --trustAll \ --no-prompt  This step unregisters the server from the replication topology, effectively removing its replication configuration from other servers. This step must be performed before you decommission the system, because the server must connect to its peers in the replication topology. 2. Before shutting down the system where OpenDJ server is running, and before detaching any storage used for directory data, cleanly stop the server using one of the following techniques: • Use the stop-ds command, described in stop-ds(1) in the OpenDJ Reference: $ stop-ds
• (Linux) If OpenDJ directory server was installed from a .deb or .rpm package, then service management scripts were created at setup time.

Use the service opendj stop command:

centos# service opendj stop
Stopping opendj (via systemctl):                           [  OK  ]

ubuntu$sudo service opendj stop$Stopping opendj: ... > SUCCESS.

• (UNIX) Create an RC script, and then use the script to stop the server:

$sudo create-rc-script \ --outputFile /etc/init.d/opendj \ --userName mark$ sudo /etc/init.d/opendj stop

• (Windows) Register OpenDJ as a Windows Service, and then manage the service through Windows administration tools:

C:\path\to\opendj\bat> windows-service.bat --enableService


Do not intentionally kill the OpenDJ server process unless the server is completely unresponsive.

When stopping cleanly, the server writes state information to database backends, and releases locks that it holds on database files.

3.3. Restarting a Server

Use one of the following techniques:

• Use the stop-ds command:

$stop-ds --restart  • (Linux) If OpenDJ directory server was installed from a .deb or .rpm package, then service management scripts were created at setup time. Use the service opendj restart command: centos# service opendj restart Restarting opendj (via systemctl): [ OK ]  ubuntu$ sudo service opendj restart
$Stopping opendj: ... > SUCCESS.$Starting opendj: > SUCCESS.

• (UNIX) Create an RC script, and then use the script to stop the server:

$sudo create-rc-script \ --outputFile /etc/init.d/opendj \ --userName mark$ /etc/init.d/opendj restart

• (Windows) Register OpenDJ as a Windows Service, and then manage the service through Windows administration tools:

C:\path\to\opendj\bat> windows-service.bat --enableService


3.4. Server Recovery

OpenDJ tends to show resilience when restarting after a crash or after the server process is killed abruptly. OpenDJ might have to replay the last few entries in a transaction log. Generally, OpenDJ returns to service quickly.

Database recovery messages are found in the database log file, such as /path/to/opendj/db/userRoot/dj.log.

The following example shows two example messages from the recovery log. The first message is written at the beginning of the recovery process. The second message is written at the end of the process:

111104 10:23:48:967 CONFIG [/path/to/opendj/db/userRoot]Recovery
underway, found end of log
...
111104 10:23:49:015 CONFIG [/path/to/opendj/db/userRoot]Recovery finished:
Recovery Info ...


What can take some time during server startup is preloading database content into memory when the server starts. Objects cached in memory do not survive a crash. By default, OpenDJ does not cache objects in memory before starting to accept client requests. You can, however, set the preload-time-limit property for the database cache of your backend if you do want to load objects into the database cache before OpenDJ begins accepting client connections.

Chapter 4. Managing Directory Data

This chapter covers management of LDAP Data Interchange Format (LDIF) data. In this chapter you will learn to:

• Generate test LDIF data

• Import and export LDIF data

• Perform searches and modifications on LDIF files with command-line tools

• Create and manage database backends to house directory data imported from LDIF

• Delete database backends

LDIF provides a mechanism for representing directory data in text format. LDIF data is typically used to initialize directory databases, but also may be used to move data between different directories that cannot replicate directly, or even as an alternative backup format.

4.1. Generating Test Data

When you install OpenDJ, you have the option of importing sample data that is generated during the installation. This procedure demonstrates how to generate LDIF by using the make-ldif command, described in make-ldif(1) in the OpenDJ Reference.

Procedure 4.1. To Generate Test LDIF Data

The make-ldif command uses templates to provide sample data. Default templates are located in the /path/to/opendj/config/MakeLDIF/ directory. The example.template file can be used to create a suffix with entries of the type inetOrgPerson. You can do the equivalent in OpenDJ control panel (Directory Data > New Base DN... > Import Automatically Generated Example Data).

1. Write a file to act as the template for your generated LDIF.

The resulting test data template depends on what data you expect to encounter in production. Base your work on your knowledge of the production data, and on the sample template, /path/to/opendj/config/MakeLDIF/example.template, and associated data.

See make-ldif.template(5) in the OpenDJ Reference for reference information about template files.

2. Create additional data files for the content in your template to be selected randomly from a file, rather than generated by an expression.

Additional data files are located in the same directory as your template file.

3. Decide whether you want to generate the same test data each time you run the make-ldif command with your template.

If so, provide the same randomSeed integer each time you run the command.

4. Before generating a very large LDIF file, make sure you have enough space on disk.

5. Run the make-ldif command to generate your LDIF file:

$make-ldif \ --randomSeed 0 \ --templateFile /path/to/my.template \ --ldifFile /path/to/generated.ldif Processed 1000 entries Processed 2000 entries ... Processed 10000 entries LDIF processing complete. 10003 entries written  4.2. Importing and Exporting Data You can use OpenDJ control panel to import data (Directory Data > Import LDIF) and to export data (Directory Data > Export LDIF). The following procedures demonstrate how to use the import-ldif and export-ldif commands, described in import-ldif(1) in the OpenDJ Reference and export-ldif(1) in the OpenDJ Reference. Procedure 4.2. To Import LDIF Data The most efficient method of importing LDIF data is to take the OpenDJ server offline. Alternatively, you can schedule a task to import the data while the server is online. Note Importing from LDIF overwrites all data in the target backend with entries from the LDIF data. 1. If you do not want to use the default userRoot backend, create a new backend for your data. See Section 4.4, "Creating a New Database Backend" for details. 2. The following example imports dc=example,dc=org data into the userRoot backend, overwriting existing data: • If you want to speed up the process—for example because you have millions of directory entries to import—first shut down the server, and then run the import-ldif command: $ stop-ds
$import-ldif \ --includeBranch dc=example,dc=org \ --backendID userRoot \ --ldifFile /path/to/generated.ldif  • If not, schedule a task to import the data while online: $ import-ldif \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--includeBranch dc=example,dc=org \
--backendID userRoot \
--ldifFile /path/to/generated.ldif \
--trustAll


Notice that the task is scheduled through communication over SSL on the administration port, by default 4444. You can schedule the import task to start at a particular time using the --start option.

The --trustAll option trusts all SSL certificates, such as a default self-signed certificate used for testing.

3. If the server is replicated with other servers, initialize replication again after the successful import.

For details see Section 8.3.2, "Initializing Replicas".

Initializing replication overwrites data in the remote servers in the same way that import overwrites existing data with LDIF data.

Procedure 4.3. To Export LDIF Data

The following examples export dc=example,dc=org data from the userRoot backend:

1. To expedite export, shut down the server and then use the export-ldif command:

$stop-ds$ export-ldif \
--includeBranch dc=example,dc=org \
--backendID userRoot \
--ldifFile /path/to/backup.ldif

2. To export the data while online, leave the server running and schedule a task:

$export-ldif \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --includeBranch dc=example,dc=org \ --backendID userRoot \ --ldifFile /path/to/backup.ldif \ --start 20111221230000 \ --trustAll  The --start 20111221230000 option tells OpenDJ to start the export at 11 PM on December 21, 2012. If OpenDJ is stopped at this time, then when you start OpenDJ again, the server attempts to perform the task after starting up. 4.3. Other Tools For Working With LDIF Data This section demonstrates the ldifsearch, ldifmodify and ldif-diff commands, described in ldifsearch(1) in the OpenDJ Reference, ldifmodify(1) in the OpenDJ Reference, and ldif-diff(1) in the OpenDJ Reference. 4.3.1. Searching in LDIF With ldifsearch The ldifsearch command is to LDIF files what the ldapsearch command is to directory servers: $ ldifsearch \
--baseDN dc=example,dc=org \
--ldifFile generated.ldif \
"(sn=Grenier)" \
mobile
dn: uid=user.4630,ou=People,dc=example,dc=org
mobile: +1 728 983 6669


The --ldifFile ldif-file option replaces the --hostname and --port options used to connect to an LDAP directory. Otherwise, the command syntax and LDIF output is familiar to ldapsearch users.

4.3.2. Updating LDIF With ldifmodify

The ldifmodify command lets you apply changes to LDIF files, generating a new, changed version of the original file:

$cat changes.ldif dn: uid=user.0,ou=People,dc=example,dc=org changetype: modify replace: description description: This is the new description for Aaccf Amar. - replace: initials initials: AAA$ ldifmodify \
--sourceLDIF generated.ldif \
--changesLDIF changes.ldif \
--targetLDIF new.ldif


Notice that the resulting new LDIF file is likely to be about the same size as the source LDIF file.

4.3.3. Comparing LDIF With ldif-diff

The ldif-diff command reports differences between two LDIF files in LDIF format:

$ldif-diff --sourceLDIF old.ldif --targetLDIF new.ldif dn: uid=user.0,ou=People,dc=example,dc=org changetype: modify add: initials initials: AAA - delete: initials initials: ASA - add: description description: This is the new description for Aaccf Amar. - delete: description description: This is the description for Aaccf Amar.  The ldif-diff command reads both files into memory, and constructs tree maps to perform the comparison. The command is designed to work with small files and fragments, and can quickly run out of memory when calculating differences between large files. 4.4. Creating a New Database Backend OpenDJ stores your directory data in a backend. A backend is a repository that a directory server can access to store data. OpenDJ directory server offers different implementations, such as memory backends, LDIF file backends, and database backends. Database backends can be backed up and restored. By default, OpenDJ stores your data in a database backend named userRoot. You can create new backends using the dsconfig create-backend command, described in dsconfig create-backend(1) in the OpenDJ Reference. OpenDJ directory server supports a variety of backend types, including in-memory backends, backends that store data in LDIF files, and backends that store data in key-value databases with indexes to improve performance with large data sets. When you create a backend, choose the type of backend that fits your purpose. The following example creates a backend named myData. The backend is of type pdb, which relies on a PDB database for data storage and indexing. Alternatively, you can choose a different backend type with a different argument to the --type option, as in --type je: $ dsconfig \
create-backend \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--type pdb \
--backend-name myData \
--set base-dn:dc=example,dc=com \
--set enabled:true \
--set db-cache-percent:25 \
--trustAll \
--no-prompt


Notice the setting db-cache-percent:25. This says to allocate 25% of memory available to the JVM to the new backend's database cache. The default setting for db-cache-percent allocates 50%. When creating a new database backend, take care to keep the total memory allocated to all database caches lower than the total memory available to the JVM. As an alternative to db-cache-percent, you can use db-cache-size. The db-cache-size value is a specific amount of memory, such as 2 GB.

After creating the backend, you can view the settings as in the following example:

$dsconfig \ get-backend-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name myData \ --trustAll \ --no-prompt Property : Value(s) ------------------:-------------------- backend-id : myData base-dn : "dc=example,dc=com" compact-encoding : true db-cache-percent : 25 db-cache-size : 0 b db-directory : db enabled : true index-entry-limit : 4000 writability-mode : enabled  Alternatively, you can create a new backend in OpenDJ control panel (Directory Data > New Base DN > Backend > New Backend: backend-name). When you create a new backend using the dsconfig command, OpenDJ directory server creates the following indexes automatically:  aci presence ds-sync-conflict equality ds-sync-hist ordering entryUUID equality objectClass equality You can create additional indexes as described in Section 7.4, "Configuring and Rebuilding Indexes". 4.5. Encrypting Directory Data OpenDJ directory server can encrypt directory data before storing it in a database backend on disk, keeping the data confidential until it is accessed by a directory client. Data encryption is useful for at least the following cases: Ensuring Confidentiality and Integrity Encrypted directory data is confidential, remaining private until decrypted with a proper key. Encryption ensures data integrity at the moment it is accessed. OpenDJ directory cannot decrypt corrupted data. Protection on a Shared Infrastructure When you deploy directory services on a shared infrastructure you relinquish full and sole control of directory data. For example, if OpenDJ directory server runs in the cloud, or in a data center with shared disks, the file system and disk management are not under your control. Data confidentiality and encryption come with the following trade-offs: Equality Indexes Limited to Equality Matching When an equality index is configured without confidentiality, the values can be maintained in sorted order. A non-confidential, cleartext equality index can therefore be used for searches that require ordering and searches that match an initial substring. An example of a search that requires ordering is a search with a filter "(cn<=App)". The filter matches entries with commonName up to those starting with App (case-insensitive) in alphabetical order. An example of a search that matches an initial substring is a search with a filter "(cn=A*)". The filter matches entries having a commonName that starts with a (case-insensitive). In an equality index with confidentiality enabled, OpenDJ directory server no longer sorts cleartext values. As a result, you must accept that ordering and initial substring searches are unindexed. Performance Impact Encryption and decryption requires more processing than handling cleartext values. Encrypted values also take up more space than cleartext values. OpenDJ directory server provides this data confidentiality without requiring you to supply a key for encryption and decryption. It encrypts the data using a symmetric key that is stored with the server configuration (under cn=admin data in the admin-backend). The symmetric key is encrypted in turn with the server's private key that is also stored with the server configuration (admin-keystore). When multiple servers are configured to replicate data as described in Chapter 8, "Managing Data Replication", the servers replicate the keys as well, allowing any server replica to decrypt any other replica's encrypted data. OpenDJ directory server generates a secret key the first time it must encrypt data. That key is then shared across the replication topology as necessary, or until it is marked as compromised. (For details regarding compromised keys, see Section 22.7.2, "Handling Compromised Keys".) As explained in Section 19.9, "Protect OpenDJ Directory Server Files", OpenDJ directory server does not encrypt directory data by default. This means that any user with system access to read directory files can potentially access directory data in cleartext: $ strings /path/to/opendj/db/userRoot/dj* | grep bjensen | sort | uniq
'uid=bjensen,ou=People,dc=example,dc=com
/home/bjensen
bjensen
bjensen@example.com


To maintain data confidentiality on disk, you must configure it explicitly. In addition to preventing read access by other users as described in Section 19.1, "Setting Up a System Account for OpenDJ Directory Server", you can configure confidentiality for database backends. When confidentiality is enabled for a backend, OpenDJ directory server encrypts entries before storing them in the backend.

Important

Encrypting stored directory data does not prevent it from being sent over the network in the clear.

Apply the suggestions in Section 19.7, "Protect Directory Server Network Connections" to protect data sent over the network.

Enable backend confidentiality with the default encryption settings as shown in the following example that applies to the userRoot backend:

$dsconfig \ set-backend-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --set confidentiality-enabled:true \ --no-prompt \ --trustAll  After confidentiality is enabled, entries are encrypted when next written. That is, OpenDJ directory server does not automatically rewrite all entries in encrypted form. Instead, it encrypts each entry on update, for example, when a user updates their entry or when you import data. The settings for data confidentiality depend on the encryption capabilities of the JVM. For example, for details about the Sun/Oracle Java implementation, see the explanations in javax.crypto.Cipher. You can accept the default settings, or choose to specify the following: • The cipher algorithm defining how the cleartext is encrypted and decrypted. • The cipher mode of operation defining how a block cipher algorithm should transform data larger than a single block. • The cipher padding defining how to pad the cleartext to reach appropriate size for the algorithm. • The cipher key length, where longer key lengths strengthen encryption at the cost of more performance impact. The default settings for confidentiality are cipher-transformation: AES/CBC/PKCS5Padding and cipher-key-length: 128. This means the algorithm is the Advanced Encryption Standard (AES), the cipher mode is Cipher Block Chaining (CBC), and the padding is PKCS#5 padding as described in RFC 2898: PKCS #5: Password-Based Cryptography Specification. The syntax for the cipher-transformation is algorithm/mode/padding, and all three must be specified. When the algorithm does not require a mode, use NONE. When the algorithm does not require padding, use NoPadding. Use of larger cipher-key-length values can require that you install JCE policy files such as those for unlimited strength. OpenDJ directory server encrypts data using a symmetric key that is stored with the server configuration. The symmetric key is encrypted in turn with the server's private key that is also stored with the server configuration. When multiple servers are configured to replicate data as described in Section 8.3, "Configuring Replication", the servers replicate the keys as well, allowing any server replica to decrypt the data. In addition to entry encryption, you can enable confidentiality by backend index, as long as confidentiality is enabled for the backend itself. Confidentiality hashes keys for equality type indexes using SHA-1, and encrypts the list of entries matching a substring key for substring indexes. The following example shows how to enable confidentiality for the mail index: $ dsconfig \
set-backend-index-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--backend-name userRoot \
--index-name mail \
--set confidentiality-enabled:true \
--no-prompt \
--trustAll


After changing the index configuration, you can rebuild the index to enforce confidentiality immediately. For details, see Section 7.4, "Configuring and Rebuilding Indexes".

Avoid using sensitive attributes in VLV indexes. Confidentiality cannot be enabled for VLV indexes.

Encrypting and decrypting data comes with costs in terms of cryptographic processing that reduces throughput and of extra space for larger encrypted values. In general, tests with default settings show that the cost of enabling confidentiality can be quite modest, but your results can vary based on your systems and on the settings used for cipher-transformation and cipher-key-length. Make sure you test your deployment to qualify the impact of confidentiality before enabling it in production.

4.6. Setting Disk Space Thresholds For Database Backends

Directory data growth depends on applications that use the directory. As a result, when directory applications add more data than they delete, the database backend grows until it fills the available disk space. The system can end up in an unrecoverable state if no disk space is available.

Database backends therefore have advanced properties, disk-low-threshold and disk-full-threshold. When available disk space falls below disk-low-threshold, OpenDJ server only allows updates from users and applications that have the bypass-lockdown privilege, as described in Section 6.2, "About Privileges". When available space falls below disk-full-threshold, OpenDJ server stops allowing updates, instead returning an UNWILLING_TO_PERFORM error to each update request.

OpenDJ server continues to apply replication updates without regard to the thresholds. OpenDJ server can therefore fill available disk space despite the thresholds, by accepting replication updates made on other servers. You can give yourself more time to react to the situation both by monitoring directory data growth and also by increasing the thresholds.

If growth across the directory service tends to happen quickly, set the thresholds higher than the defaults to allow more time to react when growth threatens to fill the disk. The following example sets disk-low-threshold to 2 GB disk-full-threshold to 1 GB for the userRoot backend:

$dsconfig \ set-backend-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --set "disk-low-threshold:2 GB" \ --set "disk-full-threshold:1 GB" \ --trustAll \ --no-prompt  The properties disk-low-threshold and disk-full-threshold are listed as advanced properties. To examine their values with the dsconfig command, use the --advanced option as shown in the following example: $ dsconfig \
get-backend-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--backend-name userRoot \
--property disk-low-threshold \
--property disk-full-threshold \
--trustAll \
--no-prompt
Property            : Value(s)
--------------------:---------
disk-full-threshold : 1 gb
disk-low-threshold  : 2 gb


4.7. Updating an Existing Backend to Add a New Base DN

In addition to letting you create new backends as described in Section 4.4, "Creating a New Database Backend", OpenDJ lets you add a new base DN to an existing backend.

The following example adds the suffix o=example to the existing backend userRoot:

$dsconfig \ set-backend-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --add base-dn:o=example \ --trustAll \ --no-prompt$ dsconfig \
get-backend-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--backend-name userRoot \
--property base-dn \
--trustAll \
--no-prompt
Property : Value(s)
---------:-------------------------------
base-dn  : "dc=example,dc=com", o=example


Alternatively, you can update an existing backend in OpenDJ control panel (Directory Data > New Base DN, then select the existing backend from the dropdown Backend list, and enter the new Base DN name).

4.8. Deleting a Database Backend

You delete a database backend by using the dsconfig delete-backend command, described in dsconfig delete-backend(1) in the OpenDJ Reference.

When you delete a database backend by using the dsconfig delete-backend command, OpenDJ does not actually remove the database files for two reasons. First, a mistake could potentially cause lots of data to be lost. Second, deleting a large database backend could cause severe service degradation due to a sudden increase in I/O load.

Instead, after you run the dsconfig delete-backend command you must also manually remove the database backend files.

If you do run the dsconfig delete-backend command by mistake and have not yet deleted the actual files, then you can recover from the mistake by creating the backend again, reconfiguring the indexes that were removed, and rebuilding the indexes as described in Section 7.4, "Configuring and Rebuilding Indexes".

Chapter 5. Configuring Connection Handlers

This chapter shows you how to configure OpenDJ directory server to listen for directory client requests using connection handlers. You can view information about connection handlers in the OpenDJ control panel, and update the configuration using the dsconfig command, described in dsconfig(1) in the OpenDJ Reference.

In this chapter you will learn to:

• Enable client applications to access the directory over LDAP and secure LDAP (LDAPS)

• Enable client applications to access the directory over HTTP whether using DSML, or the REST style

• Enable monitoring using Java Management Extensions (JMX), or over Simple Network Management Protocol (SNMP)

• Enable automated processing of LDIF files

• Configure restrictions for client access such as requiring authentication or limiting the maximum number of concurrent connections

• Configure transport layer security for all relevant protocols

5.1. LDAP Client Access

You configure LDAP client access by using the command-line tool dsconfig. By default you configure OpenDJ to listen for LDAP when you install.

The standard port number for LDAP client access is 389. If you install OpenDJ directory server as a user who can use port 389 and the port is not yet in use, then 389 is the default port number presented at installation time. If you install as a user who cannot use a port < 1024, then the default port number presented at installation time is 1389.

Procedure 5.1. To Change the LDAP Port Number
1. Change the port number using the dsconfig command:

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "LDAP Connection Handler" \ --set listen-port:11389 \ --trustAll \ --no-prompt  This example changes the port number to 11389 in the configuration. 2. Restart the connection handler so the change takes effect. To restart the connection handler, you disable it, then enable it again: $ dsconfig \
set-connection-handler-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--handler-name "LDAP Connection Handler" \
--set enabled:false \
--trustAll \
--no-prompt

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "LDAP Connection Handler" \ --set enabled:true \ --trustAll \ --no-prompt  5.2. Preparing For Secure Communications One common way to protect connections between OpenDJ and client applications involves using StartTLS for LDAP or LDAPS to secure connections. OpenDJ and client applications use X.509 digital certificates to set up secure connections. Both OpenDJ and client applications check that certificates are signed by a trusted party before accepting them. Merely setting up a secure connection therefore involves a sort of authentication using certificates. If either OpenDJ or the client application cannot trust the peer certificate, then the attempt to set up a secure connection will fail. By default OpenDJ client tools prompt you if they do not recognize the server certificate. Other clients might not prompt you. OpenDJ server has no one to prompt when a client presents a certificate that cannot be trusted, so refuses to set up the connection.[8] In other words, it is important for both OpenDJ and client applications to be able to verify that peer certificates exchanged have been signed by a trusted party. In practice, this means that both OpenDJ and client applications must put the certificates that were used to sign each others' certificates in their respective truststores. Conventionally, certificates are therefore signed by a Certificate Authority (CA). A CA is trusted to sign other certificates. The Java runtime environment, for example, comes with a truststore holding certificates from many well-known CAs.[9] If your client uses a valid certificate signed by one of these CAs, then OpenDJ can verify the certificate without additional configuration, because OpenDJ can find the CA certificate in the Java CA certificate truststore. Likewise, if you set up StartTLS or LDAPS in OpenDJ using a valid certificate signed by one of these CAs, then many client applications can verify the OpenDJ server certificate without further configuration. In summary, if you need a certificate to be recognized automatically, get the certificate signed by a well-known CA. You can, however, choose to have your certificates signed some other way. You can set up your own CA. You can use a CA whose signing certificate is not widely distributed. You can also use self-signed certificates. In each case, you must add the signing certificates into the truststore of each peer making secure connections. For OpenDJ directory server, you can choose to import your own CA-signed certificate as part of the installation process, or later using command-line tools. Alternatively, you can let the OpenDJ installation program create a self-signed certificate as part of the OpenDJ installation process. In addition, you can add a signing certificate to the OpenDJ truststore using the Java keytool command. The following example shows the keytool command to add a client application's binary format, self-signed certificate to the OpenDJ truststore (assuming OpenDJ is already configured to use secure connections). This enables OpenDJ to recognize the self-signed client application certificate. By definition a self-signed certificate is itself the signing certificate. Notice that the Owner and the Issuer are the same: $ keytool \
-import \
-alias myapp-cert \
-file myapp-cert.crt \
-keystore /path/to/opendj/config/truststore \
-storepass cat /path/to/opendj/config/keystore.pin
Owner: CN=My App, OU=Apps, DC=example, DC=com
Issuer: CN=My App, OU=Apps, DC=example, DC=com
Serial number: 5ae2277
Valid from: Fri Jan 18 18:27:09 CET 2013 until: Thu Jan 13 18:27:09 CET 2033
Certificate fingerprints:
MD5:  48:AC:F9:13:11:E0:AB:C4:65:A2:83:9E:DB:FE:0C:37
SHA1: F9:61:54:37:AA:C1:BC:92:45:07:64:4B:23:6C:BC:C9:CD:1D:44:0F
SHA256: 2D:B1:58:CD:33:40:E9:ED:...:EA:C9:FF:6A:19:93:FE:E4:84:E3
Signature algorithm name: SHA256withRSA
Version: 3

Extensions:

#1: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: 54 C0 C5 9C 73 37 85 4B   F2 3B D3 37 FD 45 0A AB  T...s7.K.;.7.E..
0010: C9 6B 32 95                                        .k2.
]
]

Trust this certificate? [no]:  yes
Certificate was added to keystore


When working with a certificate in printable encoding format (.pem) rather than binary format, use the -rfc option, too.

Restart OpenDJ after adding certificates to the truststore to make sure that OpenDJ reads the updated truststore file.

On the client side, if your applications are Java applications, then you can also import the OpenDJ signing certificate into the trust store for the applications using the keytool command.

The following example shows the keytool command to export the OpenDJ self-signed certificate in binary format:

$keytool \ -export \ -alias server-cert \ -file server-cert.crt \ -keystore /path/to/opendj/config/keystore \ -storepass cat /path/to/opendj/config/keystore.pin Certificate stored in file <server-cert.crt>  Importing the server certificate is similar to importing the client certificate, as shown above. The following sections describe how to get and install certificates for OpenDJ directory server on the command-line, for use when setting up StartTLS or LDAPS. Procedure 5.2. To Request and Install a CA-Signed Certificate First, create a server private key and public key certificate in a Java Keystore. Next, issue a signing request to the CA, and get the CA-signed certificate as a reply. Then, set up the key manager provider and trust manager provider to rely on your new server certificate stored in the OpenDJ keystore. 1. Generate the server private key and public key certificate by using the Java keytool command. The FQDN for OpenDJ directory server, which you can see under Server Details in the OpenDJ control panel, is set both as a DNSName in the certificate's SubjectAlternativeName list, and also in the CN of the certificate's subject name DN for backwards compatibility: $ keytool \
-genkey \
-alias server-cert \
-keyalg rsa \
-ext "san=dns:opendj.example.com" \
-dname "CN=opendj.example.com,O=Example Corp,C=FR" \
-keystore /path/to/opendj/config/keystore \
-storepass changeit \
-keypass changeit


Note

Notice that the -storepass and -keypass options take identical password arguments. OpenDJ requires that you use the same password to protect both the keystore and the private key.

If the server can respond on multiple FQDNs, then specify multiple subject alternative names when using the keytool command's -ext option. In the following example the primary FQDN is opendj.example.com and the alternative is ldap.example.com:

$keytool \ -genkey \ -alias server-cert \ -keyalg rsa \ -ext "san=dns:opendj.example.com,dns:ldap.example.com" \ -dname "CN=opendj.example.com,O=Example Corp,C=FR" \ -keystore /path/to/opendj/config/keystore \ -storepass changeit \ -keypass changeit  2. Create a certificate signing request file for the certificate you generated: $ keytool \
-certreq \
-alias server-cert \
-keystore /path/to/opendj/config/keystore \
-storepass changeit \
-file server-cert.csr

3. Have the CA sign the request (server-cert.csr).

See the instructions from your CA on how to provide the request.

The CA returns the signed certificate.

4. If you have set up your own CA and signed the certificate, or are using a CA whose signing certificate is not included in the Java runtime environment, import the CA certificate into the keystore so that it can be trusted.

Otherwise, when you import the signed certificate in the reply from the (unknown) CA, keytool fails to import the signed certificate with the message keytool error: java.lang.Exception: Failed to establish chain from reply.

The following example illustrates the import of a CA certificate created with the openssl command. See the openssl documentation for instructions on creating CAs and on signing other certificates with the CA you created:

$keytool \ -import \ -trustcacerts \ -keystore /path/to/opendj/config/keystore \ -file ca.crt \ -alias ca-cert \ -storepass changeit Owner: EMAILADDRESS=admin@example.com, CN=Example CA, O=Example Corp, C=FR Issuer: EMAILADDRESS=admin@example.com, CN=Example CA, O=Example Corp, C=FR Serial number: d4586ea05c878b0c Valid from: Tue Jan 29 09:30:31 CET 2013 until: Mon Jan 24 09:30:31 CET 2033 Certificate fingerprints: MD5: 8A:83:61:9B:E7:18:A2:21:CE:92:94:96:59:68:60:FA SHA1: 01:99:18:38:3A:57:D7:92:7B:D6:03:8C:7B:E4:1D:37:45:0E:29:DA SHA256: 5D:20:F1:86:CC:CD:64:50:...:DF:15:43:07:69:44:00:FB:36:CF Signature algorithm name: SHA1withRSA Version: 3 Extensions: #1: ObjectId: 2.5.29.35 Criticality=false AuthorityKeyIdentifier [ KeyIdentifier [ 0000: 30 07 67 7D 1F 09 B6 E6 90 85 95 58 94 37 FD 31 0.g........X.7.1 0010: 03 D4 56 7B ..V. ] [EMAILADDRESS=admin@example.com, CN=Example CA, O=Example Corp, C=FR] SerialNumber: [ d4586ea0 5c878b0c] ] #2: ObjectId: 2.5.29.19 Criticality=false BasicConstraints:[ CA:true PathLen:2147483647 ] #3: ObjectId: 2.5.29.14 Criticality=false SubjectKeyIdentifier [ KeyIdentifier [ 0000: 30 07 67 7D 1F 09 B6 E6 90 85 95 58 94 37 FD 31 0.g........X.7.1 0010: 03 D4 56 7B ..V. ] ] Trust this certificate? [no]: yes Certificate was added to keystore  5. Import the signed certificate from the CA reply into the keystore where you generated the server certificate. In this example the certificate from the reply is ~/Downloads/server-cert.crt: $ keytool \
-import \
-trustcacerts \
-alias server-cert \
-keystore /path/to/opendj/config/keystore \
-storepass changeit \
-keypass changeit
Certificate reply was installed in keystore

6. Configure the file-based key manager provider for the Java Keystore (JKS) to use the file name and keystore PIN that you set up with the keytool command:

$dsconfig \ set-key-manager-provider-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name JKS \ --set enabled:true \ --set key-store-pin:changeit \ --remove key-store-pin-file:config/keystore.pin \ --trustAll \ --no-prompt  7. Configure the file-based trust manager provider. By convention and by default, the OpenDJ file-based trust manager provider uses a JKS file, opendj/config/truststore, to hold trusted public key certificates. Follow these steps to set up the truststore file, and to configure the trust manager provider. 1. If you imported your own CA certificate into the keystore, also import the file into the truststore: $ keytool \
-import \
-trustcacerts \
-keystore /path/to/opendj/config/truststore \
-file ca.crt \
-alias ca-cert \
-storepass changeit
Owner: EMAILADDRESS=admin@example.com, CN=Example CA, O=Example Corp, C=FR
Issuer: EMAILADDRESS=admin@example.com, CN=Example CA, O=Example Corp, C=FR
Serial number: d4586ea05c878b0c
Valid from: Tue Jan 29 09:30:31 CET 2013 until: Mon Jan 24 09:30:31 CET 2033
Certificate fingerprints:
MD5:  8A:83:61:9B:E7:18:A2:21:CE:92:94:96:59:68:60:FA
SHA1: 01:99:18:38:3A:57:D7:92:7B:D6:03:8C:7B:E4:1D:37:45:0E:29:DA
SHA256: 5D:20:F1:86:CC:CD:64:50:...:DF:15:43:07:69:44:00:FB:36:CF
Signature algorithm name: SHA1withRSA
Version: 3

Extensions:

#1: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: 30 07 67 7D 1F 09 B6 E6   90 85 95 58 94 37 FD 31  0.g........X.7.1
0010: 03 D4 56 7B                                        ..V.
]
SerialNumber: [    d4586ea0 5c878b0c]
]

#2: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:true
PathLen:2147483647
]

#3: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: 30 07 67 7D 1F 09 B6 E6   90 85 95 58 94 37 FD 31  0.g........X.7.1
0010: 03 D4 56 7B                                        ..V.
]
]

Trust this certificate? [no]:  yes
Certificate was added to keystore

2. Import the signed server certificate into the truststore:

$keytool \ -import \ -trustcacerts \ -alias server-cert \ -file ~/Downloads/server-cert.crt \ -keystore /path/to/opendj/config/truststore \ -storepass changeit \ -keypass changeit Certificate was added to keystore  3. Configure the file-based trust manager provider to use the truststore: $ dsconfig \
set-trust-manager-provider-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--provider-name JKS \
--set enabled:true \
--set trust-store-file:config/truststore \
--set trust-store-pin:changeit \
--trustAll \
--no-prompt


At this point, OpenDJ directory server can use your new CA-signed certificate, for example, for StartTLS and LDAPS connection handlers.

8. If you use a CA certificate that is not known to clients, such as a CA that you set up yourself rather than a well-known CA whose certificate is included with the client system, import the CA certificate into the client application truststore. Otherwise the client application cannot trust the signature on the OpenDJ CA-signed server certificate.

Procedure 5.3. To Create and Install a Self-Signed Certificate

If you choose to configure LDAP secure access when setting up OpenDJ directory server, the setup program generates a key pair in the JKS /path/to/opendj/config/keystore, and self-signs the public key certificate, which has the alias server-cert. The password for the keystore and the private key is stored in cleartext in the file /path/to/opendj/config/keystore.pin.

If you want to secure communications, but did not chose to configure LDAP secure access at setup time, this procedure can help. The following steps explain how to create and install a key pair with a self-signed certificate in preparation for configuring LDAPS or HTTPS. First, create a key pair in a new JKS, and then self-sign the certificate. Next, set up the key manager provider and trust manager provider to access the new server certificate in the new keystore.

To replace the existing server key pair with a self-signed certificate and new private key, first, use keytool -delete -alias server-cert to delete the existing keys, then generate a new key pair with the same alias. Either reuse the existing password in keystore.pin, or use a new password as shown in the steps below.

1. Generate the server certificate using the Java keytool command:

$keytool \ -genkey \ -alias server-cert \ -keyalg rsa \ -ext "san=dns:opendj.example.com" \ -dname "CN=opendj.example.com,O=Example Corp,C=FR" \ -keystore /path/to/opendj/config/keystore \ -storepass changeit \ -keypass changeit  In this example, OpenDJ is running on a system with fully qualified host name opendj.example.com. The JKS is created in the config directory where OpenDJ is installed, which is the default value for a JKS. Note Notice that the -storepass and -keypass options take identical password arguments. OpenDJ requires that you use the same password to protect both the keystore and the private key. If the server can respond on multiple FQDNs, then specify multiple subject alternative names when using the keytool command's -ext option. In the following example the primary FQDN is opendj.example.com and the alternative is ldap.example.com: $ keytool \
-genkey \
-alias server-cert \
-keyalg rsa \
-ext "san=dns:opendj.example.com,dns:ldap.example.com" \
-dname "CN=opendj.example.com,O=Example Corp,C=FR" \
-keystore /path/to/opendj/config/keystore \
-storepass changeit \
-keypass changeit


Keep track of the password provided to the -storepass and -keypass options.

2. Self-sign the server certificate:

$keytool \ -selfcert \ -alias server-cert \ -keystore /path/to/opendj/config/keystore \ -storepass changeit  3. Configure the file-based key manager provider for JKS to access the Java Keystore with keystore/private key password. In this example, the alias is server-cert and the password is changeit. If you are replacing a key pair with a self-signed certificate, reusing the server-cert alias and password stored in keystore.pin, then you can skip this step: $ echo changeit > /path/to/opendj/config/keystore.pin
$chmod 600 /path/to/opendj/config/keystore.pin$ dsconfig \
set-key-manager-provider-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--provider-name JKS \
--set enabled:true \
--set key-store-file:config/keystore \
--set key-store-pin-file:config/keystore.pin \
--trustAll \
--no-prompt

4. Configure the file-based trust manager provider for JKS to use the new server certificate.

By convention and by default, the OpenDJ file-based trust manager provider uses a Java Keystore file, opendj/config/truststore, to hold trusted public key certificates. Follow these steps to set up the truststore file, and to configure the trust manager provider.

1. Set up a truststore containing the server's public key certificate:

$keytool \ -export \ -alias server-cert \ -keystore /path/to/opendj/config/keystore \ -storepass changeit \ -file server-cert.crt Certificate stored in file <server-cert.crt>$ keytool \
-import \
-trustcacerts \
-alias server-cert \
-file server-cert.crt \
-keystore /path/to/opendj/config/truststore \
-storepass changeit
...
Trust this certificate? [no]:  yes
Certificate was added to keystore

2. Configure the trust manager provider to use the truststore:

$echo changeit > /path/to/opendj/config/truststore.pin$ chmod 600 /path/to/opendj/config/truststore.pin
$dsconfig \ set-trust-manager-provider-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name JKS \ --set enabled:true \ --set trust-store-file:config/truststore \ --set trust-store-pin-file:config/truststore.pin \ --trustAll \ --no-prompt  At this point, OpenDJ directory server can use your new self-signed certificate, for example, for StartTLS and LDAPS or HTTPS connection handlers. 5.3. LDAP Client Access With Transport Layer Security StartTLS negotiations start on the unsecure LDAP port, and then protect communication with the client. You can configure StartTLS during installation, or later using the dsconfig command. Procedure 5.4. To Enable StartTLS on the LDAP Port 1. Make sure you have a server certificate installed: $ keytool \
-list \
-alias server-cert \
-keystore /path/to/opendj/config/keystore \
-storepass cat /path/to/opendj/config/keystore.pin
server-cert, Jun 17, 2013, PrivateKeyEntry,
Certificate fingerprint (SHA1): 92:B7:4C:4F:2E:24:...:EB:7C:22:3F

2. Activate StartTLS on the current LDAP port:

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "LDAP Connection Handler" \ --set allow-start-tls:true \ --set key-manager-provider:JKS \ --set trust-manager-provider:JKS \ --trustAll \ --no-prompt  The change takes effect. No need to restart the server. 5.4. LDAP Client Access Over SSL You configure LDAPS (LDAP/SSL) client access by using the command-line tool dsconfig. You can opt to configure LDAPS access when you install. The standard port number for LDAPS client access is 636. If you install OpenDJ directory server as a user who can use port 636 and the port is not yet in use, then 636 is the default port number presented at installation time. If you install as a user who cannot use a port < 1024, then the default port number presented at installation time is 1636. Procedure 5.5. To Set Up LDAPS Access 1. Make sure you have a server certificate installed: $ keytool \
-list \
-alias server-cert \
-keystore /path/to/opendj/config/keystore \
-storepass cat /path/to/opendj/config/keystore.pin
server-cert, Jun 17, 2013, PrivateKeyEntry,
Certificate fingerprint (SHA1): 92:B7:4C:4F:2E:24:...:EB:7C:22:3F

2. Configure the server to activate LDAPS access:

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "LDAPS Connection Handler" \ --set listen-port:1636 \ --set enabled:true \ --set use-ssl:true \ --trustAll \ --no-prompt  This example changes the port number to 1636 in the configuration. Procedure 5.6. To Change the LDAPS Port Number 1. Change the port number using the dsconfig command: $ dsconfig \
set-connection-handler-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--handler-name "LDAPS Connection Handler" \
--set listen-port:11636 \
--trustAll \
--no-prompt


This example changes the port number to 11636 in the configuration.

2. Restart the connection handler so the change takes effect.

To restart the connection handler, you disable it, then enable it again:

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "LDAPS Connection Handler" \ --set enabled:false \ --trustAll \ --no-prompt$ dsconfig \
set-connection-handler-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--handler-name "LDAPS Connection Handler" \
--set enabled:true \
--trustAll \
--no-prompt


5.5. Restricting Client Access

Using the OpenDJ directory server global configuration properties, you can add global restrictions on how clients access the server. These settings are per server, and so must be set independently on each server in replication topology.

These global settings are fairly coarse-grained. For a full discussion of the rich set of administrative privileges and fine-grained access control instructions that OpenDJ directory server supports, see Chapter 6, "Configuring Privileges and Access Control".

Consider the following global configuration settings:

bind-with-dn-requires-password

Whether the directory server should reject any simple bind request that contains a DN but no password. Default: true

To change this setting use the following command:

$dsconfig \ set-global-configuration-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set bind-with-dn-requires-password:false \ --no-prompt  max-allowed-client-connections Restricts the number of concurrent client connections to the directory server. Default: 0, meaning no limit is set. To set a limit of 32768 use the following command: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--set max-allowed-client-connections:32768 \
--no-prompt

reject-unauthenticated-requests

Rejects any request (other than bind or StartTLS requests) received from a client that has not yet been authenticated, whose last authentication attempt was unsuccessful, or whose last authentication attempt used anonymous authentication. Default: false.

To shut down anonymous binds use the following command:

$dsconfig \ set-global-configuration-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set reject-unauthenticated-requests:true \ --no-prompt  return-bind-error-messages Does not restrict access, but by default prevents OpenDJ directory server from returning extra information about why a bind failed, as that information could be used by an attacker. Instead, the information is written to the server errors log. Default: false. To have OpenDJ return additional information about why a bind failed use the following command: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--set return-bind-error-messages:true \
--no-prompt


5.6. TLS Protocols and Cipher Suites

By default OpenDJ supports the SSL and TLS protocols and the cipher suites supported by the underlying Java virtual machine. For details see the documentation for the Java virtual machine (JVM) in which you run OpenDJ. For Oracle Java, see the Java Cryptography Architecture Oracle Providers Documentation for the The SunJSSE Provider.

To list the available protocols and cipher suites, read the supportedTLSProtocols and supportedTLSCiphers attributes of the root DSE. Install unlimited strength Java cryptography extensions for stronger ciphers:

$ldapsearch --port 1389 --baseDN "" --searchScope base "(objectclass=*)" \ supportedTLSCiphers supportedTLSProtocols dn: supportedTLSCiphers: TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 supportedTLSCiphers: TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 supportedTLSCiphers: TLS_RSA_WITH_AES_128_CBC_SHA256 supportedTLSCiphers: TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 supportedTLSCiphers: TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 supportedTLSCiphers: TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 supportedTLSCiphers: TLS_DHE_DSS_WITH_AES_128_CBC_SHA256 supportedTLSCiphers: TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA supportedTLSCiphers: TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA supportedTLSCiphers: TLS_RSA_WITH_AES_128_CBC_SHA supportedTLSCiphers: TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA supportedTLSCiphers: TLS_ECDH_RSA_WITH_AES_128_CBC_SHA supportedTLSCiphers: TLS_DHE_RSA_WITH_AES_128_CBC_SHA supportedTLSCiphers: TLS_DHE_DSS_WITH_AES_128_CBC_SHA supportedTLSCiphers: TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 supportedTLSCiphers: TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 supportedTLSCiphers: TLS_RSA_WITH_AES_128_GCM_SHA256 supportedTLSCiphers: TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 supportedTLSCiphers: TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 supportedTLSCiphers: TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 supportedTLSCiphers: TLS_DHE_DSS_WITH_AES_128_GCM_SHA256 supportedTLSCiphers: TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA supportedTLSCiphers: TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA supportedTLSCiphers: SSL_RSA_WITH_3DES_EDE_CBC_SHA supportedTLSCiphers: TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA supportedTLSCiphers: TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA supportedTLSCiphers: SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA supportedTLSCiphers: SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA supportedTLSCiphers: TLS_EMPTY_RENEGOTIATION_INFO_SCSV supportedTLSProtocols: SSLv2Hello supportedTLSProtocols: TLSv1 supportedTLSProtocols: TLSv1.1 supportedTLSProtocols: TLSv1.2  You can restrict the list of protocols and cipher suites used by setting the ssl-protocol and ssl-cipher-suite connection handler properties to include only the protocols or cipher suites you want. For example, to restrict the cipher suites to TLS_EMPTY_RENEGOTIATION_INFO_SCSV and TLS_RSA_WITH_AES_256_CBC_SHA use the dsconfig set-connection-handler-prop command as shown in the following example: $ dsconfig \
set-connection-handler-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--handler-name "LDAPS Connection Handler" \
--no-prompt \
--trustAll


This procedure can also be applied to the Administration Connector, or to HTTP connection handlers. See the dsconfig online help for details.

5.7. Client Certificate Validation and the Directory

This section clarifies the roles that client applications' X.509 digital certificates play in establishing secure connections and in authenticating the client as a directory user. Keep in mind that establishing a secure connection happens before the server handles the LDAP or HTTP requests that the client sends over the secure connection. Establishing a secure connection is handled separately from authenticating a client as a directory user, even though both processes can involve the client's certificate.

When a client and a server negotiate a secure connection over LDAPS or HTTPS, or over LDAP using the StartTLS operation, they can use public key cryptography to authenticate each other. The server, client, or both present certificates to each other. By default, OpenDJ directory server LDAPS and HTTPS connection handlers are configured to present the server certificate, and to consider the client certificate optional. The connection handlers' ssl-client-auth-policy property makes the latter behavior configurable. For the DSML and REST to LDAP gateways, HTTPS negotiation is handled by the web application container where the gateway runs. See the web application container documentation for details on configuring how the container handles the client certificate.

One step toward establishing a secure connection involves validating the certificate that was presented by the other party. Part of this is trusting the certificate. The certificate identifies the client or server and the CA certificate used to sign the client or server certificate. The validating party checks that the other party corresponds to the one identified by the certificate, and checks that the signature can be trusted. If the signature is valid, and the CA certificate used to sign the certificate can be trusted, then the certificate can be trusted. This part of the validation process is also described briefly in Section 5.2, "Preparing For Secure Communications".

Certificates can be revoked after they are signed. Therefore, the validation process can involve checking whether the certificate is still valid. Two different methods for performing this validation use the Online Certificate Status Protocol (OCSP) or Certificate Revocation Lists (CRLs). OCSP is a newer solution that provides an online service to handle the revocation check for a specific certificate. CRLs are potentially large lists of user certificates that are no longer valid or that are on hold. A CRL is signed by the CA. The validating party obtains the CRL and checks that the certificate being validated is not listed. For a brief comparison, see OCSP: Comparison to CRLs. A certificate can include links to contact the OCSP responder or to the CRL distribution point. The validating party can use these links to check whether the the certificate is still valid.

In both cases, the CA who signed the certificate acts as the OCSP responder or publishes the CRLs. When establishing a secure connection with a client application, OpenDJ directory server relies on the CA for OCSP and CRLs. This is the case even when OpenDJ is the repository for the CRLs.

OpenDJ directory server is a logical repository for certificates and CRLs. For example, OpenDJ directory server can store CRLs in a certificateRevocationList attribute as in the following example entry:

dn: cn=My CA,dc=example,dc=com
objectClass: top
objectClass: applicationProcess
objectClass: certificationAuthority
cn: My CA
authorityRevocationList;binary: Base64-encoded ARL
cACertificate;binary:: Base64-encoded CA certificate
certificateRevocationList;binary:: Base64-encoded CRL


The CRL could then be replicated to other OpenDJ directory servers for high availability. (Notice the ARL in this entry. An ARL is like a CRL, but for CA certificates.)

Again, despite being a repository for CRLs, OpenDJ directory server does not use the CRLs directly when checking a client certificate. Instead, when negotiating a secure connection, OpenDJ directory server depends on the JVM security configuration. The JVM configuration governs whether validation uses OCSP, CRLs, or both. As described in the Java PKI Programmer's Guide under Support for the CRL Distribution Points Extension, and Appendix C: On-Line Certificate Status Protocol (OCSP) Support, the JVM relies on system properties that define whether to use the CRL distribution points defined in certificates, and how to handle OCSP requests. These system properties can be set system-wide in $JAVA_HOME/lib/security/java.security ($JAVA_HOME/jre/lib/security/java.security for the JDK). The JVM handles revocation checking without OpenDJ's involvement.

After a connection is negotiated, OpenDJ directory server can authenticate a client application at the LDAP level based on the certificate. For details, see Section 2.9, "Authenticating Client Applications With a Certificate" in the OpenDJ Directory Server Developer's Guide.

OCSP and obtaining CRLs depend on network access to the CA. If OpenDJ directory servers or the DSML or REST to LDAP gateways run on a network where the CA is not accessible, and the deployment nevertheless requires OSCP or checking CRLs for client application certificates, then you must provide some alternative means to handle OCSP or CRL requests. The JVM can be configured to use a locally available OCSP responder, for example, and that OCSP responder might depend on OpenDJ directory server. If the solution depends on CRLs, you could regularly update the CRLs in the directory with copies of the CA CRLs obtained by other means.

5.8. RESTful Client Access Over HTTP

OpenDJ offers two ways to give RESTful client applications HTTP access to directory user data as JSON resources:

• Enable the listener on OpenDJ directory server to respond to REST requests.

With this approach, you do not need to install additional software.

For details, see the following procedures:

• Configure the external REST to LDAP gateway Servlet to access the directory service.

With this approach, you must install the gateway separately.

For details, see Procedure 5.11, "To Set Up OpenDJ REST to LDAP Gateway".

OpenDJ directory server also exposes administrative data over HTTP. For details, see Procedure 5.10, "To Set Up REST Access to Administrative Data".

The REST to LDAP mappings follow these rules to determine JSON property types:

• If the LDAP attribute is defined in the LDAP schema, then the REST to LDAP mapping uses the most appropriate type in JSON. For example, numbers appear as JSON numbers, and booleans as booleans.

• If the LDAP attribute only has one value, then it is returned as a scalar.

• If the LDAP attribute has multiple values, then the values are returned in an array.

Procedure 5.7. To Set Up an HTTP Connection Handler

OpenDJ directory server has a handler for HTTP connections. This handler exposes directory data over HTTP, including the RESTful API demonstrated in Chapter 1, "Performing RESTful Operations" in the OpenDJ Directory Server Developer's Guide. The HTTP connection handler is not enabled by default.

Once you enable the HTTP connection handler and at least one HTTP endpoint, client applications can connect to OpenDJ directory server over HTTP. This procedure shows you how to enable the HTTP connection handler.

After you set up the HTTP connection handler, make sure that at least one HTTP endpoint is enabled, for example by following the steps described in Procedure 5.8, "To Set Up REST Access to User Data", or the steps described in Procedure 5.10, "To Set Up REST Access to Administrative Data". It is possible to enable multiple HTTP endpoints, as long as their base paths are different.

1. Enable the connection handler:

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "HTTP Connection Handler" \ --set enabled:true \ --no-prompt \ --trustAll  2. Enable the HTTP access log: $ dsconfig \
set-log-publisher-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--publisher-name "File-Based HTTP Access Logger" \
--set enabled:true \
--no-prompt \
--trustAll


This enables the HTTP access log, opendj/logs/http-access. For details on the format of the HTTP access log, see Section 17.5, "Server Logs".

3. If necessary, change the connection handler configuration using the dsconfig command.

The following example shows how to set the port to 8443, and to configure the connection handler to use transport layer security (using the default server certificate). If you did not generate a default, self-signed certificate when installing OpenDJ directory server, see Procedure 5.3, "To Create and Install a Self-Signed Certificate", and more generally see Section 5.2, "Preparing For Secure Communications" for additional instructions including how to import a CA-signed certificate:

$dsconfig \ set-trust-manager-provider-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Blind Trust" \ --set enabled:true \ --no-prompt \ --trustAll$ dsconfig \
set-connection-handler-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--handler-name "HTTP Connection Handler" \
--set listen-port:8443 \
--set use-ssl:true \
--set key-manager-provider:JKS \
--set trust-manager-provider:"Blind Trust" \
--no-prompt \
--trustAll

$stop-ds --restart Stopping Server... .... The Directory Server has started successfully  Procedure 5.8. To Set Up REST Access to User Data The way directory data appears to client applications is configurable. You can configure one or more Rest2ldap endpoints to expose user directory data over HTTP. The mapping defined for the Rest2ldap endpoint defines a mapping between JSON resources and LDAP entries. The mapping is expressed in a configuration file, by default /path/to/opendj/config/rest2ldap/endpoints/api/example-v1.json. The configuration is described in Appendix A, "REST to LDAP Configuration" in the OpenDJ Reference. The default Rest2ldap endpoint exposes the RESTful API demonstrated in Chapter 1, "Performing RESTful Operations" in the OpenDJ Directory Server Developer's Guide. The default mapping works out of the box with Example.com data generated as part of the setup process and with example data imported from Example.ldif: 1. If necessary, change the properties of the default Rest2ldap endpoint, or create a new endpoint. A Rest2ldap HTTP endpoint named /api after its base-path is enabled by default. The base-path must be the same as the name, and is read-only after creation. By default, the /api endpoint requires authentication. The following example confirms the default values. Adjust these settings as necessary: $ dsconfig \
set-http-endpoint-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--endpoint-name /api \
--set authorization-mechanism:"HTTP Basic" \
--set config-directory:config/rest2ldap/endpoints/api \
--set enabled:true \
--no-prompt \
--trustAll


Alternatively, you can create another Rest2ldap endpoint to expose a different view of the directory data, or to publish data under an alternative base path, such as /rest:

$dsconfig \ create-http-endpoint \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --endpoint-name /rest \ --type rest2ldap-endpoint \ --set authorization-mechanism:"HTTP Basic" \ --set config-directory:config/rest2ldap/endpoints/api \ --set enabled:true \ --no-prompt \ --trustAll  2. If necessary, adjust the endpoint configuration to use an alternative HTTP authorization mechanism. By default, the Rest2ldap endpoint maps HTTP Basic authentication to LDAP authentication to set the authorization identity for operations. You can change the authorization-mechanism setting to use a different HTTP authorization mechanism as described in Procedure 5.9, "To Set Up HTTP Authorization". 3. Try reading a resource. The following example demonstrates reading the resource that corresponds to Barbara Jensen's entry as a JSON resource: $ curl http://bjensen:hifalutin@opendj.example.com:8080/api/users/bjensen
{
"_id": "bjensen",
"_rev": "000000009ce6c3c3",
"_schema": "frapi:opendj:rest2ldap:posixUser:1.0",
"_meta": {},
"displayName": ["Barbara Jensen", "Babs Jensen"],
"name": {
"givenName": "Barbara",
"familyName": "Jensen"
},
"description": "Original description",
"contactInformation": {
"telephoneNumber": "+1 408 555 1862",
},
"uidNumber": 1076,
"gidNumber": 1000,
"homeDirectory": "/home/bjensen",
"manager": {
"_id": "trigden",
"displayName": "Torrey Rigden"
}
}

4. If the HTTP connection handler is configured to use HTTPS, try reading an entry over HTTPS.

The following example writes the (self-signed) server certificate into a trust store file, and uses the file to trust the server when setting up the HTTPS connection:

$keytool \ -export \ -rfc \ -alias server-cert \ -keystore /path/to/opendj/config/keystore \ -storepass cat /path/to/opendj/config/keystore.pin \ -file server-cert.pem Certificate stored in file <server-cert.pem>$ curl \
--cacert server-cert.pem \
--user bjensen:hifalutin \
https://opendj.example.com:8443/api/users/bjensen
{
"_id": "bjensen",
"_rev": "000000009ce6c3c3",
"_schema": "frapi:opendj:rest2ldap:posixUser:1.0",
"_meta": {},
"displayName": ["Barbara Jensen", "Babs Jensen"],
"name": {
"givenName": "Barbara",
"familyName": "Jensen"
},
"description": "Original description",
"contactInformation": {
"telephoneNumber": "+1 408 555 1862",
},
"uidNumber": 1076,
"gidNumber": 1000,
"homeDirectory": "/home/bjensen",
"manager": {
"_id": "trigden",
"displayName": "Torrey Rigden"
}
}


Notice the --cacert server-cert.pem option used with the curl command. This is the way to specify a self-signed server certificate when using HTTPS.

Procedure 5.9. To Set Up HTTP Authorization

HTTP authorization mechanisms define how OpenDJ directory server authorizes client HTTP requests to directory data. Authorization mechanisms map credentials from an HTTP-based protocol, such as HTTP Basic authentication or OAuth 2.0, to LDAP credentials.

Multiple HTTP authorization mechanisms can be enabled simultaneously, and assigned to HTTP endpoints, such as Rest2ldap endpoints described in Procedure 5.8, "To Set Up REST Access to User Data" or the Admin endpoint described in Procedure 5.10, "To Set Up REST Access to Administrative Data".

By default, these HTTP authorization mechanisms are supported: [10]

HTTP Anonymous (enabled by default)

Handle anonymous HTTP requests, optionally binding with a specified DN.

If no bind DN is specified (default), anonymous LDAP requests are used.

HTTP Basic (enabled by default)

Handle HTTP Basic authentication requests by mapping the HTTP Basic identity to a user's directory account for the underlying LDAP operation.

By default, the Exact Match identity mapper with its default configuration is used to map the HTTP Basic user name to an LDAP uid. OpenDJ directory server then searches in all public naming contexts to find the user's entry based in the uid value.

HTTP OAuth2 CTS

Handle OAuth 2.0 requests as an OAuth 2.0 resource server, where OpenDJ directory server acts as an OpenAM Core Token Service (CTS) store.

When the client bearing an OAuth 2.0 access token presents the token to access the JSON resource, OpenDJ directory server tries to resolve the access token against the CTS data that it serves for OpenAM. If the access token resolves correctly (is found in the CTS data and has not expired), OpenDJ directory server extracts the user identity and OAuth 2.0 scopes. If the required scopes are present and the token is valid, it maps the user identity to a user's directory account for the underlying LDAP operation.

This mechanism makes it possible to resolve access tokens by making an internal request, avoiding a request to OpenAM. This mechanism does not, however, ensure that the token requested will have already been replicated to the directory server where the request is routed.

OpenAM's CTS store is constrained to a specific layout. The authzid-json-pointer must therefore use userName/0 for the user identifier.

HTTP OAuth2 OpenAM

Handle OAuth 2.0 requests as an OAuth 2.0 resource server, where OpenDJ directory server sends requests to OpenAM for access token resolution.

When the client bearing an OAuth 2.0 access token presents the token to access the JSON resource, OpenDJ directory server requests token information from OpenAM. If the access token is valid, OpenDJ directory server extracts the user identity and OAuth 2.0 scopes. If the required scopes are present, it maps the user identity to a user's directory account for the underlying LDAP operation.

As access token resolution requests ought to be sent over HTTPS, you can configure a trust store manager if necessary to trust the authorization server certificate, and a key store manager to obtain the OpenDJ directory server certificate if the authorization server requires mutual authentication.

HTTP OAuth2 Token Introspection (RFC7662)

Handle OAuth 2.0 requests as an OAuth 2.0 resource server, where OpenDJ directory server sends requests to an RFC 7662-compliant authorization server for access token resolution.

RFC 7662, OAuth 2.0 Token Introspection, defines a standard method for resolving access tokens. OpenDJ directory server must be registered as a client of the authorization server.

When the client bearing an OAuth 2.0 access token presents the token to access the JSON resource, OpenDJ directory server requests token introspection from the authorization server. If the access token is valid, OpenDJ directory server extracts the user identity and OAuth 2.0 scopes. If the required scopes are present, it maps the user identity to a user's directory account for the underlying LDAP operation.

As access token resolution requests ought to be sent over HTTPS, you can configure a trust store manager if necessary to trust the authorization server certificate, and a key store manager to obtain the OpenDJ directory server certificate if the authorization server requires mutual authentication.

When more than one authentication mechanism is specified, mechanisms are applied in the following order:

• If the client request has an Authorization header, and an OAuth 2.0 mechanism is specified, the server attempts to apply the OAuth 2.0 mechanism.

• If the client request has an Authorization header, or has the custom credentials headers specified in the configuration, and an HTTP Basic mechanism is specified, the server attempts to apply the Basic Auth mechanism.

• Otherwise, if an HTTP anonymous mechanism is specified, and none of the previous mechanisms apply, the server attempts to apply the mechanism for anonymous HTTP requests.

There are many possibilities when configuring HTTP authorization mechanisms. This procedure shows only one OAuth 2.0 example.

The example that follows demonstrates an OpenDJ directory server configured for tests (insecure connections) to request OAuth 2.0 token information from OpenAM. Download OpenAM from ForgeRock, https://forgerock.org/openam/.

Table 5.1. Settings for OAuth 2.0 Example With OpenAM
SettingValue
OpenAM URLhttp://openam.example.com:8088/openam
Authorization server endpoint/oauth2/tokeninfo (top-level realm)
Identity repository opendj.example.com:1389 with Example.ldif data
OAuth 2.0 client IDmyClientID
OAuth 2.0 client secretpassword
OAuth 2.0 client scopes read, uid, write
Rest2ldap configuration Default settings. See Procedure 5.8, "To Set Up REST Access to User Data".

Read the OpenAM documentation if necessary to install and configure OpenAM. Then follow these steps to try the demonstration:

1. Update the default HTTP OAuth2 OpenAM configuration:

$dsconfig \ set-http-authorization-mechanism-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --mechanism-name "HTTP OAuth2 OpenAM" \ --set enabled:true \ --set token-info-url:http://openam.example.com:8088/openam/oauth2/tokeninfo \ --no-prompt \ --trustAll  2. Update the default Rest2ldap endpoint configuration to use HTTP OAuth2 OpenAM as the authorization mechanism: $ dsconfig \
set-http-endpoint-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--endpoint-name "/api" \
--set authorization-mechanism:"HTTP OAuth2 OpenAM" \
--no-prompt \
--trustAll

3. Obtain an access token with the appropriate scopes:

$curl \ --request POST \ --user "myClientID:password" \ --data "grant_type=password&username=bjensen&password=hifalutin&scope=read%20uid%20write" \ http://openam.example.com:8088/openam/oauth2/access_token { "access_token": "token-string", "scope": "uid read write", "token_type": "Bearer", "expires_in": 3599 }  In production systems, make sure you use HTTPS when obtaining access tokens. 4. Request a resource at the Rest2ldap endpoint using HTTP Bearer authentication with the access token: $ curl \
--header "Authorization: Bearer token-string" \
http://opendj.example.com:8080/api/users/bjensen
{
"_id": "bjensen",
"_rev": "000000009ce6c3c3",
"_schema": "frapi:opendj:rest2ldap:posixUser:1.0",
"_meta": {},
"displayName": ["Barbara Jensen", "Babs Jensen"],
"name": {
"givenName": "Barbara",
"familyName": "Jensen"
},
"description": "Original description",
"contactInformation": {
"telephoneNumber": "+1 408 555 1862",
},
"uidNumber": 1076,
"gidNumber": 1000,
"homeDirectory": "/home/bjensen",
"manager": {
"_id": "trigden",
"displayName": "Torrey Rigden"
}
}


In production systems, make sure you use HTTPS when presenting access tokens.

Procedure 5.10. To Set Up REST Access to Administrative Data

By default, the HTTP connection handler exposes an Admin endpoint with base path /admin that is protected by the HTTP Basic authorization mechanism. (This endpoint is not available through the gateway.) The APIs for configuration and monitoring OpenDJ directory server are under the following endpoints:

/admin/config

Provides a REST API to directory server configuration with a JSON-based view of cn=config and the configuration backend.

Each LDAP entry maps to a resource under /admin/config, with default values shown in the resource even if they are not set in the LDAP representation.

/admin/monitor

Provides a REST API to directory server monitoring information with a read-only JSON-based view of cn=monitor and the monitoring backend.

Each LDAP entry maps to a resource under /admin/monitor.

To use the Admin endpoint APIs, follow these steps:

1. Grant users access to the endpoints as appropriate:

• For access to /admin/config, assign config-read or config-write privileges.

The following example assigns the config-read privilege to Kirsten Vaughan:

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password dn: uid=kvaughan,ou=People,dc=example,dc=com changetype: modify add: ds-privilege-name ds-privilege-name: config-read Processing MODIFY request for uid=kvaughan,ou=People,dc=example,dc=com MODIFY operation successful for DN uid=kvaughan,ou=People,dc=example,dc=com  For more detail, see Section 6.3, "Configuring Privileges". • For access to /admin/monitor, authenticated users can read information. 2. If necessary, adjust the authorization-mechanism setting for the Admin endpoint. By default, the Admin endpoint uses the HTTP Basic authorization mechanism. The HTTP Basic authorization mechanism default configuration resolves the user identity extracted from the HTTP request to an LDAP user identity as follows: 1. If the request has an Authorization: Basic header for HTTP Basic authentication, the server extracts the username and password. 2. If the request has X-OpenIDM-Username and X-OpenIDM-Password headers, the server extracts the username and password. 3. The server uses the default Exact Match identity mapper to search for a unique match between the username and the UID attribute value of an entry in the public naming contexts of the directory server. In other words, in LDAP terms, it searches under all user data base DNs for (uid=http-username). The username kvaughan maps to the example entry with DN uid=kvaughan,ou=People,dc=example,dc=com. For details on configuring HTTP authorization mechanisms, see Procedure 5.9, "To Set Up HTTP Authorization". 3. Consider protecting traffic to the Admin endpoint by using HTTPS as described in Procedure 5.7, "To Set Up an HTTP Connection Handler". 4. Test access to the endpoint as an authorized user. The examples below use the (self-signed) server certificate which the following command writes into file named server-cert.pem: $ keytool \
-export \
-rfc \
-alias server-cert \
-keystore /path/to/opendj/config/keystore \
-storepass cat /path/to/opendj/config/keystore.pin \
-file server-cert.pem
Certificate stored in file <server-cert.pem>


The following example demonstrates reading the Admin endpoint resource under /admin/config:

$curl \ --cacert server-cert.pem \ --user kvaughan:bribery \ "https://opendj.example.com:8443/admin/config/http-endpoints/%2Fadmin" { "_id" : "/admin", "_rev" : "00000000f54a6278", "_schema" : "admin-endpoint", "java-class" : "org.opends.server.protocols.http.rest2ldap.AdminEndpoint", "base-path" : "/admin", "enabled" : true, "authorization-mechanism" : "HTTP Basic" }  Notice how the path to the resource in the example above, /admin/config/http-endpoints/%2Fadmin, corresponds to the DN of the entry under cn=config, which is ds-cfg-base-path=/admin,cn=HTTP Endpoints,cn=config. The following example demonstrates reading everything under /admin/monitor: $ curl \
--cacert server-cert.pem \
--user kvaughan:bribery \
{
"result": [... many resources under /admin/monitor ...],
"resultCount": 29,
"totalPagedResultsPolicy": "NONE",
"totalPagedResults": -1,
"remainingPagedResults": -1
}

Procedure 5.11. To Set Up OpenDJ REST to LDAP Gateway

Follow these steps to set up OpenDJ REST to LDAP gateway Servlet to access your directory service.

1. Download and install the gateway as described in Procedure 1.10, "To Install OpenDJ REST to LDAP Gateway" in the OpenDJ Installation Guide.

2. Adjust the configuration for your directory service as described in Appendix A, "REST to LDAP Configuration" in the OpenDJ Reference.

5.9. DSML Client Access

Directory Services Markup Language (DSML) client access is implemented as a servlet that runs in a web application container.

You configure DSML client access by editing the WEB-INF/web.xml after you deploy the web application. In particular, you must at least set the ldap.host and ldap.port parameters if they differ from the default values, which are localhost and 389.

The list of DSML configuration parameters, including those that are optional, consists of the following:

ldap.host

Required parameter indicating the host name of the underlying directory server. Default: localhost.

ldap.port

Required parameter indicating the LDAP port of the underlying directory server. Default: 389.

ldap.userdn

Optional parameter specifying the DN used by the DSML gateway to bind to the underlying directory server. Not used by default.

ldap.userpassword

Optional parameter specifying the password used by the DSML gateway to bind to the underlying directory server. Not used by default.

ldap.authzidtypeisid

This parameter can help you set up the DSML gateway to do HTTP Basic Access Authentication, given the appropriate mapping between the user ID, and the user's entry in the directory.

Required boolean parameter specifying whether the HTTP Authorization header field's Basic credentials in the request hold a plain ID, rather than a DN. If set to true, then the gateway performs an LDAP SASL bind using SASL plain, enabled by default in OpenDJ to look for an exact match between a uid value and the plain ID value from the header. In other words, if the plain ID is bjensen, and that corresponds in the directory server to Babs Jensen's entry with DN uid=bjensen,ou=people,dc=example,dc=com, then the bind happens as Babs Jensen. Note also that you can configure OpenDJ identity mappers for scenarios that use a different attribute than uid, such as the mail attribute.

Default: false

ldap.usessl

Required parameter indicating whether ldap.port points to a port listening for LDAPS (LDAP/SSL) traffic. Default: false.

ldap.usestarttls

Required parameter indicating whether to use StartTLS to connect to the specified ldap.port. Default: false.

ldap.trustall

Required parameter indicating whether to blindly trust all certificates presented to the DSML gateway when using secure connections (LDAPS or StartTLS). Default: false.

ldap.truststore.path

Optional parameter indicating the truststore used to verify certificates when using secure connections. If you want to connect using LDAPS or StartTLS, and do not want the gateway blindly to trust all certificates, then you must set up a truststore. Not used by default.

ldap.truststore.password

Optional parameter indicating the truststore password. If you set up and configure a truststore, then you need to set this as well. Not used by default.

The DSML servlet translates between DSML and LDAP, and passes requests to the directory server. For initial testing purposes, you might try JXplorer, where DSML Service: /webapp-dir/DSMLServlet. Here, webapp-dir refers to the name of the directory in which you unpacked the DSML .war. Figure 5.1, "JXplorer Accessing OpenDJ Directory Server" shows the result.

5.10. JMX Client Access

You configure Java Management Extensions (JMX) client access by using the command-line tool, dsconfig.

Procedure 5.12. To Set Up JMX Access
1. Configure the server to activate JMX access:

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "JMX Connection Handler" \ --set enabled:true \ --trustAll \ --no-prompt  This example uses the default port number, 1689. 2. Restart the server so the change takes effect: $ stop-ds --restart

Procedure 5.13. To Configure Access To JMX

After you set up OpenDJ directory server to listen for JMX connections, you must assign privileges in order to allow a user to connect over protocol:

1. Assign the privileges, jmx-notify, jmx-read, and jmx-write as necessary to the user who connects over JMX. For details see Section 6.3, "Configuring Privileges".

2. Connect using the service URI, user name, and password:

Service URI

Full URI to the service including the hostname or IP address and port number for JMX where OpenDJ directory server listens for connections. For example, if the server IP is 192.168.0.10 and you configured OpenDJ to listen for JMX connections on port 1689, then the service URI is service:jmx:rmi:///jndi/rmi://192.168.0.10:1689/org.opends.server.protocols.jmx.client-unknown.

User name

The full DN of the user with privileges to connect over JMX such as uid=kvaughan,ou=People,dc=example,dc=com.

The bind password for the user.

5.11. LDIF File Access

The LDIF connection handler lets you make changes to directory data by placing LDIF in a file system directory that OpenDJ server regularly polls for changes. The LDIF, once consumed, is deleted.

You configure LDIF file access by using the command-line tool dsconfig.

Procedure 5.14. To Set Up LDIF File Access
1. Activate LDIF file access:

$dsconfig \ set-connection-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "LDIF Connection Handler" \ --set enabled:true \ --trustAll \ --no-prompt  The change takes effect immediately. 2. Add the directory where you put LDIF to be processed: $ mkdir /path/to/opendj/config/auto-process-ldif


This example uses the default value of the ldif-directory property for the LDIF connection handler.

5.12. SNMP Access

For instructions on setting up the SNMP connection handler, see Section 17.2, "SNMP-Based Monitoring".

[8] Unless you use the Blind Trust Manager Provider, which is recommended only for test purposes.

[9] $JAVA_HOME/jre/lib/security/cacerts holds the CA certificates. To read the full list, use the following command: $ keytool \
-list \
-v \
-keystore $JAVA_HOME/jre/lib/security/cacerts \ -storepass changeit  [10] The HTTP OAuth2 File mechanism is an internal interface intended for testing and not supported for production use. Chapter 6. Configuring Privileges and Access Control OpenDJ supports two mechanisms to protect access to the directory, access control instructions and administrative privileges. Access control instructions apply to directory data, providing fine-grained control over what a user or group member is authorized to do in terms of LDAP operations. Most access control instructions specify scopes (targets) to which they apply such that an administrative user who has all access to dc=example,dc=com need not have any access to dc=example,dc=org. Privileges control the administrative tasks that users can perform, such as bypassing the access control mechanism, performing backup and restore operations, making changes to the configuration, and other tasks. Privileges are implemented independently from access control. By default, privileges restrict administrative access to directory root users, though any user can be assigned a privilege. Privileges apply to a directory server, and do not have a scope. This chapter covers both access control and privileges. In this chapter you will learn to: • Configure privileges for directory administration • Read and write access control instructions • Configure access rights by setting access control instructions • Evaluate effective access rights for a particular user Some operations require both privileges and also access control instructions. For example, in order to reset user's passwords, an administrator needs both the password-reset privilege and also access control to write userPassword values on the user entries. By combining an access control instruction with a privilege, you can effectively restrict the scope of that privilege to a particular branch of the Directory Information Tree. 6.1. About ACIs OpenDJ directory server ACIs exist as operational aci attribute values on directory entries, and as global ACI attributes stored in the configuration. ACIs apply to a scope defined in the instruction. They set permissions that depend on what operation is requested, who requested the operation, and how the client connected to the server. For example, the ACIs on the following entry allow anonymous read access to all attributes except passwords, and allow read-write access for directory administrators under dc=example,dc=com: dn: dc=example,dc=com objectClass: domain objectClass: top dc: example aci: (target ="ldap:///dc=example,dc=com")(targetattr != "userPassword")(version 3.0;acl "Anonymous read-search access"; allow (read, search, compare)(userdn = "ldap:///anyone");) aci: (target="ldap:///dc=example,dc=com") (targetattr = "*")(version 3.0; acl "allow all Admin group"; allow(all) groupdn = "ldap:///cn=Directory Administrators,ou=Groups,dc=example,dc=com";)  OpenDJ directory server's default behavior is that no access is allowed unless it is specifically granted by an ACI. (The bypass-acl privilege, assigned to certain users such as cn=Directory Manager, can allow users to bypass access control checks.) OpenDJ directory server provides default global ACIs to facilitate evaluation while maintaining a reasonable security policy. By default, users are granted access to: • Read the root DSE • Read the LDAP schema • Use certain LDAP controls and extended operations • Modify their own entries • Read public data and operational attributes Global ACIs are defined on the access control handler, and apply to the entire directory server. You must adjust the default global ACIs to match the security policies for your organization, for example, to restrict anonymous access. ACI attribute values use a specific language described in this section. Although ACI attribute values can become difficult to read in LDIF, the basic syntax is simple: targets(version 3.0;acl "name";permissions subjects;) The following list briefly explains the variables in the syntax above: targets The targets specifies entries, attributes, controls, and extended operations to which the ACI applies. To include multiple targets, enclose each individual target in parentheses, (). When you specify multiple targets, all targets must match for the ACI to apply (AND). name Supplies a human-readable description of what the ACI does. permissions Defines which actions to allow, and which to deny. Paired with subjects. subjects Identifies clients to which the ACI applies depending on who connected, and when, where, and how they connected. Paired with permissions. Separate multiple pairs of permissions-subjects definitions with semicolons, ;. When you specify multiple permissions-subjects pairs, at least one must match (OR). 6.1.1. ACI Targets The seven types of ACI targets identify the objects to which the ACI applies. Most expressions allow you to use either = to specify that the target should match the value or != to specify that the target should not match the value: (target [!]= "ldap:///DN") Sets the scope to the entry with distinguished name DN, and to child entries. You can use asterisks, *, to replace attribute types, attribute values, and entire DN components. In other words, the following specification targets both uid=bjensen,ou=People,dc=example,dc=com and cn=My App,ou=Apps,dc=example,dc=com: (target = "ldap:///*=*,*,dc=example,dc=com") The DN must be in the subtree of the entry where the ACI is defined. If you do not specify target, then the entry holding this ACI is affected. If targetscope is also omitted, then this entry and all subordinates are affected. (targetattr [!]= "attr-list") Replace attr-list with a list of attribute type names, such as userPassword, separating multiple attribute type names with ||. This specification affects the entry where the ACI is located, or the entries specified by other targets in the ACI. You can use an asterisk, *, to specify all user attributes, although you will see better performance when explicitly including or excluding attribute types as needed. You can use a plus sign, +, to specify all operational attributes. A negated attr-list of operational attributes will only match other operational attributes and never any user attributes, and vice-versa. If you do not include this target specification, then by default no attributes are affected by the ACI. (targetfilter [!]= "ldap-filter") Sets the scope to match the ldap-filter dynamically, as in an LDAP search. The ldap-filter can be any valid LDAP filter. (targattrfilters [!]= "expression") Use this target specification when managing changes made to particular attributes. The expression takes one of the following forms. Separate expressions with semicolons (;): op=attr1:filter1[&& attr2:filter2 …][;op=attr3:filter3[&& attr4:filter4 …] …] The op can be either add for operations creating attributes, or del for operations removing them. Replace attr with an attribute type. Replace filter with an LDAP filter that corresponds to the attr attribute type. (targetscope = "base|onelevel|subtree|subordinate") • base refers to the entry with the ACI. • onelevel refers to immediate children. • subtree refers to the base entry and all children. • subordinate refers to all children only. If you do not specify targetscope, the default is subtree. (targetcontrol [!]= "OID") Replace OID with the object identifier for the LDAP control to target. Separate multiple OIDs with ||. To use an LDAP control, the bind DN user must have allow(read) permissions. This target cannot be restricted to a specific subtree by combining it with another target. (extop [!]= "OID") Replace OID with the object identifier for the extended operation to target. Separate multiple OIDs with ||. To use an LDAP extended operation, the bind DN user must have allow(read) permissions. This target cannot be restricted to a specific subtree by combining it with another target. 6.1.2. ACI Permissions ACI permission definitions take one of the following forms: allow(action[, action …]) deny(action[, action …]) Tip Although deny is supported, avoid restricting permissions by using deny. Instead, explicitly allow access only as needed. What looks harmless and simple in tests and examples can grow difficult to maintain in a real-world deployment with nested ACIs. Replace action with one of the following: add Entry creation, as for an LDAP add operation. all All permissions, except export, import, proxy. compare Attribute value comparison, as for an LDAP compare operation. delete Entry deletion, as for an LDAP delete operation. export Entry export during a modify DN operation. Despite the name, this action is unrelated to LDIF export operations. import Entry import during a modify DN operation. Despite the name, this action is unrelated to LDIF import operations. proxy Access the ACI target using the rights of another user. read Read entries and attributes, or use an LDAP control or extended operation. search Search the ACI targets. Combine with read to read the search results. selfwrite Add or delete own DN from a group. write Modify attributes on ACI target entries. 6.1.3. ACI Subjects ACI subjects match characteristics of the client connection to the server. Use subjects to restrict whether the ACI applies depending on who connected, and when, where, and how they connected. Most expressions allow you to use either = to specify that the condition should match the value or != to specify that the condition should not match the value: authmethod [!]= "none|simple|ssl|sasl mech" • none means do not check. • simple means simple authentication. • ssl refers to certificate-based authentication over LDAPS. • sasl mech refers to SASL, where mech is DIGEST-MD5, EXTERNAL, or GSSAPI. dayofweek [!]= "day[, day …]" Replace day with one of:  sun mon tue wed thu fri sat dns [!]= "hostname" Use asterisks, *, to replace name components, such as dns = "*.example.com". groupdn [!]= "ldap:///DN[|| ldap:///DN …]" Replace DN with the distinguished name of a group to permit or restrict access for members. ip [!]= "addresses" The addresses can be specified for IPv4 or IPv6. IPv6 addresses are specified in brackets as ldap://[address]/subnet-prefix where /subnet-prefix is optional. You can specify: • Individual IPv4 addresses • Addresses with asterisks (*) to replace subnets and host numbers • CIDR notation • Forms such as 192.168.0.*+255.255.255.0 to specify subnet masks ssf = "strength", ssf != "strength", ssf > "strength", ssf >= "strength", ssf < "strength", ssf <= "strength" The security strength factor (ssf) pertains to the cipher key strength for connections using DIGEST-MD5, GSSAPI, SSL, or TLS. For example, to require that the connection must have a cipher strength of at least 256 bits, specify ssf >= "256". timeofday = "hhmm", timeofday != "hhmm", timeofday > "hhmm", timeofday >= "hhmm", timeofday < "hhmm", timeofday <= "hhmm" The hhmm is expressed as on a 24-hour clock. For example, 1:15 PM is written 1315. userattr [!]= "attr#value", userattr [!]= ldap-url#LDAPURL", userattr [!]= "[parent[child-level]. ]attr#GROUPDN|USERDN" The userattr subject specifies an attribute that must match on both the bind entry and the target of the ACI. To match when the user attribute on the bind DN entry corresponds directly to the attribute on the target entry, replace attr with the user attribute type, and value with the attribute value. OpenDJ directory server performs an internal search to get the attributes of the bind entry. Therefore, this ACI subject does not work with operational attributes. To match when the target entry is identified by an LDAP URL, and the bind DN is in the subtree of the DN of the LDAP URL, use ldap-url#LDAPURL. To match when the bind DN corresponds to a member of the group identified by the attr value on the target entry, use attr#GROUPDN. To match when the bind DN corresponds to the attr value on the target entry, use attr#USERDN. The optional inheritance specification, parent[child-level]., lets you specify how many levels below the target entry inherit the ACI. The child-level is a number from 0 to 9, with 0 indicating the target entry only. Separate multiple child-level digits with commas (,). userdn [!]= "ldap-url++[|| ldap-url++ …]" To match the bind DN, replace ldap-url++ with either a valid LDAP URL, such as ldap:///uid=bjensen,ou=People,dc=example,dc=com, or ldap:///dc=example,dc=com??sub?(uid=bjensen), or a special LDAP URL-like keyword from the following list: ldap:///all Match authenticated users. ldap:///anyone Match anonymous and authenticated users. ldap:///parent Match when the bind DN is a parent of the ACI target. ldap:///self Match when the bind DN entry corresponds to ACI target. 6.1.4. How ACI is Evaluated Understanding how OpenDJ directory server evaluates the aci values is critical when implementing an access control policy. The rules the server follows are simple: 1. To determine whether an operation is allowed or denied, OpenDJ directory server looks in the directory for the target of the operation. It collects any ACI values from that entry, and then walks up the directory tree to the suffix, collecting all ACI values en route. Global ACI values are then collected. 2. It then separates the ACI values into two lists; one list contains all the ACI values that match the target and deny the required access, and the other list contains all the ACI values that match the target and allow the required access. 3. If the deny list contains any ACI values after this procedure, access is immediately denied. 4. If the deny list is empty, then the allow list is processed. If the allow list contains any ACI values, access is allowed. 5. If both lists are empty, access is denied. Note Some operations require multiple permissions and involve multiple targets. Evaluation will therefore take place multiple times. For example, a search operation requires the search permission for each attribute in the search filter. If all those are allowed, the read permission is used to decide what attributes and values can be returned. 6.1.5. ACI Required For LDAP Operations The minimal access control information required for specific LDAP operations is described here: Add The ACI must allow the add permission to entries in the target. This implicitly allows the attributes and values to be set. Use targattrfilters to explicitly deny access to any values if required. For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to add an entry is: aci: (version 3.0;acl "Add entry"; allow (add)(userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)  Bind Because this is used to establish the user's identity and derived authorizations, ACI is irrelevant for this operation and is not checked. To prevent authentication, disable the account instead. For details, see Section 11.2, "Managing Accounts Manually". Compare The ACI must allow the compare permission to the attribute in the target entry. For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to compare values against the sn attribute is: aci: (targetattr = "sn")(version 3.0;acl "Compare surname"; allow (compare)(userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)  Delete The ACI must allow the delete permission to the target entry. This implicitly allows the attributes and values in the target to be deleted. Use targattrfilters to explicitly deny access to the values if required. For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to delete an entry is: aci: (version 3.0;acl "Delete entry"; allow (delete) (userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)  Modify The ACI must allow the write permission to attributes in the target entries. This implicitly allows all values in the target attribute to be modified. Use targattrfilters to explicitly deny access to specific values if required. For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to modify the description attribute in an entry is: aci: (targetattr = "description")(version 3.0; acl "Modify description"; allow (write)(userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)  ModifyDN If the entry is being moved to a newSuperior, the export permission must be allowed on the target, and the import permission must be allowed on the newSuperior entry. The ACI must allow write permission to the attributes in the old RDN and the new RDN. All values of the old RDN and new RDN can be written implicitly; use targattrfilters to explicitly deny access to values used if required. For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to rename entries named with the uid attribute to new locations: aci: (targetattr = "uid")(version 3.0;acl "Rename uid= entries"; allow (write, import, export)(userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)  Search ACI is required to process the search filter, and to determine what attributes and values may be returned in the results. The search permission is used to allow particular attributes in the search filter. The read permission is used to allow particular attributes to be returned. If read permission is allowed to any attribute, the server automatically allows the objectClass attribute to also be read. For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to search for uid attributes, and also to read that attribute in matching entries is: aci: (targetattr = "uid")(version 3.0;acl "Search and read uid"; allow (search, read)(userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)  Use Control or Extended Operation The ACI must allow the read permission to the targetcontrol or extop OIDs. For example, the ACI required to allow uid=bjensen,ou=People,dc=example,dc=com to use the Persistent Search request control with OID 2.16.840.1.113730.3.4.3 is: aci: (targetcontrol = "2.16.840.1.113730.3.4.3")(version 3.0;acl "Request Persistent Search"; allow (read)(userdn = "ldap:///uid=bjensen,ou=People,dc=example,dc=com");)  6.2. About Privileges Privileges provide access control for server administration independently from ACIs. Directory root users, such as cn=Directory Manager, are granted privileges in the following list and marked with an asterisk (*) by default. Other administrator users can be assigned these privileges, too: backend-backup* Request a task to back up data backend-restore* Request a task to restore data from backup bypass-acl* Perform operations without regard to ACIs bypass-lockdown* Perform operations without regard to lockdown mode cancel-request* Cancel any client request changelog-read* Read the changelog (under cn=changelog) config-read* Read the server configuration config-write* Change the server configuration data-sync Perform data synchronization disconnect-client* Close any client connection jmx-notify Subscribe to JMX notifications jmx-read Read JMX attribute values jmx-write Write JMX attribute values ldif-export* Export data to LDIF ldif-import* Import data from LDIF modify-acl* Change ACIs password-reset* Reset other users' passwords privilege-change* Change the privileges assigned to users proxied-auth Use the Proxied Authorization control server-lockdown* Put the server into and take the server out of lockdown mode server-restart* Request a task to restart the server server-shutdown* Request a task to stop the server subentry-write* Perform LDAP subentry write operations unindexed-search* Search using a filter with no corresponding index update-schema* Change LDAP schema definitions 6.3. Configuring Privileges For root directory administrators, by default cn=Directory Manager, you configure default privileges using the dsconfig command as described in Procedure 6.1, "To Change Default Root DN Privileges". For all directory administrators, you can change privileges with the ldapmodify command as shown in the following procedures: Procedure 6.1. To Change Default Root DN Privileges Follow these steps to change default privileges for all Root DN administrators, whose entries are under cn=Root DNs,cn=config. 1. Start dsconfig in interactive mode: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \

2. Select the Root DN menu.

3. Select View and edit the Root DN.

4. Edit the default-root-privilege-name.

5. Make sure you apply the changes when finished.

Procedure 6.2. To Add Privileges for an Individual Administrator

Privileges are specified using the ds-privilege-name operational attribute, which you can change using the ldapmodify command.

1. Determine the privileges to add:

$cat privilege.ldif dn: uid=kvaughan,ou=People,dc=example,dc=com changetype: modify add: ds-privilege-name ds-privilege-name: config-read ds-privilege-name: password-reset  This example lets the user read the server configuration, and reset user passwords. In order for the user to be able to change a user password, you must also allow the modification using ACIs. For this example, Kirsten Vaughan is a member of the Directory Administrators group for Example.com, and already has access to modify user entries. Prior to having the privileges, Kirsten gets messages about insufficient access when trying to read the server configuration, or trying to reset a user password: $ ldapsearch \
--port 1389 \
--bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
--baseDN cn=config \
"(objectclass=*)"
SEARCH operation failed
Result Code:  50 (Insufficient Access Rights)
Additional Information:  You do not have sufficient privileges to perform
search operations in the Directory Server configuration

$ldappasswordmodify \ --port 1389 \ --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \ --bindPassword bribery \ --authzID "dn:uid=scarter,ou=People,dc=example,dc=com" \ --newPassword changeit The LDAP password modify operation failed with result code 50 Error Message: You do not have sufficient privileges to perform password reset operations  2. Apply the change as a user with the privilege-change privilege: $ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--filename privilege.ldif
Processing MODIFY request for uid=kvaughan,ou=People,dc=example,dc=com
MODIFY operation successful for DN uid=kvaughan,ou=People,dc=example,dc=com


At this point, Kirsten can perform the operations requiring privileges:

$ldapsearch \ --port 1389 \ --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \ --bindPassword bribery \ --baseDN cn=config \ "(objectclass=*)" dn: cn=config ds-cfg-return-bind-error-messages: false ds-cfg-default-password-policy: cn=Default Password Policy,cn=Password Policies, cn=config …$ ldappasswordmodify \
--port 1389 \
--bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
--authzID "dn:uid=scarter,ou=People,dc=example,dc=com" \
The LDAP password modify operation was successful

Procedure 6.3. To Add Privileges for a Group of Administrators

For deployments with more than one administrator, use groups to define administrative rights.

You can use a collective attribute subentry to specify privileges for the administrator group.

Collective attributes provide a standard mechanism for defining attributes that appear on all the entries in a particular subtree. OpenDJ directory server extends collective attributes to give you fine-grained control over which entries are in scope. In addition, OpenDJ directory sever lets you use virtual attributes, such as isMemberOf to construct the filter for targeting entries in scope. This allows you, for example, to define administrative privileges that apply to all users who belong to an administrator group:

1. Create an LDAP subentry that specifies the collective attributes:

$cat collective.ldif dn: cn=Administrator Privileges,dc=example,dc=com objectClass: collectiveAttributeSubentry objectClass: extensibleObject objectClass: subentry objectClass: top cn: Administrator Privileges ds-privilege-name;collective: config-read ds-privilege-name;collective: config-write ds-privilege-name;collective: ldif-export ds-privilege-name;collective: modify-acl ds-privilege-name;collective: password-reset ds-privilege-name;collective: proxied-auth subtreeSpecification: {base "ou=people", specificationFilter "(isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)" }$ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--filename collective.ldif
ADD operation successful for DN cn=Administrator Privileges,dc=example,dc=com


The Directory Administrators group for Example.com includes members like Kirsten Vaughan.

2. Observe that the change takes effect immediately:

$ldappasswordmodify \ --port 1389 \ --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \ --bindPassword bribery \ --authzID "dn:uid=scarter,ou=People,dc=example,dc=com" \ --newPassword changeit The LDAP password modify operation was successful  Procedure 6.4. To Limit Inherited Privileges When privileges are set as described in Procedure 6.3, "To Add Privileges for a Group of Administrators", the same list of privileges is applied to every target account. OpenDJ directory server also assigns default directory root DN privileges as described in Procedure 6.1, "To Change Default Root DN Privileges". In some cases, the list of inherited privileges can be too broad. OpenDJ directory server has a mechanism to limit effective privileges by preceding the privilege attribute value with a -. The following steps show how to prevent Kirsten Vaughan from resetting passwords when the privilege is assigned as described in Procedure 6.3, "To Add Privileges for a Group of Administrators": 1. Check the privilege settings for the account: $ ldapsearch \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com \
"(uid=kvaughan)" \
ds-privilege-name
dn: uid=kvaughan,ou=People,dc=example,dc=com
ds-privilege-name: config-write
ds-privilege-name: ldif-export
ds-privilege-name: modify-acl
ds-privilege-name: proxied-auth

2. Set the privilege attribute for the account to deny the privilege:

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password dn: uid=kvaughan,ou=people,dc=example,dc=com changetype: modify add: ds-privilege-name ds-privilege-name: -password-reset Processing MODIFY request for uid=kvaughan,ou=people,dc=example,dc=com MODIFY operation successful for DN uid=kvaughan,ou=people,dc=example,dc=com  3. Observe that the privilege is no longer in effect: $ ldappasswordmodify \
--port 1389 \
--bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
--authzID "dn:uid=scarter,ou=People,dc=example,dc=com" \
The LDAP password modify operation failed with result code 50
Error Message:  You do not have sufficient privileges to perform password
reset operations


6.4. Configuring Access Control

ACIs are defined in the data on aci attributes. They can be imported in LDIF and modified over LDAP. In order to make changes to ACIs, however, users first need the modify-acl privilege. By default, only the root DN user has the modify-acl privilege.

Global ACIs on cn=Access Control Handler,cn=config can be set using the dsconfig command. Global ACIs have attribute type ds-cfg-global-aci.

Modifying and removing global ACIs can have deleterious effects. Generally the impact depends on your deployment requirements. Modifications to global ACIs fall into the following categories:

• Modification or removal is permitted.

You must test client applications when deleting the specified ACI.

• Modification or removal may affect applications.

You must test client applications when modifying or deleting the specified ACI.

• Modification or removal may affect applications, but is not recommended.

You must test client applications when modifying or deleting the specified ACI.

• Do not modify or delete.

For details, see Table 6.1, "Default Global ACIs".

Table 6.1. Default Global ACIs
NameDescriptionACI Definition

Anonymous control access

Anonymous and authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="2.16.840.1.113730.3.4.2 || 2.16.840.1.113730.3.4.17 || 2.16.840.1.113730.3.4.19 || 1.3.6.1.4.1.4203.1.10.2 || 1.3.6.1.4.1.42.2.27.8.5.1 || 2.16.840.1.113730.3.4.16 || 1.2.840.113556.1.4.1413 || 1.3.6.1.4.1.36733.2.1.5.1") (version 3.0; acl "Anonymous control access"; allow(read) userdn="ldap:///anyone";)

Anonymous extended operation access

Anonymous and authenticated users can request the LDAP extended operations that are specified by OID. Modification or removal may affect applications.

(extop="1.3.6.1.4.1.26027.1.6.1 || 1.3.6.1.4.1.26027.1.6.3 || 1.3.6.1.4.1.4203.1.11.1 || 1.3.6.1.4.1.1466.20037 || 1.3.6.1.4.1.4203.1.11.3") (version 3.0; acl "Anonymous extended operation access"; allow(read) userdn="ldap:///anyone";)

Anonymous and authenticated users can read the user data attributes that are specified by their names. Modification or removal is permitted.

(targetattr!="userPassword||authPassword||debugsearchindex||changes||changeNumber||changeType||changeTime||targetDN||newRDN||newSuperior||deleteOldRDN")(version 3.0; acl "Anonymous read access"; allow (read,search,compare) userdn="ldap:///anyone";)

Authenticated users control access

Authenticated users can use the LDAP controls that are specified by OID. Modification or removal may affect applications.

(targetcontrol="1.3.6.1.1.12 || 1.3.6.1.1.13.1 || 1.3.6.1.1.13.2 || 1.2.840.113556.1.4.319 || 1.2.826.0.1.3344810.2.3 || 2.16.840.1.113730.3.4.18 || 2.16.840.1.113730.3.4.9 || 1.2.840.113556.1.4.473 || 1.3.6.1.4.1.42.2.27.9.5.9") (version 3.0; acl "Authenticated users control access"; allow(read) userdn="ldap:///all";)

Self entry modification

Authenticated users can modify the specified attributes on their own entries. Modification or removal is permitted.

(targetattr="audio||authPassword||description||displayName||givenName||homePhone||homePostalAddress||initials||jpegPhoto||labeledURI||mobile||pager||postalAddress||postalCode||preferredLanguage||telephoneNumber||userPassword")(version 3.0; acl "Self entry modification"; allow (write) userdn="ldap:///self";)

Authenticated users can read the password values on their own entries. By default, the server applies a one-way hash algorithm to the password value before writing it to the entry, so it is computationally difficult to recover the cleartext version of the password from the stored value. Modification or removal is permitted.

(targetattr="userPassword||authPassword")(version 3.0; acl "Self entry read"; allow (read,search,compare) userdn="ldap:///self";)

User-Visible Operational Attributes

Anonymous and authenticated users can read attributes that identify entries and that contain information about modifications to entries. Modification or removal may affect applications.

(targetattr="createTimestamp||creatorsName||modifiersName||modifyTimestamp||entryDN||entryUUID||subschemaSubentry||etag||governingStructureRule||structuralObjectClass||hasSubordinates||numSubordinates||isMemberOf")(version 3.0; acl "User-Visible Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Root DSE Operational Attributes

Anonymous and authenticated users can read attributes that describe what the server supports. Modification or removal may affect applications.

(target="ldap:///")(targetscope="base")(targetattr="objectClass||namingContexts||supportedAuthPasswordSchemes||supportedControl||supportedExtension||supportedFeatures||supportedLDAPVersion||supportedSASLMechanisms||supportedTLSCiphers||supportedTLSProtocols||vendorName||vendorVersion")(version 3.0; acl "User-Visible Root DSE Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

User-Visible Schema Operational Attributes

Anonymous and authenticated users can read LDAP schema definitions. Modification or removal may affect applications.

(target="ldap:///cn=schema")(targetscope="base")(targetattr="objectClass||attributeTypes||dITContentRules||dITStructureRules||ldapSyntaxes||matchingRules||matchingRuleUse||nameForms||objectClasses")(version 3.0; acl "User-Visible Schema Operational Attributes"; allow (read,search,compare) userdn="ldap:///anyone";)

Users with write access to add ACIs and with the modify-acl privilege can use the ldapmodify command to change ACIs located in user data.

This section focuses on ACI examples, rather than demonstrating how to update the directory for each example. To update ACIs, either change them using the ldapmodify command, or using OpenDJ control panel.

If you use OpenDJ control panel, find the entry to modify in the Manage Entries window. Then try View > LDIF View to edit the entry. The control panel checks ACI syntax and identifies errors before saving any changes.

For hints on updating directory entries with the ldapmodify command, see Section 2.4.2, "Modifying Entry Attributes" in the OpenDJ Directory Server Developer's Guide. Keep in mind that the name of the ACI attribute is aci as shown in the examples that follow.

Example 6.1. ACI: Anonymous Reads and Searches

This ACI makes all user attributes world-readable except password attributes:

aci: (target ="ldap:///dc=example,dc=com")(targetattr !=
allow (read, search, compare)(userdn = "ldap:///anyone");)


Example 6.2. ACI: Disable Anonymous Access

By default, OpenDJ directory server denies access unless an ACI explicitly allows access.[11] By default, OpenDJ directory server allows anonymous users to read public data and request certain controls and extended operations.

These default capabilities are defined in global ACIs, which you can read by using the following command:

$dsconfig \ get-access-control-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --property global-aci  You can disable anonymous access either by editing relevant global-aci properties, or by using the global server configuration property, reject-unauthenticated-requests. Editing relevant global-aci properties lets you take a fine-grained approach to limit anonymous access. Setting reject-unauthenticated-requests:true causes OpenDJ directory server to reject all requests from clients who are not authenticated except bind requests and StartTLS requests. To take a fine-grained approach, use the dsconfig command to edit global-aci properties. One of the most expedient ways to do this is to use the command interactively on one OpenDJ directory server, capturing the output to a script with the --commandFilePath script option, and then editing the script for use on other servers. With this approach, you can allow anonymous read access to the root DSE and to directory schemas so that clients do not have to authenticate to discover server capabilities, and also allow anonymous users access to request certain controls and extended operations: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--commandFilePath /tmp/captured-global-aci-edits.sh

# The dsconfig command runs interactively.

# Edit Access Control Handler, global-aci attributes replacing
# userdn="ldap:///anyone" (anonymous) with userdn="ldap:///all" (authenticated)
# in "Anonymous read access" and "User-Visible Operational Attributes" ACIs.

# To make this change, you first remove the existing values,
# then add the edited values, and finally apply the changes.


Make sure that you also set appropriate ACIs on any data that you import.

At this point, clients must authenticate to view search results, for example:

$ldapsearch --port 1389 --baseDN dc=example,dc=com "(uid=bjensen)"$ ldapsearch  \
--bindDN uid=bjensen,ou=people,dc=example,dc=com \
--port 1389 \
--baseDN dc=example,dc=com \
"(uid=bjensen)" cn uid
dn: uid=bjensen,ou=People,dc=example,dc=com
cn: Barbara Jensen
cn: Babs Jensen
uid: bjensen


An example of the captured command is the shell script, captured-global-aci-edits.sh.

To reject anonymous access except bind and StartTLS requests, set reject-unauthenticated-requests:true:

$dsconfig \ set-global-configuration-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --trustAll \ --no-prompt \ --set reject-unauthenticated-requests:true  Once you set the property, anonymous clients trying to search, for example, get an Unwilling to Perform response from OpenDJ directory server: $ ldapsearch --port 1389 --baseDN dc=example,dc=com "(uid=bjensen)"
SEARCH operation failed
Result Code:  53 (Unwilling to Perform)
Additional Information:  Rejecting the requested operation
because the connection has not been authenticated


In both cases, notice that the changes apply to a single OpenDJ directory server configuration, and so are not replicated to other servers. You must apply the changes separately to each replicated server.

Example 6.3. ACI: Full Access for Administrators

The following ACI gives a group of Directory Administrators full access. Some administrative operations will also require privileges not shown in this example:

aci: (target="ldap:///dc=example,dc=com") (targetattr =
"* || +")(version 3.0;acl "Admins can run amok"; allow(
all, proxy, import, export) groupdn =


targetattr = "* || +" permits access to all user attributes and all operational attributes. allow(all, proxy, import, export) permits all user operations, proxy authorization, and modify DN operations.

By default, the right to change one's own password is set in a global ACI. This ACI reproduces the same effect:

aci: (target ="ldap:///ou=People,dc=example,dc=com")(targetattr =
"authPassword || userPassword")(version 3.0;acl "Allow users to change pass
words"; allow (write)(userdn = "ldap:///self");)


Example 6.5. ACI: Manage Your Group Membership

For some static groups, such as carpoolers and social club members, you might choose to let users manage their own memberships. The following ACI lets members of self-service groups manage their own membership:

aci: (target ="ldap:///ou=Self Service,ou=Groups,dc=example,dc=com")(
targetattr = "member")(version 3.0;acl "Self registration"; allow(selfwrite)(
userdn = "ldap:///uid=*,ou=People,dc=example,dc=com");)


Example 6.6. ACI: Manage Self-Service Groups

This ACI lets users create and delete self-managed groups:

aci: (target ="ldap:///ou=Self Service,ou=Groups,dc=example,dc=com")(
acl "All can create self service groups"; allow (add)(userdn= "
ldap:///uid=*,ou=People,dc=example,dc=com");)
aci: (target ="ldap:///ou=Self Service,ou=Groups,dc=example,dc=com")(version 3
.0; acl "Owner can delete self service groups"; allow (delete)(userattr= "
owner#USERDN");)


Example 6.7. ACI: Permit Cleartext Access Over Loopback Only

This ACI uses IP address and Security Strength Factor subjects:

aci: (target = "ldap:///dc=example,dc=com")(targetattr =
"*")(version 3.0;acl "Use loopback only for LDAP in the clear"; deny (all)(
ip != "127.0.0.1" and ssf <= "1");)


When you use TLS but have not configured a cipher, ssf is one. Packets are checksummed for integrity checking, but all content is sent in cleartext.

6.5. Viewing Effective Rights

Once you set up a number of ACIs, you might find it difficult to understand by inspection what rights a user actually has to a given entry. The Get Effective Rights control can help.

Note

The control OID, 1.3.6.1.4.1.42.2.27.9.5.2, is not allowed by the default global ACIs.

In this example, Babs Jensen is the owner of a small group of people who are willing to carpool:

$ldapsearch \ --port 1389 \ --bindDN "uid=bjensen,ou=people,dc=example,dc=com" \ --bindPassword hifalutin \ --baseDN "ou=Self Service,ou=Groups,dc=example,dc=com" \ "cn=*" dn: cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com objectClass: groupOfNames objectClass: top member: uid=bjensen,ou=People,dc=example,dc=com description: People who are willing to carpool owner: uid=bjensen,ou=People,dc=example,dc=com cn: Carpoolers  Performing the same search with the get effective rights control, and asking for the aclRights attribute, shows what rights Babs has on the entry: $ ldapsearch \
--control effectiverights \
--port 1389 \
--bindDN "uid=bjensen,ou=people,dc=example,dc=com" \
--baseDN "ou=Self Service,ou=Groups,dc=example,dc=com" \
"cn=*" \
aclRights
dn: cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com


When you request the aclRightsInfo attribute, the server responds with information about the ACIs applied:

$ldapsearch \ --control effectiverights \ --port 1389 \ --bindDN "uid=bjensen,ou=people,dc=example,dc=com" \ --bindPassword hifalutin \ --baseDN "ou=Self Service,ou=Groups,dc=example,dc=com" \ "cn=*" \ aclRights \ aclRightsInfo dn: cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com aclRightsInfo;logs;entryLevel;read: acl_summary(main): access allowed(read) on e ntry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, objectClas s) to (uid=bjensen,ou=People,dc=example,dc=com) (not proxied) ( reason: evaluat ed allow , deciding_aci: Anonymous read-search access) aclRightsInfo;logs;entryLevel;write: acl_summary(main): access not allowed(write ) on entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NULL ) to (uid=bjensen,ou=People,dc=example,dc=com) (not proxied) ( reason: no acis matched the subject ) aclRightsInfo;logs;entryLevel;add: acl_summary(main): access not allowed(add) on entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NULL) to (uid=bjensen,ou=People,dc=example,dc=com) (not proxied) ( reason: no acis matc hed the subject ) aclRightsInfo;logs;entryLevel;delete: acl_summary(main): access allowed(delete) on entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NULL) to (uid=bjensen,ou=People,dc=example,dc=com) (not proxied) ( reason: evaluated allow , deciding_aci: Owner can delete self service groups) aclRights;entryLevel: add:0,delete:1,read:1,write:0,proxy:0 aclRightsInfo;logs;entryLevel;proxy: acl_summary(main): access not allowed(proxy ) on entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NULL ) to (uid=bjensen,ou=People,dc=example,dc=com) (not proxied) ( reason: no acis matched the subject )  You can also request the effective rights for another user by using the --getEffectiveRightsAuthzid (short form: -g) option, which takes the authorization identity of the other user as an argument. The following example shows Directory Manager checking anonymous user rights to the same entry. Notice that the authorization identity for an anonymous user is expressed as dn:: $ ldapsearch \
--getEffectiveRightsAuthzid "dn:" \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN "ou=Self Service,ou=groups,dc=example,dc=com" \
"cn=*" aclRightsInfo
dn: cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com
ntry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, objectClas
s) to (anonymous) (not proxied) ( reason: evaluated allow , deciding_aci: Anony
aclRightsInfo;logs;entryLevel;write: acl_summary(main): access not allowed(write
) on entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NULL
) to (anonymous) (not proxied) ( reason: no acis matched the subject )
entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NULL) to
(anonymous) (not proxied) ( reason: no acis matched the subject )
aclRightsInfo;logs;entryLevel;delete: acl_summary(main): access not allowed(dele
te) on entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NU
LL) to (anonymous) (not proxied) ( reason: no acis matched the subject )
aclRightsInfo;logs;entryLevel;proxy: acl_summary(main): access not allowed(proxy
) on entry/attr(cn=Carpoolers,ou=Self Service,ou=Groups,dc=example,dc=com, NULL
) to (anonymous) (not proxied) ( reason: no acis matched the subject )


When you need to check access to an attribute that might not yet exist on the entry, use the --getEffectiveRightsAttribute (short form: -e) option, which takes an attribute list as an argument. The following example shows Directory Manager checking anonymous user access to the description attribute for the Self Service groups organizational unit entry. The description attribute is not yet in the entry:

$ldapsearch \ --port 1389 \ --baseDN "ou=Self Service,ou=groups,dc=example,dc=com" \ "ou=Self Service" description dn: ou=Self Service,ou=Groups,dc=example,dc=com$ ldapsearch \
--getEffectiveRightsAuthzid "dn:" \
--getEffectiveRightsAttribute description \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN "ou=Self Service,ou=groups,dc=example,dc=com" \
"ou=Self Service" aclRights
dn: ou=Self Service,ou=Groups,dc=example,dc=com


[11] This does not apply to the root DN user, cn=Directory Manager, who has the bypass-acl privilege.

Chapter 7. Indexing Attribute Values

This chapter covers OpenDJ indexing features used to speed up searches, and to limit the impact of searches on directory server resources. In this chapter you will learn to:

• Define indexes and explain why they are useful

• Determine what to index and what types of indexes to use

• Configure, build, and rebuild indexes

• Check that indexes are valid

A basic, standard directory feature is the ability to respond quickly to searches.

An LDAP search specifies the following information that directly affects how long the directory might take to respond:

• The base DN for the search.

The more specific the base DN, the less information to check during the search. For example, a request with base DN dc=example,dc=com potentially involves checking many more entries than a request with base DN uid=bjensen,ou=people,dc=example,dc=com.

• The scope of the search.

A subtree or one-level scope targets many entries, whereas a base search is limited to one entry.

• The search filter to match.

A search filter, such as (cn=Babs Jensen), asserts that an attribute on the entry to search for, in this case cn, corresponds to some value. In this case, the attribute must have a value that equals Babs Jensen, ignoring case sensitivity.

It would generally be a waste of resources to have the directory server check all entries to see whether they have a CN of Babs Jensen. Instead, directory servers maintain indexes to expedite checking whether a search filter matches.

Directories like OpenDJ directory server even go so far as to disallow searches that cannot be handled expediently using indexes. Maintaining appropriate indexes is a key aspect of directory administration.

The role of an index is to answer the question, "Which entries have an attribute with this corresponding value?" Each index is therefore specific to an attribute. Each index is also specific to the comparison implied in the search filter. For example, OpenDJ directory server maintains distinct indexes for exact (equality) matching and for substring matching. The types of indexes are explained in Section 7.3, "Index Types and Their Functions". Furthermore, indexes are configured in specific directory backends.

An OpenDJ index is implemented as a tree of key-value pairs. The key is a form of the value to match, such as babs jensen. The value is a list of IDs for entries that match the key. Figure 7.1, "An OpenDJ Equality Index" shows an equality (case ignore exact match) index with five keys from a total of four entries. If the data set were large, there could be more than one entry ID per key.

This is how OpenDJ directory server uses indexes. When the search filter is (cn=Babs Jensen), OpenDJ directory server retrieves the IDs for entries with a CN matching Babs Jensen from the equality index of the CN attribute. (For a complex filter, OpenDJ directory server might optimize the search by changing the order in which it uses the indexes.) A successful result is zero or more entry IDs. These are the candidate result entries.

For each candidate, OpenDJ directory server retrieves the entry by ID from a special system index called id2entry, which, as its name suggests, returns an entry for an entry ID. If there is a match, and the client application has the right to access to the data, OpenDJ directory server returns the search result. It continues this process until no candidates are left.

If there are no indexes that correspond to a search request, then OpenDJ directory server must potentially check for a match against every entry in the scope of the search. Evaluating every entry for a match is referred to as an unindexed search. An unindexed search is an expensive operation, particularly for large directories. For this reason, OpenDJ directory server refuses unindexed searches unless the user making the request has specific permission to make such requests. Permission to perform an unindexed search is granted with the unindexed-search privilege. This privilege is reserved for the directory root user by default, and should not be granted lightly.

7.2. What To Index

OpenDJ search performance depends on indexes as described in Section 7.1, "About Indexes".

OpenDJ directory server maintains generally useful indexes for data imported into the default userRoot backend. When you create a new backend, OpenDJ directory server only maintains the necessary system indexes unless you configure additional indexes. For details, see Section 7.6, "Default Indexes".

The default settings are fine for evaluating OpenDJ directory server, and they work well with sample data. The default settings might not, however, fit your directory data and the searches performed on your directory service.

You can view and edit what is indexed through OpenDJ control panel, Indexes > Manage Indexes. Alternatively, you can manage indexes using the command-line tools demonstrated in Section 7.4, "Configuring and Rebuilding Indexes".

7.2.1. Determining Which Indexes Are Needed

Index maintenance has its costs. Every time an indexed attribute is updated, OpenDJ directory server must update each affected index to reflect the change, which is wasteful if the index is hardly used. Indexes, especially substring indexes, can take up more memory and disk space than the corresponding data.

Aim to maintain only those indexes that speed up appropriate searches, and that allow OpenDJ directory server to operate properly. The latter indexes include non-configurable internal indexes, and generally are handled by OpenDJ directory server without intervention. The former, indexes for appropriate searches, require thought and investigation. Whether a search is appropriate depends on the circumstances.

Begin by reviewing the attributes of your directory data. Which attributes would you expect to see in a search filter? If an attribute is going to show up frequently in reasonable search filters, then it ought to be indexed.

Compare your guesses with what you see actually happening in the directory. One way of doing this is to review the access log for search results that are marked unindexed:

$grep -B 1 unindexed /path/to/opendj/logs/access SEARCH REQ conn=5 op=0 msgID=1 base="ou=people,dc=example,dc=com" scope=sub filter="(&(mail=*.net)(objectclass=person))" attrs="ALL" SEARCH RES conn=5 op=0 msgID=1 result=50 message="You do not have sufficient privileges to perform an unindexed search" nentries=0 unindexed etime=9 -- SEARCH REQ conn=9 op=0 msgID=1 base="ou=people,dc=example,dc=com" scope=sub filter="(&(employeenumber=86182)(mail=*@maildomain.net))" attrs="ALL" SEARCH RES conn=9 op=0 msgID=1 result=50 message="You do not have sufficient privileges to perform an unindexed search" nentries=0 unindexed etime=3 -- SEARCH REQ conn=11 op=0 msgID=1 base="ou=people,dc=example,dc=com" scope=sub filter="(objectclass=person)" attrs="ALL" SEARCH RES conn=11 op=0 msgID=1 result=50 message="You do not have sufficient privileges to perform an unindexed search" nentries=0 unindexed etime=3  Understand the search filter that led to each unindexed search. If the filter is appropriate and frequently used, add an index to facilitate the search. You can either consume the access logs to determine how often a search filter is used, or monitor what is happening in the directory by using the index analysis feature. OpenDJ directory server provides this feature to collect information about filters in search requests. You can activate the index analysis mechanism using the dsconfig set-backend-prop command: $ dsconfig \
set-backend-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--backend-name userRoot \
--set index-filter-analyzer-enabled:true \
--no-prompt \
--trustAll


The command causes OpenDJ directory server to analyze filters used, and to keep the results in memory, so that you can read them through the cn=monitor interface:

$ldapsearch \ --port 1389 \ --baseDN "cn=userRoot Storage,cn=monitor" \ --bindDN "cn=Directory Manager" \ --bindPassword password \ "(objectclass=*)" \ filter-use dn: cn=userRoot Storage,cn=monitor filter-use: (objectClass=ldapSubentry) hits:1 maxmatches:0 message: filter-use: (aci=*) hits:1 maxmatches:0 message: filter-use: (employeenumber=86182) hits:6 maxmatches:-1 message:equality index t ype is disabled for the employeeNumber attribute filter-use: (mail=*@maildomain.net) hits:6 maxmatches:-1 message:The filter valu e exceeded the index entry limit for the /dc=com,dc=example/mail.caseIgnoreIA5S ubstringsMatch:6 index... filter-use: (objectClass=subentry) hits:1 maxmatches:0 message: filter-use: (cn=aa*) hits:2 maxmatches:50 message: filter-use: (objectClass=ds-virtual-static-group) hits:1 maxmatches:0 message: filter-use: (objectClass=groupOfNames) hits:1 maxmatches:0 message: filter-use: (uid=user.86182) hits:2 maxmatches:1 message: filter-use: (mail=*.net) hits:1 maxmatches:-1 message:The filter value exceeded the index entry limit for the /dc=com,dc=example/mail.caseIgnoreIA5SubstringsMa tch:6 index filter-use: (objectclass=person) hits:3 maxmatches:-1 message:The filter value e xceeded the index entry limit for the /dc=com,dc=example/objectClass.objectIden tifierMatch index filter-use: (objectClass=groupOfEntries) hits:1 maxmatches:0 message: filter-use: (objectClass=groupOfUniqueNames) hits:1 maxmatches:0 message: filter-use: (objectClass=groupOfURLs) hits:1 maxmatches:0 message:  The filter-use values are the filter, the hits (number of times the filter was used), the maxmatches (number of matches found), and an optional message. Notice in the example output above that you see filters for internal use, such as (aci=*). You also see filters for searches that are not indexed. One appropriate search filter that led to an unindexed search, (employeenumber=86182), had no matches because, "equality index type is disabled for the employeeNumber attribute." Some client application is trying to find specific users by employee number, but no index exists for that purpose. If this appears regularly as a frequent search, add an employee number index as described in Section 7.4.1, "Configuring a Standard Index". One inappropriate search filter that led to an unindexed search, (mail=*.net), had no matches because, "The filter value exceeded the index entry limit for the /dc=com,dc=example/mail.caseIgnoreIA5SubstringsMatch:6 index." It appears that some client application is trying to list all entries with an email address ending in .net. There are so many such entries that although an index exists for the mail attribute, OpenDJ directory server has given up maintaining the list of entries with email addresses ending in .net. In a large directory, there might be many thousands of matching entries. If you take action to allow this expensive search, the requests could consume a large share of directory resources, or even cause a denial of service to other requests. To avoid impacting OpenDJ directory server performance, turn off index analysis after you collect the information you need. You turn off index analysis with the dsconfig set-backend-prop command: $ dsconfig \
set-backend-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--backend-name userRoot \
--set index-filter-analyzer-enabled:false \
--no-prompt \
--trustAll


Directory users might complain to you that their searches are refused because they are unindexed. Ask for the result code, additional information, and search filter. OpenDJ directory server responds to an LDAP client application that attempts an unindexed search with a result code of 50 and additional information about an unindexed search. The following example attempts, anonymously, to get the entries for all users whose email address ends in .net:

$ldapsearch \ --port 1389 \ --baseDN ou=people,dc=example,dc=com \ "(&(mail=*.net)(objectclass=person))" SEARCH operation failed Result Code: 50 (Insufficient Access Rights) Additional Information: You do not have sufficient privileges to perform an unindexed search  Rather than adjusting settings to permit the search, try to understand why the user wants to perform an unindexed search. Perhaps they are unintentionally requesting an unindexed search. If so, you can help them find a less expensive search, by using an approach that limits the number of candidate result entries. For example, if a GUI application lets a user browse a group of entries, the application could use a browsing index to retrieve a block of entries for each screen, rather than retrieving all the entries at once. Perhaps they do have a legitimate reason to get the full list of all entries in one operation, such as regularly rebuilding some database that depends on the directory. If so, their application can perform the search as a user who has the unindexed-search privilege. To assign the unindexed-search privilege, see Section 6.3, "Configuring Privileges". 7.3. Index Types and Their Functions OpenDJ directory server supports multiple index types, each corresponding to a different type of search. This section describes the index types and what they are used for. View what is indexed through OpenDJ control panel, Indexes > Manage Indexes. Alternatively, use the backendstat list-indexes command. For details about a particular index, you can use the backendstat dump-index command. 7.3.1. Presence Index A presence index is used to match an attribute that is present on the entry, regardless of the value. The aci attribute is indexed for presence by default to allow quick retrieval of entries with ACIs: $ ldapsearch \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com \
"(aci=*)" -
dn: dc=example,dc=com

dn: ou=People,dc=example,dc=com


Due to its implementation, a presence index takes up less space than other indexes. In a presence index, there is just one key with a list of IDs.

As described in Section 7.1, "About Indexes", an OpenDJ directory server index is implemented as a tree of key-value pairs. The following command examines the ACI presence index for Example.ldif data:

$backendstat \ dump-index \ --backendID userRoot \ --baseDN dc=example,dc=com \ --indexName aci.presence Key (len 1): PRESENCE Value (len 5): [COUNT:2] 100003 100011 Total Records: 1 Total / Average Key Size: 1 bytes / 1 bytes Total / Average Data Size: 5 bytes / 5 bytes  In this case, there are two entries that have ACI attributes. Their IDs are 100003 and 100011. 7.3.2. Equality Index An equality index is used to match values that correspond exactly (though generally without case sensitivity) to the value provided in the search filter. An equality index requires clients to match values without wildcards or misspellings: $ ldapsearch --port 1389 --baseDN dc=example,dc=com "(uid=bjensen)" mail
dn: uid=bjensen,ou=People,dc=example,dc=com
mail: bjensen@example.com


An equality index has one list of entry IDs for each attribute value. Depending on the backend implementation, the keys in a case-insensitive index might not be strings. For example, a key of 6A656E73656E could represent jensen.

As described in Section 7.1, "About Indexes", an OpenDJ directory server index is implemented as a tree of key-value pairs. The following command examines the SN equality index for Example.ldif data:

$backendstat \ dump-index \ --backendID userRoot \ --baseDN dc=example,dc=com \ --indexName sn.caseIgnoreMatch ... Key (len 6): jensen Value (len 12): [COUNT:9] 100018 100031 100032 100066 100079 100094 100133 100134 100150 ... Total Records: 87 Total / Average Key Size: 528 bytes / 6 bytes Total / Average Data Size: 414 bytes / 4 bytes  In this case, there are nine entries that have an SN of Jensen. As long as the keys of the equality index are not encrypted, OpenDJ directory server can reuse an equality index for some other searches, such as ordering and initial substring searches. 7.3.3. Approximate Index An approximate index is used to match values that "sound like" those provided in the filter. An approximate index on cn lets client applications find people even when they misspell names, as in the following example: $ ldapsearch --port 1389 --baseDN dc=example,dc=com "(cn~=Babs Jansen)" cn
dn: uid=bjensen,ou=People,dc=example,dc=com
cn: Barbara Jensen
cn: Babs Jensen


An approximate index squashes attribute values into a normalized form.

As described in Section 7.1, "About Indexes", an OpenDJ directory server index is implemented as a tree of key-value pairs. The following command examines an SN approximate index for Example.ldif data:

$backendstat \ dump-index \ --backendID userRoot \ --baseDN dc=example,dc=com \ --indexName sn.ds-mr-double-metaphone-approx ... Key (len 4): JNSN Value (len 13): [COUNT:10] 100018 100031 100032 100059 100066 100079 100094 100133 100134 100150 ... Total Records: 84 Total / Average Key Size: 276 bytes / 3 bytes Total / Average Data Size: 405 bytes / 4 bytes  In this case, there are ten entries that have an SN that sounds like Jensen. 7.3.4. Substring Index A substring index is used to match values that are specified with wildcards in the filter. Substring indexes can be expensive to maintain, especially for large attribute values: $ ldapsearch --port 1389 --baseDN dc=example,dc=com "(cn=Barb*)" cn
dn: uid=bfrancis,ou=People,dc=example,dc=com
cn: Barbara Francis

dn: uid=bhal2,ou=People,dc=example,dc=com
cn: Barbara Hall

dn: uid=bjablons,ou=People,dc=example,dc=com
cn: Barbara Jablonski

dn: uid=bjensen,ou=People,dc=example,dc=com
cn: Barbara Jensen
cn: Babs Jensen



In a substring index, there are enough keys to allow OpenDJ directory server to match any substring in the attribute values. Each key is associated with a list of IDs. The default maximum size of a substring key is 6 bytes.

As described in Section 7.1, "About Indexes", an OpenDJ directory server index is implemented as a tree of key-value pairs. The following command examines an SN substring index for Example.ldif data:

$backendstat \ dump-index \ --backendID userRoot \ --baseDN dc=example,dc=com \ --indexName sn.caseIgnoreSubstringsMatch:6 ... Key (len 1): e Value (len 25): [COUNT:22] 100024 100027 100035 100046 100048 100052 100058 100070 100073 100074 100075 100080 100091 100093 100100 100115 100117 100123 100142 100148 100152 100155 ... Key (len 2): en Value (len 15): [COUNT:12] 100018 100031 100032 100037 100066 100079 100094 100122 100133 100134 100150 100156 ... Key (len 3): ens Value (len 4): [COUNT:1] 100147 Key (len 5): ensen Value (len 12): [COUNT:9] 100018 100031 100032 100066 100079 100094 100133 100134 100150 ... Key (len 6): jensen Value (len 12): [COUNT:9] 100018 100031 100032 100066 100079 100094 100133 100134 100150 ... Key (len 1): n Value (len 35): [COUNT:32] 100013 100014 100018 100019 100020 100022 100031 100032 100037 100049 100054 100059 100066 100071 100077 100079 100088 100094 100097 100102 100106 100113 100116 100122 100124 100133 100134 100143 100144 100150 100153 100156 ... Key (len 2): ns Value (len 4): [COUNT:1] 100147 Key (len 4): nsen Value (len 12): [COUNT:9] 100018 100031 100032 100066 100079 100094 100133 100134 100150 ... Key (len 1): s Value (len 15): [COUNT:12] 100012 100026 100047 100064 100095 100098 100108 100131 100135 100147 100149 100154 ... Key (len 2): se Value (len 9): [COUNT:6] 100052 100058 100075 100117 100123 100148 Key (len 3): sen Value (len 12): [COUNT:9] 100018 100031 100032 100066 100079 100094 100133 100134 100150 ... Total Records: 391 Total / Average Key Size: 1653 bytes / 4 bytes Total / Average Data Size: 2095 bytes / 5 bytes  In this case, the SN value Jensen shares substrings with many other entries. Given the size of the lists and number of keys in a substring index, it is much more expensive to maintain than other indexes. This is particularly true for longer attribute values. 7.3.5. Ordering Index An ordering index is used to match values for a filter that specifies a range. For example, the ds-sync-hist attribute, which is for OpenDJ directory server's internal use, has an ordering index by default. Searches on that attribute often seek entries with changes more recent than the last time a search was performed. The following example shows a search that specifies a range on the SN attribute value: $ ldapsearch --port 1389 --baseDN dc=example,dc=com  "(sn>=winter)" sn
dn: uid=aworrell,ou=People,dc=example,dc=com
sn: Worrell

dn: uid=kwinters,ou=People,dc=example,dc=com
sn: Winters

dn: uid=pworrell,ou=People,dc=example,dc=com
sn: Worrell


In this case, OpenDJ directory server only requires an ordering index if it cannot reuse the (ordered) equality index instead. For example, if the equality index is encrypted, the ordering index would need to be maintained separately.

7.3.6. Virtual List View (Browsing) Index

A virtual list view (VLV) or browsing index is designed to help the server respond to client applications that need virtual list view results, for example, to browse through a long list in a GUI. They also help the server respond to clients that request server-side sorting of the search results.

VLV indexes correspond to particular searches. Configure your VLV indexes using the control panel, and copy the command-line equivalent from the Details pane for the operation, if necessary.

7.3.7. Extensible Matching Rule Index

In some cases you need an index for a matching rule other than those described above. For example, OpenDJ supports generalized time-based matching so that applications can search for all times later than, or earlier than a specified time.

7.4. Configuring and Rebuilding Indexes

You modify index configurations by using the dsconfig command. The subcommands to use depend on the backend type, as shown in the examples that follow. The configuration changes then take effect after you rebuild the index according to the new configuration, using the rebuild-index command. The dsconfig --help-database command lists subcommands for creating, reading, updating, and deleting index configuration.

Tip

Indexes are per directory backend rather than per suffix. To maintain separate indexes for different suffixes on the same directory server, put the suffixes in different backends.

This section includes the following procedures:

7.4.1. Configuring a Standard Index

You can configure standard indexes from the control panel, and also on the command-line using the dsconfig command. After you finish configuring the index, you must rebuild the index for the changes to take effect.

To prevent indexed values from appearing in cleartext in a backend, you can enable confidentiality by backend index. For details, see Section 4.5, "Encrypting Directory Data".

Example 7.1. Create a New Index

The following example creates a new equality index for the cn (common name) attribute in a backend of type pdb named myData:

$dsconfig \ create-backend-index \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name myData \ --index-name cn \ --set index-type:equality \ --trustAll \ --no-prompt  Example 7.2. Configure an Approximate Index The following example configures an approximate index for the cn (common name) attribute in a backend of type pdb named myData: $ dsconfig \
set-backend-index-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--backend-name myData \
--index-name cn \
--set index-type:approximate \
--trustAll \
--no-prompt


Approximate indexes depend on the Double Metaphone matching rule, described in Example 7.3, "Configure an Extensible Match Index".

Example 7.3. Configure an Extensible Match Index

OpenDJ directory server supports matching rules defined in LDAP RFCs. It also defines OpenDJ-specific extensible matching rules.

The following are OpenDJ-specific extensible matching rules:

Name: ds-mr-double-metaphone-approx, OID: 1.3.6.1.4.1.26027.1.4.1

Double Metaphone Approximate Match described at http://aspell.net/metaphone/. The OpenDJ implementation always produces a single value rather than one or possibly two values.

Configure approximate indexes as described in Example 7.2, "Configure an Approximate Index".

For an example using this matching rule, see Example 2.5, "Search: Finding an Approximate Match" in the OpenDJ Directory Server Developer's Guide.

Name: ds-mr-user-password-exact, OID: 1.3.6.1.4.1.26027.1.4.2

User password exact matching rule used to compare encoded bytes of two hashed password values for exact equality.

Name: ds-mr-user-password-equality, OID: 1.3.6.1.4.1.26027.1.4.3

User password matching rule implemented as the user password exact matching rule.

Name: partialDateAndTimeMatchingRule, OID: 1.3.6.1.4.1.26027.1.4.7

Partial date and time matching rule for matching parts of dates in time-based searches.

For an example using this matching rule, see Example 2.7, "Search: Listing Active Accounts" in the OpenDJ Directory Server Developer's Guide.

Name: relativeTimeOrderingMatch.gt, OID: 1.3.6.1.4.1.26027.1.4.5

Greater-than relative time matching rule for time-based searches.

For an example that configures an index with this matching rule, see Example 2.7, "Search: Listing Active Accounts" in the OpenDJ Directory Server Developer's Guide.

Name: relativeTimeOrderingMatch.lt, OID: 1.3.6.1.4.1.26027.1.4.6

Less-than relative time matching rule for time-based searches.

For an example using this matching rule, see Example 2.7, "Search: Listing Active Accounts" in the OpenDJ Directory Server Developer's Guide.

The OpenDJ control panel New Index window does not help you set up extensible matching rule indexes. Use the dsconfig command instead.

The following example configures an extensible matching rule index for "later than" and "earlier than" generalized time matching on a lastLoginTime attribute in a backend of type pdb named myData:

$dsconfig \ create-backend-index \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name myData \ --set index-type:extensible \ --set index-extensible-matching-rule:1.3.6.1.4.1.26027.1.4.5 \ --set index-extensible-matching-rule:1.3.6.1.4.1.26027.1.4.6 \ --index-name lastLoginTime \ --trustAll \ --no-prompt  7.4.2. Configuring a Virtual List View Index In the OpenDJ control panel, select Manage Indexes > New VLV Index, and then set up your VLV index using the New VLV Index window as shown in Figure 7.2, "New VLV Index Window". After you finish configuring your index and click OK, the Control Panel prompts you to make the additional changes necessary to complete the VLV index configuration, and then to build the index. You can also create the equivalent index configuration by using the dsconfig command. The following example shows how to create the VLV index for a backend of type pdb named myData: $ dsconfig \
create-backend-vlv-index \
--port 4444 \
--hostname opendj.example.com \
--bindDn "cn=Directory Manager" \
--backend-name myData \
--index-name people-by-last-name \
--set base-dn:ou=People,dc=example,dc=com \
--set filter:"(|(givenName=*)(sn=*))" \
--set scope:single-level \
--set sort-order:"+sn +givenName" \
--trustAll \
--no-prompt


Note

When referring to a VLV index after creation, you must add vlv. as a prefix. In other words, if you named the VLV index people-by-last-name, you refer to it as vlv.people-by-last-name when rebuilding indexes, changing index properties such as the index entry limit, or verifying indexes.

7.4.3. Rebuilding Indexes

After you change an index configuration, or when you find that an index is corrupt, you can rebuild the index. When you rebuild indexes, you specify the base DN of the data to index, and either the list of indexes to rebuild or --rebuildAll. You can rebuild indexes while the server is offline, or while the server is online. If you rebuild the index while the server is online, then you must schedule the rebuild process as a task.

This section includes the following examples:

Example 7.4. Rebuild Index

The following example rebuilds the cn index immediately with the server online:

$rebuild-index \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN dc=example,dc=com \ --index cn \ --start 0 \ --trustAll Rebuild Index task 20150219181540575 scheduled to start Feb 19, 2015 6:15:40  Example 7.5. Rebuild Degraded Indexes The following example rebuilds degraded indexes immediately with the server online: $ rebuild-index \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com \
...
...message="Due to changes in the configuration,
index dc=com,dc=example_description is currently operating in a degraded state
and must be rebuilt before it can be used"
...message="Rebuild of all degraded indexes started
with 177 total entries to process"
..."Rebuild complete. Processed 177 entries in 0 seconds
(average rate 3160.7/sec)"
...
Rebuild Index task 20151031164835613 has been successfully completed


Example 7.6. Clear New, Unused, Degraded Indexes

When you add a new attribute as described in Section 14.2, "Updating Directory Schema", and then create indexes for the new attribute, the new indexes appear as degraded, even though the attribute has not yet been used, and so indexes are sure to be empty, rather than degraded.

In this special case, you can safely use the rebuild-index --clearDegradedState command to avoid having to scan the entire directory backend before rebuilding the new, unused index. In this example, an index has just been created for newUnusedAttribute.

Before using the rebuild-index command, test the index status to make sure that the index has not yet been used: by using the backendstat command, described in backendstat(1) in the OpenDJ Reference.

OpenDJ directory server must be stopped before you use the backendstat command:

$stop-ds  The third column of the output is the Index Valid column, which is false before the rebuild, true after: $ backendstat show-index-status --backendID userRoot --baseDN dc=example,dc=com \
| grep newunusedattribute
newunusedattribute.presence                       ...                false ...
newunusedattribute.caseIgnoreMatch                ...                false ...
newunusedattribute.caseIgnoreSubstringsMatch:6    ...                false ...


Update the index information to fix the value of the unused index:

$rebuild-index --baseDN dc=example,dc=com --clearDegradedState \ --index newUnusedAttribute  Check that the Index Valid column for the index status is now set to true: $ backendstat show-index-status --backendID userRoot --baseDN dc=example,dc=com \
| grep newunusedattribute
newunusedattribute.presence                       ...                true ...
newunusedattribute.caseIgnoreMatch                ...                true ...
newunusedattribute.caseIgnoreSubstringsMatch:6    ...                true ...


Start OpenDJ directory server:

$start-ds  If the newly indexed attribute has already been used, rebuild the index instead of clearing the degraded state. 7.4.4. Understanding Index Entry Limits As described in Section 7.1, "About Indexes", an OpenDJ directory server index is implemented as a tree of key-value pairs. The key is what the search is trying to match. The value is a list of entry IDs. As the number of entries in the directory grows, the list of entry IDs for some keys can become very large. For example, every entry in the directory has the value top for the objectClass attribute. If the directory maintains a substring index for mail, the number of entries ending in .com could be huge. OpenDJ directory server therefore defines an index entry limit. When the number of entry IDs for a key exceeds the limit, OpenDJ directory server stops maintaining a list of IDs for that key. The limit effectively makes a search using that key unindexed. Searches using other keys in the same index are not affected. Figure 7.3, "Index Entry Limit Exceeded For a Single Key" shows a fragment from a substring index for the mail attribute. The number of email addresses ending in .com has exceeded the index entry limit. For the other substring keys, the entry ID lists are still maintained, but to save space the entry IDs are not shown in the diagram. Ideally, the limit is set at the point where it becomes more expensive to maintain the entry ID list for a key and to perform an indexed search than to perform an unindexed search. In practice, the limit is a trade off, with a default index entry limit value of 4000. The following steps show how to get information about indexes where the index entry limit is exceeded for some keys. In this case, the directory server holds 10,000 user entries. The settings for this directory server are reasonable. Use the backendstat show-index-status command, described in backendstat(1) in the OpenDJ Reference. 1. Stop OpenDJ directory server before you use the backendstat command: $ stop-ds

2. Non-zero values in the Over Entry Limit column of the output table indicate the number of keys for which the limit has been reached. The keys that are over the limit are then listed below the table:

$backendstat show-index-status --backendID userRoot --baseDN dc=example,dc=com Index Name ... Index Valid Record Count Over Entry Limit 95% 90% 85% --------------------------------------...----------------------------------------------------------- uniqueMember.uniqueMemberMatch ... true 0 0 0 0 0 mail.caseIgnoreIA5Match ... true 10000 0 0 0 0 mail.caseIgnoreIA5SubstringsMatch:6 ... true 31235 15 0 0 0 telephoneNumber.... ... true 73235 0 0 0 0 telephoneNumber.telephoneNumberMatch ... true 10000 0 0 0 0 aci.presence ... true 0 0 0 0 0 ds-sync-hist.... ... true 0 0 0 0 0 cn.caseIgnoreMatch ... true 10000 0 0 0 0 cn.caseIgnoreSubstringsMatch:6 ... true 86040 0 0 0 0 objectClass.objectIdentifierMatch ... true 6 4 0 0 0 entryUUID.uuidMatch ... true 10002 0 0 0 0 uid.caseIgnoreMatch ... true 10000 0 0 0 0 givenName.caseIgnoreMatch ... true 8605 0 0 0 0 givenName.caseIgnoreSubstringsMatch:6 ... true 19629 0 0 0 0 member.distinguishedNameMatch ... true 0 0 0 0 0 sn.caseIgnoreMatch ... true 10000 0 0 0 0 sn.caseIgnoreSubstringsMatch:6 ... true 32217 0 0 0 0 ds-sync-conflict.... ... true 0 0 0 0 0 Total: 18 Index: /dc=com,dc=example/objectClass.objectIdentifierMatch Over index-entry-limit keys: [2.5.6.0] [2.5.6.6] [2.5.6.7] [inetorgperson] Index: /dc=com,dc=example/mail.caseIgnoreIA5SubstringsMatch:6 Over index-entry-limit keys: [.net] [@maild] [aildom] [ain.ne] [domain] [et] [ildoma] [in.net] [ldomai] [maildo] [main.n] [n.net] [net] [omain.] [t]  Every user entry has the object classes listed, and every user entry has an email address ending in @maildomain.net, so those values are not specific enough to be used in search filters. 3. Start OpenDJ directory server: $ start-ds

Example 7.7. Index Entry Limit Changes

In rare cases, the index entry limit might be too low for a certain key. This could manifest itself as a frequent, useful search becoming unindexed, with no reasonable way to narrow the search.

You can change the index entry limit on a per-index basis. Do not do this in production unless you can explain and show why the benefits outweigh the costs.

Important

Changing the index entry limit significantly can result in serious performance degradation. Be prepared to test performance thoroughly before you roll out an index entry limit change in production.

Consider a directory with more than 4000 groups in a backend. When the backend is brought online, OpenDJ directory server searches for the groups with a search filter of (|(objectClass=groupOfNames)(objectClass=groupOfEntries)(objectClass=groupOfUniqueNames)), which is an unindexed search due to the default index entry limit setting. The following example raises the index entry limit for the objectClass index to 10000, and then rebuilds the index for the configuration change to take effect. The steps are the same for any other index:

$dsconfig \ set-backend-index-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --index-name objectClass \ --set index-entry-limit:10000 \ --trustAll \ --no-prompt$ rebuild-index \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com \
--index objectClass \
--start 0
Rebuild Index task 20160729123736723 scheduled to start ...


It is also possible, but not recommended, to configure the global index-entry-limit for a backend. This changes the default for all indexes in the backend. Use the dsconfig set-backend-prop command as shown in the following example:

# Not recommended
$dsconfig \ set-backend-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --set index-entry-limit:10000 \ --trustAll \ --no-prompt  7.5. Verifying Indexes You can verify that indexes correspond to current directory data, and that indexes do not contain errors by using the verify-index command, described in verify-index(1) in the OpenDJ Reference. Example 7.8. Verify Index The following example verifies the cn (common name) index for completeness and for errors: $ verify-index \
--baseDN dc=example,dc=com \
--index cn \
--clean \
--countErrors
...msg=Checked 1316 records and found 0 error(s) in 0 seconds
(average rate 2506.7/sec)
...msg=Number of records referencing more than one entry: 315
...msg=Number of records that exceed the entry limit: 0
...msg=Average number of entries referenced is 1.58/record
...msg=Maximum number of entries referenced by any record is 32


Ignore the messages regarding lock tables and cleaner threads. The important information is whether any errors are found in the indexes.

7.6. Default Indexes

When you first install OpenDJ directory server and import your data from LDIF, the following indexes are configured.

Table 7.1. Default Indexes
IndexApprox.EqualityOrderingPresenceSubstringEntry Limit
aci---Yes-4000
cn-Yes--Yes4000
dn2idNon-configurable internal index
ds-sync-conflict-Yes---4000
ds-sync-hist--Yes--4000
entryUUID-Yes---4000
givenName-Yes--Yes4000
id2childrenNon-configurable internal index
id2subtreeNon-configurable internal index
mail-Yes--Yes4000
member-Yes---4000
objectClass-Yes---4000
sn-Yes--Yes4000
telephone­Number-Yes--Yes4000
uid-Yes---4000
unique­Member-Yes---4000

When you create a new backend using the dsconfig command, OpenDJ directory server creates the following indexes automatically:

 aci presence ds-sync-conflict equality ds-sync-hist ordering entryUUID equality objectClass equality

You can create additional indexes as described in Section 7.4, "Configuring and Rebuilding Indexes".

Chapter 8. Managing Data Replication

OpenDJ uses advanced data replication with automated conflict resolution to help ensure your directory services remain available during administrative operations that take an individual server offline, or in the event a server crashes or a network goes down. This chapter explains how to manage OpenDJ directory data replication. In this chapter you will learn to:

• Set up replication as part of initial installation using OpenDJ control panel, or at any time using command-line tools

• Understand how replication operates in order to configure it appropriately

• Enable, initialize, and stop data replication

• Configure standalone directory servers and replication servers, or break a server that plays both roles into two standalone servers

• Configure replication groups, read-only replicas, assured replication, subtree replication, and fractional replication for complex deployments

• Configure and use change notification to synchronize external applications with changes to directory data

• Recover from situations where a user error has been applied to all replicas

8.1. Replication Quick Setup

You can set up replication during installation by using the setup wizard, starting with the Topology Options screen:

• In the Topology Options screen for the first server you set up, select This server will be part of a replication topology.

If you also choose Configure as Secure, then replication traffic is protected by Transport Layer Security.

• In the Topology Options screen for subsequent servers, select There is already a server in the topology.

Provide the Host Name, Administration Connector Port number, global Admin User identifier, and Admin Password for the first server.

• When presented with the Create Global Administrator screen, provide a Global Administrator ID and Global Administrator Password.

The Global Administrator account exists on all servers in the replication topology. The account is stored under cn=admin data. It provides an account to administer replication with the same credentials on every server in the topology.

• In the Data Replication screen, select the user and application data base DN(s) to replicate.

OpenDJ directory server automatically replicates configuration data and directory schema.

Once replication is set up, it works for all the replicas. You can monitor replication status through OpenDJ control panel.

Before you take replication further than setting up replication in the setup wizard, read this section to learn more about how OpenDJ replication works.

8.2.1. Replication Defined

Replication is the process of copying updates between OpenDJ directory servers such that all servers converge on identical copies of directory data. Replication is designed to let convergence happen over time by default. [12] Letting convergence happen over time means that different replicas can be momentarily out of sync, but it also means that if you lose an individual server or even an entire data center, your directory service can keep on running, and then get back in sync when the servers are restarted or the network is repaired.

Replication is specific to the OpenDJ directory service. Replication uses a specific protocol that replays update operations quickly, storing enough historical information about the updates to resolve most conflicts automatically. For example, if two client applications separately update a user entry to change the phone number, replication can identify the latest change, and apply it across servers. The historical information needed to resolve these issues is periodically purged to avoid becoming too large. As a directory administrator, you must ensure that you do not purge the historical information more often than you back up your directory data.

Keep server clocks synchronized for your topology. You can use NTP for example. Keeping server clocks synchronized helps prevent issues with SSL connections and with replication itself. Keeping server clocks synchronized also makes it easier to compare timestamps from multiple servers.

8.2.2. Replication Per Suffix

The primary unit of replication is the suffix, specified by a base DN such as dc=example,dc=com.[13] Replication also depends on the directory schema, defined on cn=schema, and the cn=admin data suffix with administrative identities and certificates for protecting communications. Thus that content gets replicated as well.

The set of OpenDJ servers replicating data for a given suffix is called a replication topology. You can have more than one replication topology. For example, one topology could be devoted to dc=example,dc=com, and another to dc=example,dc=org. OpenDJ servers serve more than one suffix, and participate in more than one replication topology.

Within a replication topology, the suffixes being replicated are identified to the replication servers by their DNs. All the replication servers are fully connected in a topology. Consequently it is impossible to have multiple separate, independent topologies for data under the same DN within the overall set of servers. This is illustrated in the following diagram.

8.2.3. Replication Connection Selection

In order to understand what happens when individual servers stop responding due to a network partition or a crash, know that OpenDJ can offer both directory service and also replication service, and the two services are not the same, even if they can run alongside each other in the same OpenDJ server in the same Java Virtual Machine.

Replication relies on the replication service provided by OpenDJ replication servers, where OpenDJ directory servers publish changes made to their data, and subscribe to changes published by other OpenDJ directory servers. A replication server manages replication data only, handling replication traffic with directory servers and with other replication servers, receiving, sending, and storing only changes to directory data rather than directory data itself. Once a replication server is connected to a replication topology, it maintains connections to all other replication servers in that topology.

A directory server handles directory data. It responds to requests, stores directory data and historical information. For each replicated suffix, such as dc=example,dc=com, cn=schema and cn=admin data, the directory server publishes changes to a replication server, and subscribes to changes from that replication server. (Directory servers do not publish changes to other directory servers.) A directory server also resolves any conflicts that arise when reconciling changes from other directory servers, using the historical information about changes to resolve the conflicts. (Conflict resolution is the responsibility of the directory server rather than the replication server.)

Once a directory server is connected to a replication topology for a particular suffix, it connects to one replication server at a time for that suffix. The replication server provides the directory server with a list of all replication servers for that suffix. Given the list of possible replication servers to which it can connect, the directory server can determine which replication server to connect to when starting up, or when the current connection is lost or becomes unresponsive.

For each replicated suffix, a directory server prefers to connect to a replication server:

1. In the same group as the directory server

2. Had the same initial data for the suffix as the directory server

3. If initial data was the same, has all the latest changes from the directory server

4. Runs in the same Java Virtual Machine as the directory server

5. Has the most available capacity relative to other eligible replication servers

Available capacity depends on how many directory servers in the topology are already connected to a replication server, and what proportion of all directory servers in the topology ought to be connected to the replication server.

To determine what proportion of the total number of directory servers should be connected to a replication server, OpenDJ uses replication server weight. When configuring a replication server, you can assign it a weight (default: 1). The weight property takes an integer that indicates capacity to provide replication service relative to other servers. For example, a weight of 2 would indicate a replication server that can handle twice as many connected servers as a replication server with weight 1.

The proportion of directory servers in a topology that should be connected to a given replication server is equal to (replication server weight)/(sum of replication server weights). In other words, if there are four replication servers in a topology each with default weights, the proportion for each replication server is 1/4.

Consider a situation where seven directory servers are connected to replication servers A, B, C, and D for dc=example,dc=com data. Suppose two directory servers each are connected to A, B, and C, and once directory server is connected to replication server D. Replication server D is therefore the server with the most available capacity relative to other replication servers in the topology. All other criteria being equal, replication server D is the server to connect to when an eighth directory server joins the topology.

The directory server regularly updates the list of replication servers in case it must reconnect. As available capacity of replication servers for each replication topology can change dynamically, a directory server can potentially reconnect to another replication server to balance the replication load in the topology. For this reason the server can also end up connected to different replication servers for different suffixes.

8.3. Configuring Replication

This section shows how to configure replication with command-line tools, such as the dsreplication command, described in dsreplication(1) in the OpenDJ Reference.

8.3.1. Enabling Replication

You can start the replication process by using the dsreplication enable command:

$dsreplication \ enable \ --adminUID admin \ --adminPassword password \ --baseDN dc=example,dc=com \ --host1 opendj.example.com \ --port1 4444 \ --bindDN1 "cn=Directory Manager" \ --bindPassword1 password \ --replicationPort1 8989 \ --host2 opendj2.example.com \ --port2 4444 \ --bindDN2 "cn=Directory Manager" \ --bindPassword2 password \ --replicationPort2 8989 \ --trustAll \ --no-prompt Establishing connections ..... Done. Checking registration information ..... Done. Updating remote references on server opendj.example.com:4444 ..... Done. Configuring Replication port on server opendj2.example.com:4444 ..... Done. Updating replication configuration for baseDN dc=example,dc=com on server opendj.example.com:4444 ..... Done. Updating replication configuration for baseDN dc=example,dc=com on server opendj2.example.com:4444 ..... Done. Updating registration configuration on server opendj.example.com:4444 ..... Done. Updating registration configuration on server opendj2.example.com:4444 ..... Done. Updating replication configuration for baseDN cn=schema on server opendj.example.com:4444 ..... Done. Updating replication configuration for baseDN cn=schema on server opendj2.example.com:4444 ..... Done. Initializing registration information on server opendj2.example.com:4444 with the contents of server opendj.example.com:4444 ..... Done. Initializing schema on server opendj2.example.com:4444 with the contents of server opendj.example.com:4444 ..... Done. Replication has been successfully enabled. Note that for replication to work you must initialize the contents of the base DN's that are being replicated (use dsreplication initialize to do so). See /var/.../opends-replication-7958637258600693490.log for a detailed log of this operation.  To enable secure connections for replication use the --secureReplication1 and --secureReplication2 options, which are equivalent to selecting Configure as Secure in the replication topology options screen of the setup wizard. As you see in the command output, replication is set up to function once enabled. You must, however, initialize replication in order to start the process. Tip When scripting the configuration to set up multiple replicas in quick succession, use the same initial replication server each time you run the command. In other words, pass the same --host1, --port1, --bindDN1, --bindPassword1, and --replicationPort1 options for each of the other replicas that you set up in your script. If you need to add another OpenDJ directory server to participate in replication, use the dsreplication enable with the new server as the second server. 8.3.2. Initializing Replicas You can initialize replication between servers by performing initialization over the network after you have enabled replication, or by importing the same LDIF data on all servers and then enabling replication. You can also add a new server by restoring a backup from an existing replica onto the new server and then enabling replication with an existing replica. The alternatives are described step-by-step in the following procedures: Procedure 8.1. To Initialize Replication Over the Network Initialization over the network while the server is online works well when you have no initial data, or when your network bandwidth is large compared to the initial amount of data to replicate. 1. Enable replication on all servers. See Section 8.3.1, "Enabling Replication" for instructions. 2. Start replication with the dsreplication initialize-all command: $ dsreplication \
initialize-all \
--baseDN dc=example,dc=com \
--hostname opendj.example.com \
--port 4444 \
--trustAll \
--no-prompt

Initializing base DN dc=example,dc=com with the contents from
opendj.example.com:4444: 160 entries processed (100 % complete).
Base DN initialized successfully.

See
/var/.../opends-replication-5020375834904394170.log
for a detailed log of this operation.

Procedure 8.2. To Initialize All Servers From the Same LDIF

This procedure can be useful when you are starting with a large amount of directory data that is available locally to all directory servers.

1. Enable replication for all servers.

Important

Enabling replication means overwriting data on the destination replica with data from the source replica, including administrative data. If the destination server replica generated encryption keys before replication was enabled, the destination server's encryption keys are overwritten when the administrative data is substituted with administrative data from the source server. Any data encrypted with the destination server's old keys can no longer be decrypted.

Once replication is enabled, however, the administrative data is also shared through replication. If you use data confidentiality to protect data stored on disk, then replication must be enabled before you import data to allow the replicas to share rather than overwrite each others' encryption keys.

See Section 8.3.1, "Enabling Replication" for instructions.

2. If you have not already done so, enable data confidentiality as described in Section 4.5, "Encrypting Directory Data" and Procedure 8.14, "To Encrypt External Change Log Data".

3. Import the same LDIF on all servers as described in Procedure 4.2, "To Import LDIF Data".

Do not yet accept updates to the directory data. Section 8.3.7, "Read-Only Replicas" shows how to prevent replicas from accepting updates from clients.

4. Allow updates to the directory data by setting writability-mode:enabled using a command like the one you found in Section 8.3.7, "Read-Only Replicas".

Procedure 8.3. To Create a New Replica From an Existing Backup

You can create a new replica from a backup of a server in the existing topology.

1. Install a new server to use as the new replica.

2. Backup the database on an existing server as described in Section 9.1, "Backing Up Directory Data".

At this point, other servers in the topology can continue to process updates.

3. Enable replication on the new replica:

$dsreplication \ enable \ --adminUID admin \ --adminPassword password \ --baseDN dc=example,dc=com \ --host1 opendj.example.com \ --port1 4444 \ --bindDN1 "cn=Directory Manager" \ --bindPassword1 password \ --replicationPort1 8989 \ --host2 opendj3.example.com \ --port2 4444 \ --bindDN2 "cn=Directory Manager" \ --bindPassword2 password \ --replicationPort2 8989 \ --trustAll \ --no-prompt Establishing connections ..... Done. Checking registration information ..... Done. Updating remote references on server opendj.example.com:4444 ..... Done. Configuring Replication port on server opendj3.example.com:4444 ..... Done. Updating replication configuration for baseDN dc=example,dc=com on server opendj.example.com:4444 ..... Done. Updating replication configuration for baseDN dc=example,dc=com on server opendj3.example.com:4444 ..... Done. Updating replication configuration for baseDN dc=example,dc=com on server opendj2.example.com:4444 ..... Done. Updating remote references on server opendj2.example.com:4444 ..... Done. Updating registration configuration on server opendj.example.com:4444 ..... Done. Updating registration configuration on server opendj3.example.com:4444 ..... Done. Updating registration configuration on server opendj2.example.com:4444 ..... Done. Updating replication configuration for baseDN cn=schema on server opendj.example.com:4444 ..... Done. Updating replication configuration for baseDN cn=schema on server opendj3.example.com:4444 ..... Done. Updating replication configuration for baseDN cn=schema on server opendj2.example.com:4444 ..... Done. Initializing registration information on server opendj3.example.com:4444 with the contents of server opendj.example.com:4444 ..... Done. Replication has been successfully enabled. Note that for replication to work you must initialize the contents of the base DN's that are being replicated (use dsreplication initialize to do so). See /var/.../opends-replication-1672058070147419978.log for a detailed log of this operation.  Contrary to the message from the command, you do not need to use the dsreplication initialize command at this point. 4. On the new server, restore the database from the backup archive as described in Procedure 9.5, "To Restore a Replica". As long as you restore the database on the new replica before the replication purge delay runs out, updates processed by other servers after you created the backup are replicated to the new server after you restore the data. Procedure 8.4. To Restore All Replicas to a Known State OpenDJ replication is designed to make directory data converge across all replicas in a topology. Directory replication mechanically applies new changes to ensure that replicated data is the same everywhere, with newer changes taking precedence over older changes. When you restore older backup data, for example, directory replication applies newer changes to the older data. This behavior is a good thing when the newer changes are correct. This behavior can be problematic in the following cases: • A bug or serious user error results in unwanted new changes that are hard to fix. • The data in a test or proof-of-concept environment must regularly be reinitialized to a known state. The dsreplication command has the following subcommands that let you reinitialize directory data, preventing replication from replaying changes that occurred before reinitialization: • The dsreplication pre-external-initialization command removes the setting for the generation ID across the topology for a specified base DN. The generation ID is an internal-use identifier that replication uses to determine what changes to apply. This halts replication. • The dsreplication post-external-initialization command sets a new generation ID across the topology, effectively resuming replication. Caution The steps in this procedure reinitialize the replication changelog, eliminating the history of changes that occurred before replication resumed. The replication changelog is described in Section 8.4, "Change Notification For Your Applications". Applications that depend on the changelog for change notifications must be reinitialized after this procedure is completed. 1. Prevent changes to the affected data during the procedure, as such changes are lost for the purposes of replication. For example, make each replica read-only as described in Section 8.3.7, "Read-Only Replicas". 2. On a single server in the topology, run the dsreplication pre-external-initialization command for the base DN holding the relevant data, as shown in the following example: $ dsreplication \
pre-external-initialization \
--baseDN dc=example,dc=com \
--hostname opendj.example.com \
--port 4444 \
--trustAll \
--no-prompt

Preparing base DN dc=example,dc=com to be initialized externally ..... Done.

Now you can proceed to the initialization of the contents of the base DNs on
all the replicated servers.  You can use the command import-ldif or the binary
copy to do so.  You must use the same LDIF file or binary copy on each server.

When the initialization is completed you must use the subcommand
'post-external-initialization' for replication to work with the new base DNs
contents.


Replication halts as the command takes effect.

Changes made at this time are not replicated, even after replication resumes.

3. On each server in the topology, restore the data in the topology to the known state in one of the following ways:

4. On a single server in the topology, run the dsreplication post-external-initialization command for the base DN holding the relevant data, as shown in the following example:

$dsreplication \ post-external-initialization \ --adminUID admin \ --adminPassword password \ --baseDN dc=example,dc=com \ --hostname opendj.example.com \ --port 4444 \ --trustAll \ --no-prompt Updating replication information on base DN dc=example,dc=com ..... Done. Post initialization procedure completed successfully.  Replication resumes as the command takes effect. 5. If you made replicas read-only, make them read-write again by setting writability-mode:enabled. 8.3.3. Stopping Replication How you stop replication depends on whether the change is meant to be temporary or permanent. Procedure 8.5. To Stop Replication Temporarily For a Replica If you must stop a server from replicating temporarily, you can do so by using the dsconfig command. Warning Do not allow modifications on the replica for which replication is disabled, as no record of such changes is kept, and the changes cause replication to diverge. 1. Disable the multimaster synchronization provider: $ dsconfig \
set-synchronization-provider-prop \
--port 4444 \
--hostname opendj2.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--set enabled:false \
--trustAll \
--no-prompt

2. When you are ready to resume replication, enable the multimaster synchronization provider:

$dsconfig \ set-synchronization-provider-prop \ --port 4444 \ --hostname opendj2.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --set enabled:true \ --trustAll \ --no-prompt  Procedure 8.6. To Stop Replication Permanently For a Replica If you need to stop a server from replicating permanently, for example in preparation to remove a server, you can do so with the dsreplication disable command. 1. Stop replication using the dsreplication disable command: $ dsreplication \
disable \
--disableAll \
--port 4444 \
--hostname opendj2.example.com \
--bindDN "cn=Directory Manager" \
--trustAll \
--no-prompt
Establishing connections ..... Done.
Disabling replication on base DN cn=admin data of server
opendj2.example.com:4444 ..... Done.
Disabling replication on base DN dc=example,dc=com of server
opendj2.example.com:4444 ..... Done.
Disabling replication on base DN cn=schema of server
opendj2.example.com:4444 ..... Done.
Disabling replication port 8989 of server
opendj2.example.com:4444 ..... Done.
Removing registration information ..... Done.
Removing truststore information ..... Done.

See
/var/.../opends-replication-125248191132797765.log
for a detailed log of this operation.


The dsreplication disable as shown completely removes the replication configuration information from the server.

2. If you want to restart replication for the server, you need to run the dsreplication enable and dsreplication initialize commands again.

8.3.4. Standalone Replication Servers

Replication in OpenDJ is designed to be both easy to implement in environments with a few servers, and also scalable in environments with many servers. You can enable the replication service on each OpenDJ directory server in your deployment, for example, to limit the number of servers you deploy. Yet in a large deployment, you can use standalone replication servers—OpenDJ servers that do nothing but relay replication messages—to configure (and troubleshoot) the replication service separately from the directory service. You only need a few standalone replication servers publishing changes to serve many directory servers subscribed to the changes. Furthermore, replication is designed such that you need only connect a directory server to the nearest replication server for the directory server to replicate with all others in your topology. Yet only the standalone replication servers participate in fully meshed replication.

All replication servers in a topology are connected to all other replication servers. Directory servers are connected only to one replication server at a time, and their connections should be to replication servers on the same LAN. Therefore the total number of replication connections, Totalconn is expressed as follows.

Equation 8.1.
Totalconn = (NRS * (NRS-1))/2 + NDS

Here, NRS is the number of replication servers, and NDS is the number of standalone directory servers. In other words, if you have only three servers, then Totalconn is three with no standalone servers. However, if you have two data centers, and need 12 directory servers, then with no standalone directory servers Totalconn is (12 * 11)/2 or 66. Yet, with four standalone replication servers, and 12 standalone directory servers, Totalconn is (4 * 3)/2 + 12, or 18, with only four of those connections needing to go over the WAN. (By running four directory servers that also run replication servers and eight standalone directory servers, you reduce the number of replication connections to 14 for 12 replicas.)

Tip

If you set up OpenDJ directory server to replicate by using the Quick Setup wizard, then the wizard activated the replication service for that server. You can turn off the replication service on OpenDJ directory server, and then configure the server to work with a separate, standalone replication server instead. Start by using the dsreplication disable --disableReplicationServer command to turn off the replication service on the server.

Procedure 8.7. To Set Up a Standalone Replication Server

This example sets up a standalone replication server to handle the replication traffic between two directory servers that do not handle replication themselves.

Here the replication server is rs.example.com. The directory servers are opendj.example.com and opendj2.example.com.

In a real deployment, you would have more replication servers to avoid a single point of failure.

1. Set up the replication server as a directory server that has no database.

2. Set up the directory servers as standalone directory servers.

3. Enable replication with --noReplicationServer or --onlyReplicationServer options:

$dsreplication \ enable \ --adminUID admin \ --adminPassword password \ --baseDN dc=example,dc=com \ --host1 opendj.example.com \ --port1 4444 \ --bindDN1 "cn=Directory Manager" \ --bindPassword1 password \ --noReplicationServer1 \ --host2 rs.example.com \ --port2 4444 \ --bindDN2 "cn=Directory Manager" \ --bindPassword2 password \ --replicationPort2 8989 \ --onlyReplicationServer2 \ --trustAll \ --no-prompt Establishing connections ..... Done. Only one replication server will be defined for the following base DN's: dc=example,dc=com It is recommended to have at least two replication servers (two changelogs) to avoid a single point of failure in the replication topology. Checking registration information ..... Done. Configuring Replication port on server rs.example.com:4444 ..... Done. Updating replication configuration for baseDN dc=example,dc=com on server opendj.example.com:4444 ..... Done. Updating registration configuration on server opendj.example.com:4444 ..... Done. Updating registration configuration on server rs.example.com:4444 ..... Done. Updating replication configuration for baseDN cn=schema on server opendj.example.com:4444 ..... Done. Initializing registration information on server rs.example.com:4444 with the contents of server opendj.example.com:4444 ..... Done. Replication has been successfully enabled. Note that for replication to work you must initialize the contents of the base DN's that are being replicated (use dsreplication initialize to do so). See /var/.../opends-replication-1720959352638609971.log for a detailed log of this operation.$ dsreplication \
enable \
--baseDN dc=example,dc=com \
--host1 opendj2.example.com \
--port1 4444 \
--bindDN1 "cn=Directory Manager" \
--noReplicationServer1 \
--host2 rs.example.com \
--port2 4444 \
--bindDN2 "cn=Directory Manager" \
--replicationPort2 8989 \
--onlyReplicationServer2 \
--trustAll \
--no-prompt

Establishing connections ..... Done.
Only one replication server will be defined for the following base DN's:
dc=example,dc=com
It is recommended to have at least two replication servers (two changelogs) to
avoid a single point of failure in the replication topology.

Checking registration information ..... Done.
Updating remote references on server rs.example.com:4444 ..... Done.
Updating replication configuration for baseDN dc=example,dc=com on server
opendj2.example.com:4444 ..... Done.
Updating replication configuration for baseDN dc=example,dc=com on server
opendj.example.com:4444 ..... Done.
Updating registration configuration on server
opendj2.example.com:4444 ..... Done.
Updating registration configuration on server
rs.example.com:4444 ..... Done.
Updating registration configuration on server
opendj.example.com:4444 ..... Done.
Updating replication configuration for baseDN cn=schema on server
opendj2.example.com:4444 ..... Done.
Updating replication configuration for baseDN cn=schema on server
opendj.example.com:4444 ..... Done.
Initializing registration information on server opendj2.example.com:4444 with
the contents of server rs.example.com:4444 ..... Done.

Replication has been successfully enabled.  Note that for replication to work
you must initialize the contents of the base DN's that are being
replicated (use dsreplication initialize to do so).

See
/var/folders/.../opends-replication-5893037538856033562.log
for a detailed log of this operation.

4. Initialize replication from one of the directory servers:

$dsreplication \ initialize-all \ --adminUID admin \ --adminPassword password \ --baseDN dc=example,dc=com \ --hostname opendj.example.com \ --port 4444 \ --trustAll \ --no-prompt Initializing base DN dc=example,dc=com with the contents from opendj.example.com:4444: 160 entries processed (100 % complete). Base DN initialized successfully. See /var/.../opends-replication-7677303986403997574.log for a detailed log of this operation.  8.3.5. Standalone Directory Server Replicas When you configure replication for an OpenDJ directory server, you can give the directory server the capability to handle replication traffic as well. As described in Section 8.3.4, "Standalone Replication Servers", OpenDJ servers can also be configured to handle only replication traffic. Alternatively you can configure an OpenDJ directory server to connect to a remote replication server of either variety, but to remain only a directory server itself. This sort of standalone directory server replica is shown in Figure 8.1, "Deployment For Multiple Data Centers". Furthermore, you can make this standalone directory server replica read-only for client applications, accepting only replication updates. Procedure 8.8. To Set Up a Standalone Directory Server Replica The following steps show how to configure the server as a standalone, directory server-only replica of an existing replicated directory server. 1. Set up replication between other servers. 2. Install the directory server without configuring replication, but creating at least the base entry to be replicated. 3. Enable replication with the appropriate --noReplicationServer option: $ dsreplication \
enable \
--baseDN dc=example,dc=com \
--host1 master.example.com \
--port1 4444 \
--bindDN1 "cn=Directory Manager" \
--host2 ds-only.example.com \
--port2 4444 \
--bindDN2 "cn=Directory Manager" \
--noReplicationServer2 \
--trustAll \
--no-prompt

Establishing connections ..... Done.
Checking registration information ..... Done.
Updating remote references on server master.example.com:4444 ..... Done.
Updating replication configuration for baseDN dc=example,dc=com
on server master.example.com:4444 ..... Done.
Updating replication configuration for baseDN dc=example,dc=com
on server ds-only.example.com:4444 ..... Done.
Updating replication configuration for baseDN dc=example,dc=com
on server master2.example.com:4444 ..... Done.
Updating remote references on server master2.example.com:4444 ..... Done.
Updating registration configuration
on server master.example.com:4444 ..... Done.
Updating registration configuration
on server ds-only.example.com:4444 ..... Done.
Updating registration configuration
on server master2.example.com:4444 ..... Done.
Updating replication configuration for baseDN cn=schema
on server master.example.com:4444 ..... Done.
Updating replication configuration for baseDN cn=schema
on server ds-only.example.com:4444 ..... Done.
Updating replication configuration for baseDN cn=schema
on server master2.example.com:4444 ..... Done.
Initializing registration information on server ds-only.example.com:4444
with the contents of server master.example.com:4444 ..... Done.
Initializing schema on server ds-only.example.com:4444
with the contents of server master.example.com:4444 ..... Done.

Replication has been successfully enabled.  Note that for replication to work
you must initialize the contents of the base DNs that are being replicated
(use dsreplication initialize to do so).

See
/var/.../opendj-replication-859181866587327450.log
for a detailed log of this operation.


Here the existing server is both directory server and replication server. If the existing server is a standalone replication server, then also use the appropriate --onlyReplicationServer option.

4. Initialize data on the new directory server replica:

$dsreplication \ initialize \ --adminUID admin \ --adminPassword password \ --baseDN dc=example,dc=com \ --hostSource master.example.com \ --portSource 4444 \ --hostDestination ds-only.example.com \ --portDestination 4444 \ --trustAll \ --no-prompt Initializing base DN dc=example,dc=com with the contents from master.example.com:4444: 0 entries processed (0 % complete). 176 entries processed (100 % complete). Base DN initialized successfully. See /var/.../opendj-replication-4326340645155418876.log for a detailed log of this operation.  5. If you want to make the directory server replica read-only for client application traffic, see Section 8.3.7, "Read-Only Replicas". 8.3.6. Replication Groups Replication lets you define groups so that replicas communicate first with replication servers in the group before going to replication servers outside the group. Groups are identified with unique numeric group IDs. Replication groups are designed for deployments across multiple data centers, where you aim to focus replication traffic on the LAN rather than the WAN. In multi-data center deployments, group nearby servers together. Procedure 8.9. To Set Up Replication Groups For each group, set the appropriate group ID for the topology on both the replication servers and the directory servers. The example commands in this procedure set up two replication groups, each with a replication server and a directory server. The directory servers are opendj.example.com and opendj2.example.com. The replication servers are rs.example.com and rs2.example.com. In a full-scale deployment, you would have multiple servers of each type in each group, such as all the replicas and replication servers in each data center being in the same group. 1. Pick a group ID for each group. The default group ID is 1. 2. Set the group ID for each group by replication domain on the directory servers: $ dsconfig \
set-replication-domain-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--domain-name "dc=example,dc=com" \
--set group-id:1 \
--trustAll \
--no-prompt

$dsconfig \ set-replication-domain-prop \ --port 4444 \ --hostname opendj2.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --domain-name "dc=example,dc=com" \ --set group-id:2 \ --trustAll \ --no-prompt  3. Set the group ID for each group on the replication servers: $ dsconfig \
set-replication-server-prop \
--port 4444 \
--hostname rs.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--set group-id:1 \
--trustAll \
--no-prompt

$dsconfig \ set-replication-server-prop \ --port 4444 \ --hostname rs2.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --set group-id:2 \ --trustAll \ --no-prompt  8.3.7. Read-Only Replicas By default all directory servers in a replication topology are read-write. You can, however, choose to make replicas take updates only from the replication protocol, and refuse updates from client applications: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj2.example.com \
--bindDN "cn=Directory Manager" \
--set writability-mode:internal-only \
--trustAll \
--no-prompt


8.3.8. Assured Replication

In standard replication, when a client requests an update operation the directory server performs the update and, if the update is successful, sends information about the update to the replication service, and sends a result code to the client application right away. As a result, the client application can conclude that the update was successful, but only on the replica that handled the update.

Assured replication lets you force the replica performing the initial update to wait for confirmation that the update has been received elsewhere in the topology before sending a result code to the client application. You can configure assured replication either to wait for one or more replication servers to acknowledge having received the update, or to wait for all directory servers to have replayed the update.

As you might imagine, assured replication is theoretically safer than standard replication, yet it is also slower, potentially waiting for a timeout before failing when the network or other servers are down.

Procedure 8.10. To Ensure Updates Reach Replication Servers

Safe data mode requires the update be sent to assured-sd-level replication servers before acknowledgement is returned to the client application.

• For each directory server, set safe data mode for the replication domain, and also set the safe data level:

$dsconfig \ set-replication-domain-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --domain-name "dc=example,dc=com" \ --set assured-type:safe-data \ --set assured-sd-level:1 \ --trustAll \ --no-prompt$ dsconfig \
set-replication-domain-prop \
--port 4444 \
--hostname opendj2.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--domain-name "dc=example,dc=com" \
--set assured-type:safe-data \
--set assured-sd-level:1 \
--trustAll \
--no-prompt

Procedure 8.11. To Ensure Updates Are Replayed Everywhere

Safe read mode requires the update be replayed on all directory servers before acknowledgement is returned to the client application.

• For each directory server, set safe read mode for the replication domain:

$dsconfig \ set-replication-domain-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --domain-name "dc=example,dc=com" \ --set assured-type:safe-read \ --trustAll \ --no-prompt$ dsconfig \
set-replication-domain-prop \
--port 4444 \
--hostname opendj2.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--domain-name "dc=example,dc=com" \
--trustAll \
--no-prompt


When working with assured replication, the replication server property degraded-status-threshold (default: 5000), sets the number of operations allowed to build up in the replication queue before the server is assigned degraded status. When a replication server has degraded status, assured replication ceases to have an effect.

8.3.9. Subtree Replication

OpenDJ can perform subtree replication, for example, replicating ou=People,dc=example,dc=com, but not the rest of dc=example,dc=com, by putting the subtree in a separate backend from the rest of the suffix.

For example, in this case you might have a userRoot backend containing everything in dc=example,dc=com except ou=People,dc=example,dc=com, and a separate peopleRoot backend for ou=People,dc=example,dc=com. Then you replicate ou=People,dc=example,dc=com in its own topology.

8.3.10. Fractional Replication

OpenDJ can perform fractional replication, whereby you specify the attributes to include in or to exclude from the replication process.

You set fractional replication configuration as fractional-include or fractional-exclude properties for a replication domain. When you include attributes, the attributes that are required on the relevant object classes are also included, whether you specify them or not. When you exclude attributes, the excluded attributes must be optional attributes for the relevant object classes. Fractional replicas still respect schema definitions.

Fractional replication filters objects at the replication server level. Each attribute must remain available on at least one replica in the topology. Fractional replication is not designed to exclude the same attribute on every replica in a topology. When you configure a replica to exclude an attribute, OpenDJ directory server checks that the attribute is never added to the replica as part of any LDAP operation. As a result, if you exclude the attribute everywhere, it can never be added anywhere.

When using fractional replication, initialize replication as you would normally. You cannot create a full replica, however, from a replica with only a subset of the data. If you must prevent data from being replicated across a national boundary, for example, split the replication server that handles updates from the directory servers as described in Procedure 8.7, "To Set Up a Standalone Replication Server".

For example, you might configure an externally facing fractional replica to include only some inetOrgPerson attributes:

$dsconfig \ set-replication-domain-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --domain-name "dc=example,dc=com" \ --trustAll \ --no-prompt \ --set \ fractional-include:inetorgperson:cn,givenname,mail,mobile,sn,telephonenumber  As another example, you might exclude a custom attribute called sessionToken from being replicated: $ dsconfig \
set-replication-domain-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--domain-name "dc=example,dc=com" \
--set fractional-exclude:*:sessionToken \
--trustAll \
--no-prompt


This last example only works if you first define a sessionToken attribute in the directory server schema.

8.3.11. Breaking a Multi-Role Server Into Standalone Components

As described in Section 8.2, "About Replication", a replication topology is made up of servers playing the role of directory server, and servers playing the role of replication server. By default, each replicated OpenDJ server plays both roles. Some deployments call for standalone directory servers and standalone replication servers, however.[14]

If possible avoid breaking apart an existing multi-role server. Instead, set up standalone servers as described in Section 8.3.4, "Standalone Replication Servers" and Section 8.3.5, "Standalone Directory Server Replicas".

The following procedure breaks a multi-role server into two standalone servers while preserving existing data. It does require disk space initially to hold copies of existing data.

Procedure 8.12. To Break a Multi-Role Server Into Standalone Components

The following steps show how to break a multi-role OpenDJ server into a standalone directory server and a standalone replication server.

While you carry out this procedure, do not allow any client traffic to the servers you modify.

1. Make sure you have already set up at least a couple of OpenDJ servers that replicate user data.

This example starts with the following multi-role servers:

• /path/to/dsrs1 (ports: 1389, 1636, 4444, 8989; replicating user data for dc=example,dc=com)

• /path/to/dsrs2 (ports: 2389, 2636, 5444, 9989; replicating user data for dc=example,dc=com)

/path/to/dsrs1 is the target server to be broken into standalone components.

When you begin, the target server has both directory server and replication server components.

Before you proceed:

• Read the rest of the procedure, and make sure you understand the steps.

• Direct client traffic away from the target server.

• Back up the target server.

2. Run the dsreplication status command before making changes:

$dsreplication \ status \ --port 4444 \ --hostname opendj.example.com \ --adminUID admin \ --adminPassword password \ --baseDN "cn=admin data" \ --baseDN cn=schema \ --baseDN dc=example,dc=com \ --trustAll \ --no-prompt Suffix DN :...: DS ID : RS ID :... ------------------:...:-------:-------:... cn=admin data :...: 29388 : 32560 :... cn=admin data :...: 7044 : 29137 :... cn=schema :...: 24612 : 32560 :... cn=schema :...: 22295 : 29137 :... dc=example,dc=com :...: 20360 : 32560 :... dc=example,dc=com :...: 12164 : 29137 :... ...  Keep the output of the command for the IDs shown. The information is used later in this procedure. 3. Temporarily disable the multimaster synchronization provider on the target server: $ dsconfig \
set-synchronization-provider-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--set enabled:false \
--trustAll \
--no-prompt


This step is also shown in Procedure 8.5, "To Stop Replication Temporarily For a Replica".

4. Temporarily disable the backend holding the replicated data:

$dsconfig \ set-backend-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --set enabled:false \ --trustAll \ --no-prompt  5. Stop the target server: $ stop-ds
Stopping Server...
... msg=The Directory Server is now stopped

6. Make two copies of the server files:

$cd /path/to/  One copy will be the standalone directory server: $ cp -r dsrs1 ds


The other copy will the standalone replication server:

$cp -r dsrs1 rs  7. Start the copy that will become the standalone directory server, remove the replication server and changelog configuration, enable the user data backend, and then enable the multimaster synchronization provider on the directory server: # The following command removes the replication server configuration. dsconfig \ delete-replication-server \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --trustAll \ --no-prompt # The following command disables the changelog for the user data # in dc=example,dc=com. dsconfig \ set-external-changelog-domain-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --domain-name dc=example,dc=com --set enabled:false --trustAll \ --no-prompt # The following command enables the user data backend. dsconfig \ set-backend-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --set enabled:true \ --trustAll \ --no-prompt # The following command enables the multimaster synchronization provider. dsconfig \ set-synchronization-provider-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --set enabled:true \ --trustAll \ --no-prompt  You can then remove the files for the changelog on the directory server: $ rm /path/to/ds/changelogDb/*

8. If the replication server is on the same host as the directory server, carefully change the connection handler port numbers and the administration port number in the configuration file before starting the replication server. Before making any changes, make sure that the new port numbers you use are available, and not in use by any other services on the system.

Change the port numbers for the LDAP and LDAPS connection handlers as described in Procedure 5.1, "To Change the LDAP Port Number".

The following example changes the administration port to 6444. After this command succeeds, you must restart the server in order to use the dsconfig command again:

$dsconfig \ set-administration-connector-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set listen-port:6444 \ --trustAll \ --no-prompt  Restart the server to be able to connect on the new administration port: $ stop-ds --restart
Stopping Server...
...
...The Directory Server has started successfully

9. Change the server ID values for the cn=admin data and cn=schema replication domains on the copy that is to become the standalone replication server.

Replication uses unique server IDs to distinguish between different directory server replicas. When you make identical copies of the original multi-role server, the server IDs on the new standalone directory server and on the new standalone replication server are identical.

For the user data replication domains, such as dc=example,dc=com, you are going to fix the duplicate server ID problem as part of this procedure. When you remove the replication domain configuration information from the new standalone replication server for user data, part of the configuration information that you remove is the server ID. For the administrative data and directory schema, however, the new standalone replication server must maintain its administrative and schema data in sync with other servers, so it still holds that data like any other directory server. The server IDs for the cn=admin data and cn=schema replication domains must therefore be changed so as not to conflict with other existing server IDs.

If you try to edit server IDs by using the dsconfig command, you encounter an error:

The Replication Domain property "server-id" is read-only and cannot be
modified


You must instead edit the server ID values directly in the configuration file while the new standalone replication server is stopped.

Before editing the configuration file, refer to the information you gather in Step 2 for the list of IDs that are in use in the replication topology. You must choose server ID values that are unique, and that are between 0 and 65535 inclusive.

After choosing two valid, unused server ID values, carefully edit the configuration file, /path/to/rs/config/config.ldif, to change the ds-cfg-server-id values for the entries with DNs cn=cn=admin data,cn=domains,cn=Multimaster Synchronization,cn=Synchronization Providers,cn=config and cn=cn=schema,cn=domains,cn=Multimaster Synchronization,cn=Synchronization Providers,cn=config.

For example, if the duplicate server IDs were 29388 and 24612, and you edited the configuration file to use 12345 and 23456 instead, the result might appear as follows:

$grep -B 1 ds-cfg-server-id /path/to/rs/config/config.ldif cn: cn=admin data #ds-cfg-server-id: 29388 ds-cfg-server-id: 12345 -- cn: cn=schema #ds-cfg-server-id: 24612 ds-cfg-server-id: 23456  10. Start the copy that is to become the standalone replication server, remove the user data backend configuration, remove the replication domain for the user data, and then enable the multimaster synchronization provider on the directory server: # The following command removes the user data backend configuration. dsconfig \ delete-backend \ --port 6444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backend-name userRoot \ --trustAll \ --no-prompt # The following command removes the replication domain for the user data. dsconfig \ delete-replication-domain \ --port 6444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --domain-name dc=example,dc=com \ --trustAll \ --no-prompt # The following command enables the multimaster synchronization provider. dsconfig \ set-synchronization-provider-prop \ --port 6444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --set enabled:true \ --trustAll \ --no-prompt  You can then remove the files for the user data backend on the replication server: $ rm -rf /path/to/rs/db/userRoot

11. If you have moved servers with secure ports configured, the host names in the server certificates might no longer correspond to the new host names.

For details see Chapter 20, "Changing Server Certificates".

12. After testing that everything is working to your satisfaction, you can allow normal client traffic to the new directory server, and retire the old multi-role server (rm -rf /path/to/dsrs1 in this example).

Some applications require notification when directory data updates occur. For example, an application might need to sync directory data with another database, or the application might need to kick off other processing when certain updates occur.

In addition to supporting persistent search operations, OpenDJ provides an external change log mechanism to allow applications to be notified of changes to directory data.

This section includes the following procedures:

Procedure 8.13. To Enable the External Change Log

OpenDJ directory servers without replication cannot expose an external change log. The OpenDJ server that exposes the change log must function both as a directory server, and also as a replication server for the suffix whose changes you want logged.

• Enable replication without using the --noReplicationServer or --onlyReplicationServer options.

With replication enabled, the data is under cn=changelog. The user reading the changelog must have appropriate access, and must have the changelog-read privilege. Directory Manager is not subject to access control, and has the privilege. The following example shows that Directory Manager can read the changelog:

$ldapsearch \ --hostname opendj.example.com \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN cn=changelog \ "(objectclass=*)" \ \* + dn: cn=changelog cn: changelog objectClass: top objectClass: container subschemaSubentry: cn=schema hasSubordinates: false entryDN: cn=changelog  If the user reading the changelog is not Directory Manager, see Procedure 8.16, "To Allow a User to Read the Change Log". Procedure 8.14. To Encrypt External Change Log Data OpenDJ directory server does not encrypt external change log data by default. This means that any user with system access to read directory files can potentially access external change log data in cleartext: $ strings /path/to/opendj/changelogDb/*/*/head.log | grep bjensen | sort | uniq
bjensen@example.com0B
bjensen@example.org0B
uid=bjensen,ou=People,dc=example,dc=com


In addition to preventing read access by other users as described in Section 19.1, "Setting Up a System Account for OpenDJ Directory Server", you can configure confidentiality for external change log data. When confidentiality is enabled, OpenDJ directory server encrypts change log records before storing them.

Important

Encrypting stored directory data does not prevent it from being sent over the network in the clear.

Apply the suggestions in Section 19.7, "Protect Directory Server Network Connections" to protect data sent over the network.

OpenDJ directory server encrypts data using a symmetric key that is stored with the server configuration. The symmetric key is encrypted in turn with the server's private key that is also stored with the server configuration. When multiple servers are configured to replicate data as described in Section 8.3, "Configuring Replication", the servers replicate the keys as well, allowing any server replica to decrypt the data.

Encrypting and decrypting data comes with costs in terms of cryptographic processing that reduces throughput and of extra space for larger encrypted values. In general, tests with default settings show that the cost of enabling confidentiality can be quite modest, but your results can vary based on your systems and on the settings used for cipher-transformation and cipher-key-length. Make sure you test your deployment to qualify the impact of confidentiality before enabling it in production.

Follow this procedure to enable confidentiality:

1. Before you enable confidentiality on a replication server for the external change log data, first enable confidentiality for data stored in directory backends.

For details, see Section 4.5, "Encrypting Directory Data".

2. Enable backend confidentiality with the default encryption settings as shown in the following example:

$dsconfig \ set-replication-server-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --set confidentiality-enabled:true \ --no-prompt \ --trustAll  Encryption applies to the entire change log regardless of the confidentiality settings for each domain. After confidentiality is enabled, new change log records are encrypted. OpenDJ directory server does not rewrite old records in encrypted form. 3. If necessary, adjust additional confidentiality settings. Use the same cipher suite for external change log confidentiality as was used to configure data confidentiality. The default settings for confidentiality are cipher-transformation: AES/CBC/PKCS5Padding and cipher-key-length: 128. This means the algorithm is the Advanced Encryption Standard (AES), the cipher mode is Cipher Block Chaining (CBC), and the padding is PKCS#5 padding as described in RFC 2898: PKCS #5: Password-Based Cryptography Specification. The syntax for the cipher-transformation is algorithm/mode/padding, and all three must be specified. When the algorithm does not require a mode, use NONE. When the algorithm does not require padding, use NoPadding. Use of larger cipher-key-length values can require that you install JCE policy files such as those for unlimited strength. Procedure 8.15. To Use the External Change Log You read the external change log over LDAP. In addition, when you poll the change log periodically, you can get the list of updates that happened since your last request. The external change log mechanism uses an LDAP control with OID 1.3.6.1.4.1.26027.1.5.4 to allow the exchange of cookies for the client application to bookmark the last changes seen, and then start reading the next set of changes from where it left off on the previous request. This procedure shows the client reading the change log as cn=Directory Manager. Make sure your client application reads the changes with sufficient access and privileges to view all the changes it needs to see. 1. Send an initial search request using the LDAP control with no cookie value. Notice the value of the changeLogCookie attribute for the last of the two changes: $ ldapsearch \
--baseDN cn=changelog \
--port 1389 \
--bindDN "cn=Directory Manager" \
--control "1.3.6.1.4.1.26027.1.5.4:false" \
"(objectclass=*)" \
\* +
dn: cn=changelog
cn: changelog
objectClass: top
objectClass: container
subschemaSubentry: cn=schema
hasSubordinates: true
entryDN: cn=changelog

# Public changelog exchange control(1.3.6.1.4.1.26027.1.5.4):
dc=example,dc=com:0000013087cbc28212d100000001;
dn: replicationCSN=0000013087cbc28212d100000001,dc=example,dc=com,cn=changelog
targetDN: cn=arsene lupin,ou=special users,dc=example,dc=com
changeNumber: 0
changes:: b2JqZWN0Q2xhc3M6IHBlcnNvbgpvYmplY3RDbGFzczogdG9wCmNuOiBBcnNlbmUgTHVwaW
4KdGVsZXBob25lTnVtYmVyOiArMzMgMSAyMyA0NSA2NyA4OQpzbjogTHVwaW4KZW50cnlVVUlEOiA5M
GM3MTRmNy00ODZiLTRkNDctOTQwOS1iNDRkMTlkZWEzMWUKY3JlYXRlVGltZXN0YW1wOiAyMDExMDYx
MzA2NTg1NVoKY3JlYXRvcnNOYW1lOiBjbj1EaXJlY3RvcnkgTWFuYWdlcixjbj1Sb290IEROcyxjbj1
jb25maWcK
changeTime: 20110613065855Z
objectClass: top
objectClass: changeLogEntry
targetEntryUUID: 90c714f7-486b-4d47-9409-b44d19dea31e
replicationCSN: 0000013087cbc28212d100000001
numSubordinates: 0
replicaIdentifier: 4817
changeInitiatorsName: cn=Directory Manager,cn=Root DNs,cn=config
subschemaSubentry: cn=schema
hasSubordinates: false
entryDN: replicationCSN=0000013087cbc28212d100000001,dc=example,dc=com,cn=change
log

# Public changelog exchange control(1.3.6.1.4.1.26027.1.5.4):
dc=example,dc=com:0000013087cbc34a12d100000002;
dn: replicationCSN=0000013087cbc34a12d100000002,dc=example,dc=com,cn=changelog
targetDN: cn=horace velmont,ou=special users,dc=example,dc=com
changeNumber: 0
changes:: b2JqZWN0Q2xhc3M6IHBlcnNvbgpvYmplY3RDbGFzczogdG9wCmNuOiBIb3JhY2UgVmVsbW
9udAp0ZWxlcGhvbmVOdW1iZXI6ICszMyAxIDEyIDIzIDM0IDQ1CnNuOiBWZWxtb250CmVudHJ5VVVJR
DogNmIyMjQ0MGEtNzZkMC00MDMxLTk0YjctMzViMWQ4NmYwNjdlCmNyZWF0ZVRpbWVzdGFtcDogMjAx
MTA2MTMwNjU4NTVaCmNyZWF0b3JzTmFtZTogY249RGlyZWN0b3J5IE1hbmFnZXIsY249Um9vdCBETnM
sY249Y29uZmlnCg==
changeTime: 20110613065855Z
objectClass: top
objectClass: changeLogEntry
targetEntryUUID: 6b22440a-76d0-4031-94b7-35b1d86f067e
replicationCSN: 0000013087cbc34a12d100000002
numSubordinates: 0
replicaIdentifier: 4817
changeInitiatorsName: cn=Directory Manager,cn=Root DNs,cn=config
subschemaSubentry: cn=schema
hasSubordinates: false
entryDN: replicationCSN=0000013087cbc34a12d100000002,dc=example,dc=com,cn=change
log


In this example, two new users were added to another replica before the change log request was made.

Here the changes are base64-encoded, so you can decode them using the base64 command:

$base64 decode --encodedData b2JqZW...ZmlnCg== objectClass: person objectClass: top cn: Horace Velmont telephoneNumber: +33 1 12 23 34 45 sn: Velmont entryUUID: 6b22440a-76d0-4031-94b7-35b1d86f067e createTimestamp: 20110613065855Z creatorsName: cn=Directory Manager,cn=Root DNs,cn=config  2. For the next search, provide the cookie to start reading where you left off last time. In this example, a description was added to Babs Jensen's entry: $ ldapsearch \
--baseDN cn=changelog \
--port 1389 \
--bindDN "cn=Directory Manager" \
--control "1.3.6.1.4.1.26027.1.5.4:false:dc=example, \
dc=com:0000013087cbc34a12d100000002;" \
"(objectclass=*)" \
\* +
dn: cn=changelog
cn: changelog
objectClass: top
objectClass: container
subschemaSubentry: cn=schema
hasSubordinates: true
entryDN: cn=changelog

# Public changelog exchange control(1.3.6.1.4.1.26027.1.5.4):
dc=example,dc=com:0000013087d7e27f12d100000003;
dn: replicationCSN=0000013087d7e27f12d100000003,dc=example,dc=com,cn=changelog
targetDN: uid=bjensen,ou=people,dc=example,dc=com
changeNumber: 0
changes:: YWRkOiBkZXNjcmlwdGlvbgpkZXNjcmlwdGlvbjogQSB0aGlyZCBjaGFuZ2UKLQpyZXBsYW
NlOiBtb2RpZmllcnNOYW1lCm1vZGlmaWVyc05hbWU6IGNuPURpcmVjdG9yeSBNYW5hZ2VyLGNuPVJvb
3QgRE5zLGNuPWNvbmZpZwotCnJlcGxhY2U6IG1vZGlmeVRpbWVzdGFtcAptb2RpZnlUaW1lc3RhbXA6
IDIwMTEwNjEzMDcxMjEwWgotCg==
changeType: modify
changeTime: 20110613071210Z
objectClass: top
objectClass: changeLogEntry
targetEntryUUID: fc252fd9-b982-3ed6-b42a-c76d2546312c
replicationCSN: 0000013087d7e27f12d100000003
numSubordinates: 0
replicaIdentifier: 4817
changeInitiatorsName: cn=Directory Manager,cn=Root DNs,cn=config
subschemaSubentry: cn=schema
hasSubordinates: false
entryDN: replicationCSN=0000013087d7e27f12d100000003,dc=example,dc=com,cn=change
log


If we base64-decode the changes, we see the following:

$base64 decode --encodedData YWRkO...gotCg== add: description description: A third change - replace: modifiersName modifiersName: cn=Directory Manager,cn=Root DNs,cn=config - replace: modifyTimestamp modifyTimestamp: 20110613071210Z -  3. If for some reason you lose the cookie, you can start over from the earliest available change by sending a search request with no value for the cookie. Procedure 8.16. To Allow a User to Read the Change Log For a user to read the changelog, the user must have access to read, search, and compare changelog attributes, might have access to use the control to read the external changelog, and must have the changelog-read privilege. 1. Give the user access to read and search the changelog. The following example adds a global ACI to give My App access to the changelog: $ dsconfig \
set-access-control-handler-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
(version 3.0; acl \"My App can access cn=changelog\"; \
userdn=\"ldap:///cn=My App,ou=Apps,dc=example,dc=com\";)" \
--trustAll \
--no-prompt

2. Give the user access to use the control.

The following example adds a global ACI to give My App access to use the control:

$dsconfig \ set-access-control-handler-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --add global-aci:"(targetcontrol=\"1.3.6.1.4.1.26027.1.5.4\")\ (version 3.0; acl \"My App control access\"; \ allow (read) \ userdn=\"ldap:///cn=My App,ou=Apps,dc=example,dc=com\";)" \ --trustAll \ --no-prompt  3. Give the user the changelog-read privilege: $ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
dn: cn=My App,ou=Apps,dc=example,dc=com
changetype: modify

Processing MODIFY request for cn=My App,ou=Apps,dc=example,dc=com
MODIFY operation successful for DN cn=My App,ou=Apps,dc=example,dc=com

4. Test that the user can read the changelog:

$ldapsearch \ --baseDN cn=changelog \ --port 1389 \ --bindDN "cn=My App,ou=Apps,dc=example,dc=com" \ --bindPassword password \ --control "1.3.6.1.4.1.26027.1.5.4:false" \ "(objectclass=*)" \ \* + dn: cn=changelog objectClass: top objectClass: container cn: changelog subschemaSubentry: cn=schema hasSubordinates: true entryDN: cn=changelog # Public changelog exchange control(1.3.6.1.4.1.26027.1.5.4): dc=example,dc=com:...; dn: replicationCSN=0000015530c8479f20d800000001,dc=example,dc=com,cn=changelog objectClass: top objectClass: changeLogEntry ...  Procedure 8.17. To Include Unchanged Attributes in the External Change Log As shown above, the changes returned from a search on the external change log include only what was actually changed. If you have applications that need additional attributes published with every change log entry, regardless of whether or not the attribute itself has changed, then specify those using ecl-include and ecl-include-for-deletes. 1. Set the attributes to include for all update operations with ecl-include: $ dsconfig \
set-external-changelog-domain-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--domain-name dc=example,dc=com \
--set ecl-include:"@person" \
--trustAll \
--no-prompt

2. Set the attributes to include for deletes with ecl-include-for-deletes:

$dsconfig \ set-external-changelog-domain-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --domain-name dc=example,dc=com \ --add ecl-include-for-deletes:"*" \ --add ecl-include-for-deletes:"+" \ --trustAll \ --no-prompt  Procedure 8.18. To Limit External Change Log Content You can limit external change log content by disabling the domain for a base DN. By default, cn=schema and cn=admin data are not enabled. • Prevent OpenDJ from logging changes by disabling the domain: $ dsconfig \
set-external-changelog-domain-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--domain-name dc=example,dc=com \
--set enabled:false \
--trustAll \
--no-prompt

Procedure 8.19. To Align Draft Change Numbers

The external change log can be used by applications that follow the Internet-Draft: Definition of an Object Class to Hold LDAP Change Records, and that cannot use change log cookies shared across the replication topology. Nothing special is required to get the objects specified for this legacy format, but there are steps you must perform to align change numbers across replicas.

Change numbers described in the Internet-Draft are simple numbers, not cookies. When change log numbers are aligned across replicas, applications fail over from one replica to another when necessary.

If you do not align the change numbers, each server keeps its own count. The same change numbers can refer to different changes on different replicas.

For example, if you install a new replica and initialize replication from an existing server, the last change numbers are likely to differ. The following example shows different last change numbers for an existing server and for a new replica that has just been initialized from the existing replica:

$ldapsearch \ --hostname existing.example.com \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN "" \ --searchScope base \ "(&)" lastChangeNumber dn: lastChangeNumber: 285924 Result Code: 0 (Success)$ ldapsearch \
--hostname new.example.com \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN "" \
--searchScope base \
"(&)" lastChangeNumber
dn:
lastChangeNumber: 198643

Result Code:  0 (Success)


When you add a new replica to an existing topology, follow these steps to align the change numbers with those of an existing server.

These steps can also be used at any time to align the change numbers:

1. Make sure that the new replica has the same replication configuration as the existing replica.

Specifically, both replicas must replicate the same suffixes in order for the change number calculations to be the same on both replicas. If the suffix configurations differ, the change numbers cannot be aligned.

2. If you must start the new replica's change numbering from a specific change, determine the changeNumber to use.

The changeNumber must be from a change that has not yet been purged according to the replication purge delay, which by default is three days.

3. Using the dsreplication command installed with the new replica, reset the change number on the new replica to the change number from the existing replica.

The following example does not specify the change number to use. By default, the new replica uses the last change number from the existing replica:

$dsreplication \ reset-change-number \ --adminUID admin \ --adminPassword password \ --hostSource existing.example.com \ --portSource 4444 \ --hostDestination new.example.com \ --portDestination 4444 \ --trustAll \ --no-prompt Change-log change number reset task has finished successfully. See /path/to/opendj-replication-....log for a detailed log of this operation.  At this point, the new replica's change log starts with the last change number from the existing replica. Earlier change numbers are no longer present in the new replica's change log. 8.5. Recovering From User Error This section covers how to restore accidentally deleted or changed data. Changes to a replicated OpenDJ directory service are similar to those made with the Unix rm command, but with a twist. With the rm command, if you make a mistake you can restore your files from backup, and lose only the work done since the last backup. If you make a mistake with a update to the directory service however, then after you restore a server from backup, replication efficiently replays your mistake to the server you restored. There is more than one way to recover from user error. None of the ways involve simply changing OpenDJ settings. All of the ways instead involve manually fixing mistakes. Consider these alternatives: • Encourage client applications to provide end users with undo capability if necessary. In this case, client applications take responsibility for keeping an undo history. • Maintain a record of each update to the service, so that you can manually "undo" mistakes. You can use the external change log. A primary advantage to the external change log is that the change log is enabled with replication, and so it does not use additional space. See Section 8.4, "Change Notification For Your Applications" for instructions on enabling, using, and configuring the external change log. In particular, see Procedure 8.17, "To Include Unchanged Attributes in the External Change Log" for instructions on saving not only what is changed, but also all attributes when an entry is deleted. OpenDJ also provides a file-based audit log, but the audit log does not help with a general solution in this case. The OpenDJ audit log records changes to the data. When you delete an entry however, the audit log does not record the entry before deletion. The following example shows the audit log records of some changes made to Barbara Jensen's entry: # 30/Apr/2014:16:23:29 +0200; conn=7; op=10 dn: uid=bjensen,ou=People,dc=example,dc=com changetype: modify replace: description description: This is the description I want. - replace: modifiersName modifiersName: cn=Directory Manager,cn=Root DNs,cn=config - replace: modifyTimestamp modifyTimestamp: 20140430142329Z # 30/Apr/2014:16:23:46 +0200; conn=7; op=14 dn: uid=bjensen,ou=People,dc=example,dc=com changetype: modify replace: description description: I never should have changed this! - replace: modifiersName modifiersName: cn=Directory Manager,cn=Root DNs,cn=config - replace: modifyTimestamp modifyTimestamp: 20140430142346Z # 30/Apr/2014:16:24:53 +0200; conn=7; op=27 dn: uid=bjensen,ou=People,dc=example,dc=com changetype: delete  You can use these records to fix the mistaken update to the description, but the audit log lacks the information needed to restore Barbara Jensen's deleted entry. • For administrative errors that involve directory data, if you have properly configured the external change log, then use it. If not, an alternative technique consists of restoring backup to a separate server not connected to the replication topology. (Do not connect the server to the topology as replication replays mistakes, too.) Compare data on the separate restored server to the live servers in the topology, and then fix the mistakes manually. A more drastic alternative consists of rebuilding the entire service from backup, by disabling replication and restoring all servers from backup (or restoring one server and initializing all servers from that one). This alternative is only recommended in the case of a major error where you have a very fresh backup (taken immediately before the error), and no client applications are affected. • For administrative configuration errors that prevent servers from starting, know that OpenDJ keeps a copy of the last configuration that OpenDJ could use to start the server in the file /path/to/opendj/config/config.ldif.startok. OpenDJ also backs up earlier versions of the configuration under /path/to/opendj/config/archived-configs/. You can therefore compare the current configuration with the earlier configurations, and repair mistakes manually (avoiding trailing white space at the end of LDIF lines) while the server is down. [12] Assured replication can require, however, that the convergence happen before the client application is notified that the operation was successful. [13] When you configure partial and fractional replication, however, you can replicate only part of a suffix, or only certain attributes on entries. Also, if you split your suffix across multiple backends, then you need to set up replication separately for each part of suffix in a different backend. [14] In practice, "standalone" technically usually refers only to the role with respect to replication of user data. In fact standalone servers generally continue to play both roles for server configuration data under cn=admin data and cn=schema. The update traffic to these suffixes is, however, generally orders of magnitude lower than update traffic for user data. Chapter 9. Backing Up and Restoring Data This chapter covers management of directory data backup archives. For information on managing directory data in an interoperable format that is portable between directory server products, see Chapter 4, "Managing Directory Data" instead. In this chapter you will learn to: • Create backup archives • Restore data from backup archives OpenDJ lets you back up and restore your data either in compressed, binary format, or in LDIF. This chapter shows you how to back up and to restore OpenDJ data from archives, and explains portability of backup archives, as well as backing up server configuration information. 9.1. Backing Up Directory Data A bak/ directory is provided when you install OpenDJ, as a location to save binary backups. When you create a backup, the bak/backup.info contains information about the archive. Archives produced by the backup command contain backups only of the directory data. Backups of server configuration are found in config/archived-configs/. Important The backup command can encrypt the backup data. It encrypts the data using a symmetric key that is stored with the server configuration. The symmetric key is encrypted in turn with the server's private key that is also stored with the server configuration. When multiple servers are configured to replicate data as described in Chapter 8, "Managing Data Replication", the servers replicate the keys as well, allowing any server replica to decrypt the backup data. If ever all servers in the replication topology are lost, new servers can no longer decrypt any encrypted backup files. To work around this limitation, maintain a file system backup of at least one server from each replication topology in your deployment. To recover from a disaster where all servers in the topology were lost, restore the server files from the file system backup, and start the restored server. Other new servers whose data you restore from encrypted backup can then obtain the decryption keys from the restored server as described in Procedure 9.5, "To Restore a Replica". This section includes the following procedures: Procedure 9.1. To Back Up Data Immediately To perform online backup, you start backup as a task by connecting to the administrative port and authenticating as a user with the backend-backup privilege, and also setting a start time for the task by using the --start option. To perform offline backup when OpenDJ directory server is stopped, you run the backup command, described in backup(1) in the OpenDJ Reference, without connecting to the server, authenticating, or requesting a backup task. • Use one of the following alternatives: • Back up only the database for Example.com, where the data is stored in the backend named userRoot. The following example requests an online backup task that starts immediately, backing up only the userRoot backend: $ backup \
--port 4444 \
--bindDN "cn=Directory Manager" \
--backendID userRoot \
--backupDirectory /path/to/opendj/bak \
--start 0
Backup task 20110613143715983 scheduled to start Jun 13, 2011 2:37:15 PM CEST

• Stop the server to back up Example.com data offline.

The following example stops OpenDJ, runs offline backup, and starts the server after backup has completed:

$stop-ds Stopping Server... [13/Jun/2011:14:31:00 +0200] category=BACKEND severity=NOTICE msgID=9896306 msg=The backend userRoot is now taken offline [13/Jun/2011:14:31:00 +0200] category=CORE severity=NOTICE msgID=458955 msg=The Directory Server is now stopped$ backup --backendID userRoot -d /path/to/opendj/bak
[13/Jun/2011:14:33:48 +0200] category=TOOLS severity=NOTICE msgID=10944792
msg=Starting backup for backend userRoot
...
[13/Jun/2011:14:33:48 +0200] category=TOOLS severity=NOTICE msgID=10944795
msg=The backup process completed successfully
$start-ds ... The Directory Server has started successfully  • Back up all user data on the server. The following example requests an online backup task that starts immediately, backing up all backends: $ backup \
--port 4444 \
--bindDN "cn=Directory Manager" \
--backUpAll \
--backupDirectory /path/to/opendj/bak \
--start 0
Backup task 20110613143801866 scheduled to start Jun 13, 2011 2:38:01 PM CEST

Procedure 9.2. To Schedule Data Backup

You can schedule online data backup using crontab format.

• Back up all user data every night at 2 AM, and notify diradmin@example.com when finished, or on error:

$backup \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backUpAll \ --backupDirectory /path/to/opendj/bak \ --recurringTask "00 02 * * *" \ --completionNotify diradmin@example.com \ --errorNotify diradmin@example.com Recurring Backup task BackupTask-988d6adf-4d65-44bf-8546-6ea74a2480b0 scheduled successfully  Procedure 9.3. To Schedule Incremental Data Backup You can schedule an incremental backup by using the --incremental option. If you do not set the --incrementalBaseID option, then OpenDJ increments based on the last backup taken. • Back up userRoot backend data incrementally every night at 3 AM, and notify diradmin@example.com when finished, or on error: $ backup \
--port 4444 \
--bindDN "cn=Directory Manager" \
--backupDirectory /path/to/opendj/bak \
--backendID userRoot \
--incremental \
--recurringTask "00 03 * * *" \
scheduled successfully


9.2. Restoring Directory Data From Backup

When you restore data, the procedure to follow depends on whether the OpenDJ directory server is replicated.

Procedure 9.4. To Restore a Stand-alone Server

To restore OpenDJ when the server is online, you start a restore task by connecting to the administrative port and authenticating as a user with the backend-restore privilege, and also setting a start time for the task by using the --start option.

To restore data when OpenDJ directory server is stopped, you run the restore command, described in restore(1) in the OpenDJ Reference, without connecting to the server, authenticating, or requesting a restore task.

• Use one of the following alternatives:

• Stop the server to restore data for Example.com.

The following example stops OpenDJ, restores data offline from one of the available backups, and then starts the server after the restore is complete:

$stop-ds Stopping Server... [13/Jun/2011:15:44:06 +0200] category=BACKEND severity=NOTICE msgID=9896306 msg=The backend userRoot is now taken offline [13/Jun/2011:15:44:06 +0200] category=CORE severity=NOTICE msgID=458955 msg=The Directory Server is now stopped$ restore --backupDirectory /path/to/opendj/bak --listBackups
Backup ID:          20110613080032
Backup Date:        13/Jun/2011:08:00:45 +0200
Is Incremental:     false
Is Compressed:      false
Is Encrypted:       false
Has Unsigned Hash:  false
Has Signed Hash:    false
Dependent Upon:     none
$restore --backupDirectory /path/to/opendj/bak --backupID 20110613080032 [13/Jun/2011:15:47:41 +0200] ... msg=Restored: 00000000.jdb (size 341835)$ start-ds
... The Directory Server has started successfully

• Schedule the restore as a task to begin immediately.

The following example requests an online restore task, scheduled to start immediately:

$restore \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --backupDirectory /path/to/opendj/bak \ --backupID 20110613080032 \ --start 0 Restore task 20110613155052932 scheduled to start Jun 13, 2011 3:50:52 PM CEST  Procedure 9.5. To Restore a Replica After you restore a replica from backup, replication brings the replica up to date with changes that happened after you created the backup. In order to bring the replica up to date, replication must apply changes that happened after the backup was made. Replication uses internal change log records to determine what changes to apply. Internal change log records are not kept forever, though. Replication is configured to purge the change log of old changes, preventing the log from growing indefinitely. Yet, for replication to determine what changes to apply to a restored replica, it must find change log records dating back at least to the last change in the backup. In other words, replication can bring the restored replica up to date as long as the change log records used to determine which changes to apply have not been purged. Therefore, when you restore a replicated server from backup, make sure the backup you use is newer than the last purge of the replication change log (default: 3 days). If all your backups are older than the replication purge delay, do not restore from a backup, but instead initialize a new replica as described in Section 8.3.2, "Initializing Replicas". 1. When restoring data from encrypted backup, enable replication between the new replica server and a server from the existing topology as described in Section 8.3.1, "Enabling Replication". If the backup is not encrypted, you can skip this step. This step initiates OpenDJ's key distribution capability, which makes it possible for the replica to obtain secret keys for decrypting backup data from existing replicas. Without the secret key for decryption, the new server cannot read the encrypted backup to restore. Important After a disaster leading to the loss of all servers in the replication topology, you must first restore a server from file system backup as described in Section 9.1, "Backing Up Directory Data". When the restored server is running, enable replication between the new replica server and the restored server. It is not necessary to initialize replication in this step, as you will restore the data in the next step. 2. Restore the server database from the backup archive that you are sure is newer than the last purge of the replication change log: $ stop-ds
Stopping Server...

[13/Jun/2011:15:44:06 +0200] category=BACKEND severity=NOTICE msgID=9896306
msg=The backend userRoot is now taken offline
[13/Jun/2011:15:44:06 +0200] category=CORE severity=NOTICE msgID=458955
msg=The Directory Server is now stopped
$restore --backupDirectory /path/to/opendj/bak --listBackups Backup ID: 20110613080032 Backup Date: 13/Jun/2011:08:00:45 +0200 Is Incremental: false Is Compressed: false Is Encrypted: false Has Unsigned Hash: false Has Signed Hash: false Dependent Upon: none$ restore --backupDirectory /path/to/opendj/bak --backupID 20110613080032
[13/Jun/2011:15:47:41 +0200] ... msg=Restored: 00000000.jdb (size 341835)
$start-ds ... The Directory Server has started successfully  Chapter 10. Configuring Password Policy This chapter covers password policy including examples for common use cases. In this chapter you will learn to: • Decide what type of password policy is needed • Discover which password policy applies for a given user • Configure server-based and subentry-based password policies • Assign password policies to users and to groups • Configure automated password generation, password storage schemes, and validation of new passwords to reject invalid passwords before they are set If you want to synchronize password policy across your organization and your applications go to the directory for authentication, then the directory can be a good place to enforce your password policy uniformly. Even if you do not depend on the directory for all your password policy, you no doubt still want to consider directory password policy if only to choose the appropriate password storage scheme. 10.1. About OpenDJ Password Policies OpenDJ password policies govern not only passwords, but also account lockout, and how OpenDJ provides notification about account status. OpenDJ directory server supports password policies as part of the server configuration, and subentry password policies as part of the (replicated) user data. 10.1.1. Server-Based Password Policies You manage server-based password policies in the OpenDJ directory server configuration by using the dsconfig command. As they are part of the server configuration, such password policies are not replicated. You must instead apply password policy configuration updates to each replica in your deployment. By default, OpenDJ directory server includes two password policy configurations, one default for all users, and another default for directory root DN users, such as cn=Directory Manager. You can see all the default password policy settings by using the dsconfig command as follows: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "Default Password Policy" \
Property                                  : Value(s)
------------------------------------------:--------------------------
default-password-storage-scheme           : Salted SHA-1
force-change-on-reset                     : false
idle-lockout-interval                     : 0 s
lockout-duration                          : 0 s
lockout-failure-count                     : 0
lockout-failure-expiration-interval       : 0 s
max-password-age                          : 0 s
max-password-reset-age                    : 0 s
min-password-age                          : 0 s
password-expiration-warning-interval      : 5 d
password-history-duration                 : 0 s
require-change-by-time                    : -
require-secure-authentication             : false
state-update-failure-policy               : reactive


For detailed descriptions of each property, see "Password Policy" in the OpenDJ Reference.

Notice that many capabilities are not set by default: no lockout, no password expiration, no multiple passwords, no password validator to check that passwords contain the appropriate mix of characters. This means that if you decide to use the directory to enforce password policy, you must configure at least the default password policy to meet your needs.

A few basic protections are configured by default. When you import LDIF with userPassword values, OpenDJ directory server applies a one-way hash to the values before storing them. When a user provides a password value during a bind, for example, the server hashes the value provided and compares it with the stored value. This prevents even the directory manager from recovering the plain text value of a user's password:

$ldapsearch \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN dc=example,dc=com \ uid=bjensen \ userpassword dn: uid=bjensen,ou=People,dc=example,dc=com userpassword: {SSHA}QWAtw8ch/9850HNFRRqLNMIQc1YhxCnOoGmk1g==  In addition, users can change their passwords provided that you have granted them access to do so. OpenDJ directory server uses the userPassword attribute to store passwords by default, rather than the authPassword attribute, which is designed to store passwords hashed by the client application. 10.1.2. Subentry-Based Password Policies You manage subentry password policies by adding the subentries alongside the user data. OpenDJ directory server can therefore replicate subentry password policies. The advantages are that you only need to add them once, and that administrators of user data can edit subentry password policies without having directory administrator access. Subentry password policies support the Internet-Draft Password Policy for LDAP Directories (version 09). A subentry password policy effectively overrides settings in the default password policy defined in the OpenDJ configuration. Settings not supported or not included in the subentry password policy are inherited from the default password policy. Table 10.1, "Subentry Policy Attributes vs. Server Properties" lists Internet-Draft password policy attributes that override the default password policy when you set them in the subentry: Table 10.1. Subentry Policy Attributes vs. Server Properties Internet-Draft Policy AttributeOverrides This Server Policy Property pwdAllowUserChangeallow-user-password-changes pwdMustChangeforce-change-on-reset pwdGraceAuthNLimitgrace-login-count pwdLockoutDurationlockout-duration pwdMaxFailurelockout-failure-count pwdFailureCountIntervallockout-failure-expiration-interval pwdMaxAgemax-password-age pwdMinAgemin-password-age pwdAttributepassword-attribute pwdSafeModifypassword-change-requires-current-password pwdExpireWarningpassword-expiration-warning-interval pwdInHistorypassword-history-count The following Internet-Draft password policy attributes are not taken into account by OpenDJ directory server: • pwdCheckQuality, because OpenDJ directory server has password validators. Set password validators to use in the default password policy, for example. • pwdMinLength, because this is handled by the length-based password validator. Configure this validator as part of the default password policy, for example. • pwdLockout, because OpenDJ directory server can deduce whether lockout is configured based on the values of other lockout-related password policy attributes. Values of the following properties are inherited from the default password policy for Internet-Draft based password policies: • account-status-notification-handlers • allow-expired-password-changes • allow-multiple-password-values • allow-pre-encoded-passwords • default-password-storage-schemes • deprecated-password-storage-schemes • expire-passwords-without-warning • force-change-on-add • idle-lockout-interval • last-login-time-attribute • last-login-time-format • max-password-reset-age • password-generator • password-history-duration • password-validators • previous-last-login-time-formats • require-change-by-time • require-secure-authentication • require-secure-password-changes • skip-validation-for-administrators • state-update-failure-policy If you would rather specify password validators for your policy, you can configure password validators for a subentry password policy by adding the auxiliary object class pwdValidatorPolicy and setting the multi-valued attribute, ds-cfg-password-validator, to the DNs of the password validator configuration entries. The following example shows a subentry password policy that references two password validator configuration entries. The Character Set password validator determines whether a proposed password is acceptable by checking whether it contains a sufficient number of characters from one or more user-defined character sets and ranges. The length-based password validator determines whether a proposed password is acceptable based on whether the number of characters it contains falls within an acceptable range of values. Both are enabled in the default OpenDJ directory server configuration: dn: cn=Subentry Password Policy with Validators,dc=example,dc=com objectClass: top objectClass: subentry objectClass: pwdPolicy objectClass: pwdValidatorPolicy cn: Subentry Password Policy with Validators pwdAttribute: userPassword pwdLockout: TRUE pwdMaxFailure: 3 pwdFailureCountInterval: 300 pwdLockoutDuration: 300 pwdAllowUserChange: TRUE pwdSafeModify: TRUE ds-cfg-password-validator: cn=Character Set,cn=Password Validators,cn=config ds-cfg-password-validator: cn=Length-Based Password Validator, cn=Password Validators,cn=config subtreeSpecification: {base "ou=people", specificationFilter "(isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)" }  If a referenced password validator cannot be found, then OpenDJ directory server logs an error message when the password policy is invoked. This can occur, for example, when a subentry password policy is replicated to a directory server where the password validator is not (yet) configured. In that case, when a user attempts to change their password, the server fails to find the referenced password validator. 10.1.3. Which Password Policy Applies The password policy that applies to a user is identified by the operational attribute, pwdPolicySubentry: $ ldapsearch \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com uid=bjensen \
pwdPolicySubentry
dn: uid=bjensen,ou=People,dc=example,dc=com


The default global access control instructions prevent this operational attribute from being visible to normal users, so examples show it being accessed by the Directory Manager user.

10.2. Configuring Password Policies

You configure server-based password policies by using the dsconfig command. Notice that server-based password policies are part of the server configuration, and therefore not replicated. Alternatively, you can configure a subset of password policy features by using subentry-based password policies that are stored with the replicated server data. This section covers both server-based and subentry-based password policies.

Procedure 10.1. To Adjust the Default Password Policy

You can reconfigure the default password policy, for example, to enforce password expiration, check that passwords do not match dictionary words, and prevent password reuse. The default policy is a server-based password policy.

1. Enable the appropriate password validator:

$dsconfig \ set-password-validator-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --validator-name Dictionary \ --set enabled:true \ --set check-substrings:true \ --set min-substring-length:4 \ --trustAll \ --no-prompt  2. Apply the changes to the default password policy: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "Default Password Policy" \
--trustAll \
--no-prompt

3. Check your work:

$dsconfig \ get-password-policy-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --policy-name "Default Password Policy" Property : Value(s) ------------------------------------------:-------------------------- account-status-notification-handler : - allow-expired-password-changes : false allow-user-password-changes : true default-password-storage-scheme : Salted SHA-1 deprecated-password-storage-scheme : - expire-passwords-without-warning : false force-change-on-add : false force-change-on-reset : false grace-login-count : 0 idle-lockout-interval : 0 s last-login-time-attribute : - last-login-time-format : - lockout-duration : 0 s lockout-failure-count : 0 lockout-failure-expiration-interval : 0 s max-password-age : 12 w 6 d max-password-reset-age : 0 s min-password-age : 4 w password-attribute : userpassword password-change-requires-current-password : false password-expiration-warning-interval : 5 d password-generator : Random Password Generator password-history-count : 7 password-history-duration : 0 s password-validator : Dictionary previous-last-login-time-format : - require-change-by-time : - require-secure-authentication : false require-secure-password-changes : false  Procedure 10.2. To Create a Server-Based Password Policy You can add a password policy, for example, for new users who have not yet used their credentials to bind. 1. Create the new password policy: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "New Account Password Policy" \
--set default-password-storage-scheme:"Salted SHA-1" \
--trustAll \
--no-prompt

2. Check your work:

$dsconfig \ get-password-policy-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --policy-name "New Account Password Policy" Property : Value(s) ------------------------------------------:------------- account-status-notification-handler : - allow-expired-password-changes : false allow-user-password-changes : true default-password-storage-scheme : Salted SHA-1 deprecated-password-storage-scheme : - expire-passwords-without-warning : false force-change-on-add : true force-change-on-reset : false grace-login-count : 0 idle-lockout-interval : 0 s last-login-time-attribute : - last-login-time-format : - lockout-duration : 0 s lockout-failure-count : 0 lockout-failure-expiration-interval : 0 s max-password-age : 0 s max-password-reset-age : 0 s min-password-age : 0 s password-attribute : userpassword password-change-requires-current-password : false password-expiration-warning-interval : 5 d password-generator : - password-history-count : 0 password-history-duration : 0 s password-validator : - previous-last-login-time-format : - require-change-by-time : - require-secure-authentication : false require-secure-password-changes : false  If you use a password policy like this, then you will want to change the user's policy again when the new user successfully updates the password. For instructions on assigning a server-based password policy, see Procedure 10.4, "To Assign a Password Policy to a User". Procedure 10.3. To Create a Subentry-Based Password Policy You can add a subentry to configure a password policy that applies to Directory Administrators. 1. Create the entry that specifies the password policy: $ cat /path/to/subentry-pwp.ldif
dn: cn=Subentry Password Policy,dc=example,dc=com
objectClass: top
objectClass: subentry
objectClass: pwdPolicy
cn: Subentry Password Policy
pwdLockout: TRUE
pwdMaxFailure: 3
pwdFailureCountInterval: 300
pwdLockoutDuration: 300
pwdAllowUserChange: TRUE
pwdSafeModify: TRUE
subtreeSpecification: {base "ou=people", specificationFilter

2. Add the policy to the directory:

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --defaultAdd \ --filename /path/to/subentry-pwp.ldif Processing ADD request for cn=Subentry Password Policy,dc=example,dc=com ADD operation successful for DN cn=Subentry Password Policy,dc=example,dc=com  3. Check that the policy applies as specified. In this example, the policy should apply to a Directory Administrator, while a normal user has the default password policy. Here, Kirsten Vaughan is a member of the Directory Administrators group, and Babs Jensen is not a member: $ ldapsearch \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com \
uid=kvaughan \
pwdPolicySubentry
dn: uid=kvaughan,ou=People,dc=example,dc=com
pwdPolicySubentry: cn=Subentry Password Policy,dc=example,dc=com

$ldapsearch \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN dc=example,dc=com \ uid=bjensen \ pwdPolicySubentry dn: uid=bjensen,ou=People,dc=example,dc=com pwdPolicySubentry: cn=Default Password Policy,cn=Password Policies,cn=config  10.3. Assigning Password Policies You assign subentry-based password policies for a subtree of the DIT by adding the policy to an LDAP subentry whose immediate superior is the root of the subtree. In other words, you can add the subentry-based password policy under ou=People,dc=example,dc=com to have it apply to all entries under ou=People,dc=example,dc=com. You can also use the capabilities of LDAP subentries to refine the scope of application. You assign server-based password policies by using the ds-pwp-password-policy-dn attribute. Figure 10.1, "Server-Based and Subentry Password Policies" compares the types of password policy. Procedure 10.4. To Assign a Password Policy to a User 1. Prevent users from selecting their own password policy: $ cat protectpwp.ldif
dn: ou=People,dc=example,dc=com
changetype: modify
aci: (target ="ldap:///uid=*,ou=People,dc=example,dc=com")(targetattr =
"ds-pwp-password-policy-dn")(version 3.0;acl "Cannot choose own pass
word policy";deny (write)(userdn = "ldap:///self");)

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --filename protectpwp.ldif Processing MODIFY request for ou=People,dc=example,dc=com MODIFY operation successful for DN ou=People,dc=example,dc=com  2. Update the user's ds-pwp-password-policy-dn attribute: $ cat newuser.ldif
dn: uid=newuser,ou=People,dc=example,dc=com
uid: newuser
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: top
cn: New User
sn: User
ou: People
mail: newuser@example.com
cn=config

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --defaultAdd \ --filename newuser.ldif Processing ADD request for uid=newuser,ou=People,dc=example,dc=com ADD operation successful for DN uid=newuser,ou=People,dc=example,dc=com  3. Check your work: $ ldapsearch \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com \
uid=newuser \
pwdPolicySubentry
dn: uid=newuser,ou=People,dc=example,dc=com

Procedure 10.5. To Assign a Password Policy to a Group

You can use a collective attribute to assign a password policy.

1. Create a subentry defining the collective attribute that sets the ds-pwp-password-policy-dn attribute for group members' entries:

$cat pwp-coll.ldif dn: cn=Password Policy for Dir Admins,dc=example,dc=com objectClass: collectiveAttributeSubentry objectClass: extensibleObject objectClass: subentry objectClass: top cn: Password Policy for Dir Admins ds-pwp-password-policy-dn;collective: cn=Root Password Policy,cn=Pass word Policies,cn=config subtreeSpecification: { base "ou=People", specificationFilter "(isMemberOf= cn=Directory Administrators,ou=Groups,dc=example,dc=com)"}$ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--filename pwp-coll.ldif
ADD operation successful for DN cn=Password Policy for Dir
Admins,dc=example,dc=com
2. Check your work:

$ldapsearch \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN dc=example,dc=com \ uid=kvaughan \ pwdPolicySubentry dn: uid=kvaughan,ou=People,dc=example,dc=com pwdPolicySubentry: cn=Root Password Policy,cn=Password Policies,cn=config  Procedure 10.6. To Assign Password Policy for an Entire Branch A password policy subentry password policy to assign the policy to the entries under a base DN. 1. Create a password policy with a subtreeSpecification to assign the policy to all entries under a base DN. The following example creates a password policy for entries under ou=People,dc=example,dc=com: $ cat people-pwp.ldif
dn: cn=People Password Policy,dc=example,dc=com
objectClass: top
objectClass: subentry
objectClass: pwdPolicy
cn: People Password Policy
pwdLockout: TRUE
pwdMaxFailure: 3
pwdFailureCountInterval: 300
pwdLockoutDuration: 300
pwdAllowUserChange: TRUE
pwdSafeModify: TRUE
subtreeSpecification: { base "ou=people" }

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --defaultAdd \ --filename people-pwp.ldif Processing ADD request for cn=People Password Policy,dc=example,dc=com ADD operation successful for DN cn=People Password Policy,dc=example,dc=com  Notice the subtree specification used to assign the policy, { base "ou=people" }. You can relax the subtree specification value to {} to apply the password policy to all sibling entries (all entries under dc=example,dc=com), or further restrict the subtree specification by adding a specificationFilter. See Section 5.2, "Collective Attributes" in the OpenDJ Directory Server Developer's Guide for more information. 2. Check your work: $ ldapsearch \
--port 1389 \
--bindDN "cn=Directory Manager" \
--baseDN dc=example,dc=com \
"(uid=alutz)" \
pwdPolicySubentry
dn: uid=alutz,ou=People,dc=example,dc=com
pwdPolicySubentry: cn=People Password Policy,dc=example,dc=com


If everything is correctly configured, then the password policy should be assigned to users whose entries are under ou=People,dc=example,dc=com.

10.4. Configuring Password Generation

Password generators are used by OpenDJ directory server during the LDAP Password Modify extended operation to construct a new password for the user. In other words, a directory administrator resetting a user's password can have OpenDJ directory server generate the new password by using the ldappasswordmodify command, described in ldappasswordmodify(1) in the OpenDJ Reference:

$ldappasswordmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --authzID "u:bjensen" The LDAP password modify operation was successful Generated Password: eak77qdi  The default password policy shown in Procedure 10.1, "To Adjust the Default Password Policy" uses the Random Password Generator, described in "Random Password Generator" in the OpenDJ Reference: $ dsconfig \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--policy-name "Default Password Policy" \
Property           : Value(s)
-------------------:--------------------------

$dsconfig \ get-password-generator-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --generator-name "Random Password Generator" \ --property password-generator Property : Value(s) -----------------------:----------------------------------------------------- enabled : true password-character-set : alpha:abcdefghijklmnopqrstuvwxyz, numeric:0123456789 password-format : "alpha:3,numeric:2,alpha:3"  Notice that the default configuration for the Random Password Generator defines two password-character-set values, and then uses those definitions in the password-format so that generated passwords have eight characters: three from the alpha set, followed by two from the numeric set, followed by three from the alpha set. The password-character-set name must be ASCII. To set the password generator that OpenDJ directory server employs when constructing a new password for a user, set the password-generator property for the password policy that applies to the user. The following example does not change the password policy, but instead changes the Random Password Generator configuration, and then demonstrates a password being generated upon reset: $ dsconfig \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--generator-name "Random Password Generator" \
--add password-character-set:punct:,./\!@#\$%^&*:\;[]\"\'+=-_~\\ \ --set \ password-format:alpha:3,punct:1,numeric:2,punct:2,numeric:3,alpha:3,punct:2 \ --no-prompt$ ldappasswordmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--authzID "u:bjensen"
The LDAP password modify operation was successful
Generated Password:  pld^06:)529HTq$'  If you also set up a password validator in the password policy as shown in Procedure 10.1, "To Adjust the Default Password Policy" and further described in Section 10.6, "Configuring Password Validation", make sure the generated passwords are acceptable to the validator. 10.5. Configuring Password Storage Password storage schemes, described in dsconfig create-password-storage-scheme(1) in the OpenDJ Reference, encode new passwords provided by users so that they are stored in an encoded manner. This makes it difficult or impossible to determine the cleartext passwords from the encoded values. Password storage schemes also determine whether a cleartext password provided by a client matches the encoded value stored by the server. OpenDJ directory server offers a variety of reversible and one-way password storage schemes. Some schemes make it easy to recover the cleartext password, whereas others aim to make it computationally hard to do so: $ dsconfig \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--trustAll

Password Storage Scheme : Type          : enabled
------------------------:---------------:--------
3DES                    : triple-des    : true
AES                     : aes           : true
Base64                  : base64        : true
Bcrypt                  : bcrypt        : true
Blowfish                : blowfish      : true
Clear                   : clear         : true
CRYPT                   : crypt         : true
MD5                     : md5           : true
PBKDF2                  : pbkdf2        : true
PKCS5S2                 : pkcs5s2       : true
RC4                     : rc4           : true
Salted MD5              : salted-md5    : true
Salted SHA-1            : salted-sha1   : true
Salted SHA-256          : salted-sha256 : true
Salted SHA-384          : salted-sha384 : true
Salted SHA-512          : salted-sha512 : true
SHA-1                   : sha1          : true


As shown in Procedure 10.1, "To Adjust the Default Password Policy", the default password storage scheme for users is Salted SHA-1. When you add users or import user entries with userPassword values in cleartext, OpenDJ directory server hashes them with the default password storage scheme. Root DN users have a different password policy by default, shown in Procedure 10.5, "To Assign a Password Policy to a Group". The Root Password Policy uses Salted SHA-512 by default.

The password storage schemes listed in Table 10.2, "Additional Password Storage Scheme Settings" have additional configuration settings.

Table 10.2. Additional Password Storage Scheme Settings
SchemeSettingDescription

Bcrypt

bcrypt-cost

The cost parameter specifies a key expansion iteration count as a power of two.

A default value of 12 (212 iterations) is considered in 2016 as a reasonable balance between responsiveness and security for regular users.

Crypt

crypt-password-storage-encryption-algorithm

Specifies the crypt algorithm to use to encrypt new passwords.

The following values are supported:

unix

The password is encrypted with the weak Unix crypt algorithm.

This is the default setting.

md5

The password is encrypted with the BSD MD5 algorithm and has a $1$ prefix.

sha256

The password is encrypted with the SHA256 algorithm and has a $5$ prefix.

sha512

The password is encrypted with the SHA512 algorithm and has a $6$ prefix.

PBKDF2

pbkdf2-iterations

The number of algorithm iterations. NIST recommends at least 1000.

The default is 10000.

You change the default password policy storage scheme for users by changing the applicable password policy, as shown in the following example:

$dsconfig \ set-password-policy-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --policy-name "Default Password Policy" \ --set default-password-storage-scheme:pbkdf2 \ --no-prompt  Notice that the change in default password storage scheme does not cause OpenDJ directory server to update any stored password values. By default, the server only stores a password with the new storage scheme the next time that the password is changed. OpenDJ directory server prefixes passwords with the scheme used to encode them, which means it is straightforward to see which password storage scheme is used. After the default password storage scheme is changed to PBKDF2, old user passwords remain encoded with Salted SHA-1: $ ldapsearch \
--port 1389 \
--bindDN uid=bjensen,ou=people,dc=example,dc=com \
--baseDN dc=example,dc=com \
dn: uid=bjensen,ou=People,dc=example,dc=com


When the password is changed, the new default password storage scheme takes effect, as shown in the following example:

$ldappasswordmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --authzID "u:bjensen" \ --newPassword changeit The LDAP password modify operation was successful$ ldapsearch \
--port 1389 \
--bindDN uid=bjensen,ou=people,dc=example,dc=com \
--baseDN dc=example,dc=com \
dn: uid=bjensen,ou=People,dc=example,dc=com


When you change the password storage scheme for users, realize that the user passwords must change in order for OpenDJ directory server to encode them with the chosen storage scheme. If you are changing the storage scheme because the old scheme was too weak, then you no doubt want users to change their passwords anyway.

If, however, the storage scheme change is not related to vulnerability, you can use the deprecated-password-storage-scheme property of the password policy to have OpenDJ directory server store the password in the new format after successful authentication. This makes it possible to do password migration for active users without forcing users to change their passwords:

$ldapsearch \ --port 1389 \ --bindDN uid=kvaughan,ou=people,dc=example,dc=com \ --bindPassword bribery \ --baseDN dc=example,dc=com \ "(uid=kvaughan)" userPassword dn: uid=kvaughan,ou=People,dc=example,dc=com userPassword: {SSHA}hDgK44F2GhIIZj913b+29Ak7phb9oU3Lz4ogkg==$ dsconfig \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--policy-name "Default Password Policy" \
--set deprecated-password-storage-scheme:"Salted SHA-1" \
--no-prompt

$ldapsearch \ --port 1389 \ --bindDN uid=kvaughan,ou=people,dc=example,dc=com \ --bindPassword bribery \ --baseDN dc=example,dc=com \ "(uid=kvaughan)" userPassword dn: uid=kvaughan,ou=People,dc=example,dc=com userPassword: {PBKDF2}10000:L4dCYqSsNnf47YZ3a6aC8K2E3DChhHHhpcoUzg==  Notice that with deprecated-password-storage-scheme set appropriately, Kirsten Vaughan's password was hashed again after she authenticated successfully. 10.6. Configuring Password Validation Password validators, described in dsconfig create-password-validator(1) in the OpenDJ Reference, are responsible for determining whether a proposed password is acceptable for use. Validators can run checks like ensuring that the password meets minimum length requirements, that it has an appropriate range of characters, or that it is not in the history of recently used passwords. OpenDJ directory server provides a variety of password validators: $ dsconfig \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \

Password Validator                  : Type                : enabled
------------------------------------:---------------------:--------
Attribute Value                     : attribute-value     : true
Character Set                       : character-set       : true
Dictionary                          : dictionary          : false
Length-Based Password Validator     : length-based        : true
Repeated Characters                 : repeated-characters : true
Similarity-Based Password Validator : similarity-based    : true
Unique Characters                   : unique-characters   : true


The password policy for a user specifies the set of password validators that should be used whenever that user provides a new password. By default, no password validators are configured. You can see an example setting the Default Password Policy to use the Dictionary validator in Procedure 10.1, "To Adjust the Default Password Policy". The following example shows how to set up a custom password validator and assign it to the default password policy.

The custom password validator ensures passwords meet at least three of the following four criteria. Passwords are composed of the following:

• English lowercase characters (a through z)

• English uppercase characters (A through Z)

• Base 10 digits (0 through 9)

• Non-alphabetic characters (for example, !, $, #, %) Notice how the character-set values are constructed. The initial 0: means the set is optional, whereas 1: means the set is required: $ dsconfig \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--validator-name "Custom Character Set Password Validator" \
--set allow-unclassified-characters:true \
--set enabled:true \
--set character-set:0:abcdefghijklmnopqrstuvwxyz \
--set character-set:0:ABCDEFGHIJKLMNOPQRSTUVWXYZ \
--set character-set:0:0123456789 \
--set character-set:0:!\"#\$%&\'*+,-./:\;\\<=\>?@[\\]^_\{\|}~ \ --set min-character-sets:3 \ --type character-set \ --no-prompt$ dsconfig \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--policy-name "Default Password Policy" \
--set password-validator:"Custom Character Set Password Validator" \
--no-prompt

$ldappasswordmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --authzID "u:bjensen" \ --newPassword '!ABcd$%^'


In the preceding example, the character set of ASCII punctuation, !\"#\$%&\'*+,-./:\;\\<=\>?@[\\]^_\{\|}~, is hard to read because of all of the escape characters. It can be easier to enter sequences like that by using dsconfig in interactive mode, and letting it do the escaping for you. You can also use the --commandFilePath {path} option to save the result of your interactive session to a file for later use in scripts. An attempt to set an invalid password fails as shown in the following example: $ ldappasswordmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--authzID "u:bjensen" \
The LDAP password modify operation failed with result code 19
Error Message:  The provided new password failed the validation checks defined
in the server:  The provided password did not contain characters from at least
3 of the following character sets or ranges: 'ABCDEFGHIJKLMNOPQRSTUVWXYZ',
'!"#$%&'()*+,-./:;<=\>?@[\]^_{|}~', '0123456789', 'abcdefghijklmnopqrstuvwxyz'  Validation does not affect existing passwords, but only takes effect when the password is updated. You can reference password validators from subentry password policies. See Section 10.1.2, "Subentry-Based Password Policies" for an example. 10.7. Sample Password Policies The sample password policies in this section demonstrate OpenDJ server-based password policies for several common cases: Example 10.1. Enforce Regular Password Changes The following commands configure an OpenDJ server-based password policy that sets age limits on passwords, requiring that they change periodically. It also sets the number of passwords to keep in the password history of the entry, thereby preventing users from reusing the same password on consecutive changes: $ dsconfig  \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "Enforce Regular Password Changes" \
--set default-password-storage-scheme:"Salted SHA-1" \
--trustAll \
--no-prompt


See also Section 10.3, "Assigning Password Policies" for instructions on using the policy.

Example 10.2. Track Last Login Time

The following commands configure an OpenDJ server-based password policy that keeps track of the last successful login.

First, set up an attribute to which OpenDJ directory server can write a timestamp value on successful login. For additional information also see Example 2.7, "Search: Listing Active Accounts" in the OpenDJ Directory Server Developer's Guide:

$ldapmodify \ --port 1389 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password dn: cn=schema changetype: modify add: attributeTypes attributeTypes: ( lastLoginTime-oid NAME 'lastLoginTime' DESC 'Last time the user logged in' EQUALITY generalizedTimeMatch ORDERING generalizedTimeOrderingMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation X-ORIGIN 'OpenDJ example documentation' ) Processing MODIFY request for cn=schema MODIFY operation successful for DN cn=schema  Next, create the password policy that causes OpenDJ directory server to write the timestamp to the attribute on successful login: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "Track Last Login Time" \
--set default-password-storage-scheme:"Salted SHA-1" \
--trustAll \
--no-prompt


See also Section 10.3, "Assigning Password Policies" for instructions on using the policy.

Example 10.3. Deprecate a Password Storage Scheme

The following commands configure an OpenDJ server-based password policy that you can use when deprecating a password storage scheme. This policy uses elements from Example 10.1, "Enforce Regular Password Changes", as OpenDJ directory server only employs the new password storage scheme to hash or to encrypt passwords when a password changes:

$dsconfig \ create-password-policy \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --policy-name "Deprecate a Password Storage Scheme" \ --type password-policy \ --set deprecated-password-storage-scheme:Crypt \ --set default-password-storage-scheme:"Salted SHA-1" \ --set password-attribute:userPassword \ --set max-password-age:13w \ --set min-password-age:4w \ --set password-history-count:7 \ --trustAll \ --no-prompt  See also Section 10.3, "Assigning Password Policies" for instructions on using the policy. Example 10.4. Lock Idle Accounts The following commands configure an OpenDJ server-based password policy that locks idle accounts. This policy extends the example from Example 10.2, "Track Last Login Time" as OpenDJ directory server must track last successful login time in order to calculate how long the account has been idle. You must first add the lastLoginTime attribute type in order for OpenDJ directory server to accept this new password policy: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "Lock Idle Accounts" \
--set default-password-storage-scheme:"Salted SHA-1" \
--set idle-lockout-interval:13w \
--trustAll \
--no-prompt


Example 10.5. Allow Grace Log In to Change Expired Password

The following commands configure an OpenDJ server-based password policy that allows users to log in after their password has expired in order to choose a new password:

$dsconfig \ create-password-policy \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --policy-name "Allow Grace Login" \ --type password-policy \ --set default-password-storage-scheme:"Salted SHA-1" \ --set password-attribute:userPassword \ --set grace-login-count:2 \ --trustAll \ --no-prompt  See also Section 10.3, "Assigning Password Policies" for instructions on using the policy. Example 10.6. Require Password Change on Add or Reset The following commands configure an OpenDJ server-based password policy that requires new users to change their password after logging in for the first time, and also requires users to change their password after their password is reset: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "Require Password Change on Add or Reset" \
--set default-password-storage-scheme:"Salted SHA-1" \
--set force-change-on-reset:true \
--trustAll \
--no-prompt


See also Section 10.3, "Assigning Password Policies" for instructions on using the policy.

Chapter 11. Implementing Account Lockout and Notification

This chapter covers configuration of account lockout and account status notification. In this chapter you will learn to:

• Configure password policies to manage account lockout automatically

• Manage lockout with the manage-account command

• Set up email notification of account status

OpenDJ directory server supports automatic account lockout. The aim of account lockout is not to punish users who mistype their passwords, but instead to protect the directory against attacks in which the attacker attempts to guess a user password, repeatedly attempting to bind until success is achieved.

Account lockout disables a user account after a specified number of successive authentication failures. When you implement account lockout, you can opt to have OpenDJ directory server unlock the account after a specified interval, or you can leave the account locked until the password is reset.

Note

You configure account lockout as part of password policy. OpenDJ locks an account after the specified number of consecutive authentication failures. Account lockout is not transactional across a replication topology. Under normal circumstances, replication propagates lockout quickly. If replication is ever delayed, an attacker with direct access to multiple replicas could try to authenticate up to the specified number of times on each replica before being locked out on all replicas.

This chapter shows you how to set up account lockout policies by using the dsconfig command, described in dsconfig(1) in the OpenDJ Reference, and how to intervene manually to lock and unlock accounts by using the manage-account command, described in manage-account(1) in the OpenDJ Reference.

11.1. Configuring Account Lockout

Account lockout is configured as part of password policy. This section demonstrates configuring account lockout as part of the default password policy. Users are allowed three consecutive failures before being locked out for five minutes. Failures themselves also expire after five minutes.

Change the default password policy to activate lockout using the dsconfig command. As the password policy is part of the server configuration, you must manually apply the changes to each replica in a replication topology:

$dsconfig \ set-password-policy-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --policy-name "Default Password Policy" \ --set lockout-failure-count:3 \ --set lockout-duration:5m \ --set lockout-failure-expiration-interval:5m \ --trustAll \ --no-prompt  Users having the default password policy are then locked out after three failed attempts in succession: $ ldapsearch \
--port 1389 \
--bindDN "uid=bjensen,ou=people,dc=example,dc=com" \
--baseDN dc=example,dc=com \
uid=bjensen \
mail
dn: uid=bjensen,ou=People,dc=example,dc=com
mail: bjensen@example.com

$ldapsearch \ --port 1389 \ --bindDN "uid=bjensen,ou=people,dc=example,dc=com" \ --bindPassword fatfngrs \ --baseDN dc=example,dc=com \ uid=bjensen \ mail The simple bind attempt failed Result Code: 49 (Invalid Credentials)$ ldapsearch \
--port 1389 \
--bindDN "uid=bjensen,ou=people,dc=example,dc=com" \
--baseDN dc=example,dc=com \
uid=bjensen \
mail
The simple bind attempt failed
Result Code:  49 (Invalid Credentials)

$ldapsearch \ --port 1389 \ --bindDN "uid=bjensen,ou=people,dc=example,dc=com" \ --bindPassword fatfngrs \ --baseDN dc=example,dc=com \ uid=bjensen \ mail The simple bind attempt failed Result Code: 49 (Invalid Credentials)$ ldapsearch \
--port 1389 \
--bindDN "uid=bjensen,ou=people,dc=example,dc=com" \
--baseDN dc=example,dc=com \
uid=bjensen \
mail
The simple bind attempt failed
Result Code:  49 (Invalid Credentials)


11.2. Managing Accounts Manually

This section covers disabling and enabling accounts by using the manage-account command. Password reset is covered in the chapter on performing LDAP operations.

For the following examples, the directory admin user, Kirsten Vaughan, has ds-privilege-name: password-reset, and the following ACI on ou=People,dc=example,dc=com:

(target="ldap:///ou=People,dc=example,dc=com") (targetattr ="*||+")(
version 3.0;acl "Admins can run amok"; allow(all) groupdn =

Procedure 11.1. To Disable an Account
• Set the account status to disabled with the manage-account command:

$manage-account \ set-account-is-disabled \ --port 4444 \ --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \ --bindPassword bribery \ --operationValue true \ --targetDN uid=bjensen,ou=people,dc=example,dc=com \ --trustAll Account Is Disabled: true  Procedure 11.2. To Activate a Disabled Account • Clear the disabled status using the manage-account command: $ manage-account \
clear-account-is-disabled \
--port 4444 \
--bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \
--targetDN uid=bjensen,ou=people,dc=example,dc=com \
--trustAll
Account Is Disabled:  false


11.3. Managing Account Status Notification

OpenDJ can send mail about account status changes. OpenDJ needs an SMTP server to send messages, and needs templates for the mail it sends. By default, message templates are in English, under /path/to/opendj/config/messages/.

OpenDJ generates notifications only when OpenDJ writes to an entry or evaluates a user entry for authentication. OpenDJ generates account enabled and account disabled notifications when the user account is enabled or disabled with the manage-account command, which writes to the entry. OpenDJ generates password expiration notifications when a user tries to bind.

Procedure 11.3. To Mail Users About Account Status

The following steps demonstrate how to set up notifications. Whether OpenDJ sends notifications depends on the settings in the password policy, and on account activity as described above.

1. Identify the SMTP server to which OpenDJ sends messages:

$dsconfig \ set-global-configuration-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set smtp-server:smtp.example.com:25 \ --trustAll \ --no-prompt  2. Set up OpenDJ to be able to mail users about account status. The following example configures OpenDJ to send text-format mail messages: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--handler-name "SMTP Handler" \
--set enabled:true \
--trustAll \
--no-prompt


Notice that OpenDJ finds the user's mail address on the attribute on the user's entry, specified by email-address-attribute-type.

You can also configure the message-subject and message-template-file properties. Try interactive mode if you plan to do so.

You find templates for messages by default under the config/messages directory. You can edit the templates to suit your purposes.

If you edit the templates to send HTML rather than text messages, then set the advanced property, send-email-as-html, as shown in the following example:

$dsconfig \ set-account-status-notification-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "SMTP Handler" \ --set enabled:true \ --set send-email-as-html:true \ --trustAll \ --no-prompt  3. Adjust applicable password policies to use the account status notification handler you configured: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--policy-name "Default Password Policy" \
--set account-status-notification-handler:"SMTP Handler" \
--trustAll \
--no-prompt


When editing the config/messages templates to suit your purposes, you can use the following tokens to have OpenDJ update the message text dynamically.

%%notification-type%%

This token is replaced with the name of the account status notification type for the notification.

%%notification-message%%

This token is replaced with the message for the account status notification.

%%notification-user-dn%%

This token is replaced with the string representation of the DN for the user who is the target of the account status notification.

%%notification-user-attr:attrname%%

This token is replaced with the value of the attribute specified by attrname from the user's entry. If the specified attribute has multiple values, then OpenDJ uses the first value encountered. If the specified attribute does not have any values, then OpenDJ replaces it with an emtpy string.

%%notification-property:propname%%

This token is replaced with the value of the specified notification property from the account status notification. If the specified property has multiple values, then OpenDJ uses the first value encountered. If the specified property does not have any values, then OpenDJ replaces it with an empty string. Valid propname values include the following:

• account-unlock-time

• new-password

• old-password

• password-expiration-time

• password-policy-dn

• seconds-until-expiration

• seconds-until-unlock

• time-until-expiration

• time-until-unlock

Chapter 12. Setting Resource Limits

This chapter shows you how to set resource limits that prevent directory clients from using an unfair share of system resources. In this chapter you will learn to:

• Limit the resources used when a user searches the directory

• Limit how long connections can remain idle before they are dropped

• Limit the size of directory server requests

12.1. Limiting Search Resources

Well-written directory client applications limit the scope of their searches with filters that narrow the number of results returned. By default, OpenDJ only allows users with appropriate privileges to perform unindexed searches.

You can further adjust additional limits on search operations, such as the following:

• The lookthrough limit defines the maximum number of candidate entries OpenDJ considers when processing a search.

The default lookthrough limit, which is set by using the global server property lookthrough-limit, is 5000.

You can override the limit for a particular user by changing the operational attribute, ds-rlim-lookthrough-limit, on the user's entry.

• The size limit sets the maximum number of entries returned for a search.

The default size limit, which is set by using the global server property size-limit, is 1000.

You can override the limit for a particular user by changing the operational attribute, ds-rlim-size-limit, on the user's entry.

• The time limit defines the maximum processing time OpenDJ devotes to a search operation.

The default time limit, which is set by using the global server property time-limit, is 1 minute.

You can override the limit for a particular user by changing the operational attribute, ds-rlim-time-limit, on the user's entry. Times for ds-rlim-time-limit are expressed in seconds.

• The idle time limit defines how long OpenDJ allows idle connections to remain open.

No default idle time limit is set. You can set an idle time limit by using the global server property idle-time-limit.

You can override the limit for a particular user by changing the operational attribute, ds-rlim-idle-time-limit, on the user's entry. Times for ds-rlim-idle-time-limit are expressed in seconds.

• The maximum number of persistent searches can be set by using the global server property max-psearches.

Procedure 12.1. To Set Search Limits For a User
• Change the user entry to set the limits to override:

$cat limit.ldif dn: uid=bjensen,ou=People,dc=example,dc=com changetype: modify add: ds-rlim-size-limit ds-rlim-size-limit: 10$ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--filename limit.ldif
Processing MODIFY request for uid=bjensen,ou=People,dc=example,dc=com
MODIFY operation successful for DN uid=bjensen,ou=People,dc=example,dc=com


Now when Babs Jensen performs a search returning more than 10 entries, she sees the following message:

Result Code:  4 (Size Limit Exceeded)
Additional Information:  This search operation has sent the maximum of
10 entries to the client

Procedure 12.2. To Set Search Limits For a Group
1. Create an LDAP subentry to specify the limits using collective attributes:

$cat grouplim.ldif dn: cn=Remove Administrator Search Limits,dc=example,dc=com objectClass: collectiveAttributeSubentry objectClass: extensibleObject objectClass: subentry objectClass: top cn: Remove Administrator Search Limits ds-rlim-lookthrough-limit;collective: 0 ds-rlim-size-limit;collective: 0 ds-rlim-time-limit;collective: 0 subtreeSpecification: {base "ou=people", specificationFilter " (isMemberOf=cn=Directory Administrators,ou=Groups,dc=example,dc=com)" }$ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--filename grouplim.ldif
Processing ADD request for
cn=Remove Administrator Search Limits,dc=example,dc=com
ADD operation successful for DN
cn=Remove Administrator Search Limits,dc=example,dc=com

2. Check the results:

$ldapsearch --port 1389 --baseDN dc=example,dc=com uid=kvaughan +|grep ds-rlim ds-rlim-lookthrough-limit: 0 ds-rlim-time-limit: 0 ds-rlim-size-limit: 0  12.2. Limiting Idle Time If you have applications that leave connections open for long periods, OpenDJ can end up devoting resources to maintaining connections that are no longer used. If your network does not drop such connections eventually, you can configure OpenDJ to drop them by setting the global configuration property, idle-time-limit. By default, no idle time limit is set. If your network load balancer is configured to drop connections that have been idle for some time, make sure you set the OpenDJ idle time limit to a lower value than the idle time limit for the load balancer. This helps to ensure that idle connections are shut down in orderly fashion. Setting the OpenDJ limit lower than the load balancer limit is particularly useful with load balancers that drop idle connections without cleanly closing the connection and notifying the client and server. Note OpenDJ does not enforce idle timeout for persistent searches: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--set idle-time-limit:24h \
--trustAll \
--no-prompt


The example shown sets the idle time limit to 24 hours.

12.3. Limiting Maximum Request Size

The default maximum request size of 5 MB, set using the advanced connection handler property max-request-size, is sufficient to satisfy most client requests. Yet, there are some cases where you might need to raise the request size limit. For example, if clients add groups with large numbers of members, those add requests can go beyond the 5 MB limit:

$dsconfig \ set-connection-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "LDAP Connection Handler" \ --set max-request-size:20mb \ --trustAll \ --no-prompt  The example shown sets the maximum request size on the LDAP connection handler to 20 MB. 12.4. Resource Limits and Proxied Authorization Proxied authorization uses a standard LDAP control to permit an application to bind as one user and then carry out LDAP operations on behalf of other users. When using proxied authorization as described in Section 2.8, "Configuring Proxied Authorization" in the OpenDJ Directory Server Developer's Guide know that the resource limits do not change when the user proxies as another user. In other words, resource limits depend on the bind DN, not the proxy authorization identity. Chapter 13. Implementing Attribute Value Uniqueness This chapter shows you how to enforce that specified attributes do not have repeated values in different directory entries. You can use attribute uniqueness, for example, to prevent two user entries sharing the same email address. In this chapter you will learn to: • Enforce uniqueness for user IDs and other attributes • Limit the scope of attribute value uniqueness • Manage attribute value uniqueness across replicated directory servers Some attribute values ought to remain unique. If you are using uid values as RDNs to distinguish between millions of user entries stored under ou=People, then you do not want your directory to contain two or more identical uid values. If your credit card or mobile number is stored as an attribute value on your directory entry, you certainly do not want to share that credit card or mobile number with another customer. The same is true for your email address. The difficulty for you as directory administrator lies in implementing attribute value uniqueness without sacrificing the high availability that comes from using OpenDJ's loosely consistent, multi-master data replication. Indeed OpenDJ's replication model lets you maintain write access during network outages for directory applications. Yet, write access during a network outage can result in the same, theoretically unique attribute value getting assigned to two different entries at once. You do not notice the duplicate assignment until the network outage ends and replication resumes. This chapter shows you how to set up attribute value uniqueness in your directory environment with the following procedures: OpenDJ directory server uses the unique attribute plugin to handle attribute value uniqueness. As shown in the examples in this chapter, you can configure the unique attribute plugin to handle one or more attributes and to handle entries under one or more base DNs. You can also configure multiple instances of the plugin for the same OpenDJ directory server. Procedure 13.1. To Enable Unique UIDs OpenDJ provides a unique attribute plugin that you configure by using the dsconfig command. By default, the plugin is prepared to ensure attribute values are unique for uid attributes. 1. Set the base DN where uid should have unique values, and enable the plugin: $ dsconfig \
set-plugin-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--plugin-name "UID Unique Attribute" \
--set base-dn:ou=people,dc=example,dc=com \
--set enabled:true \
--trustAll \
--no-prompt


Alternatively, you can specify multiple base DNs for unique values across multiple suffixes:

$dsconfig \ set-plugin-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDn "cn=Directory Manager" \ --bindPassword password \ --plugin-name "UID Unique Attribute" \ --set enabled:true \ --add base-dn:ou=people,dc=example,dc=com \ --add base-dn:ou=people,dc=example,dc=org \ --trustAll \ --no-prompt  2. Check that the plugin is working correctly: $ cat bjensen.ldif
dn: uid=ajensen,ou=People,dc=example,dc=com
changetype: modify
uid: bjensen

$ldapmodify \ --defaultAdd \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --filename bjensen.ldif Processing MODIFY request for uid=ajensen,ou=People,dc=example,dc=com MODIFY operation failed Result Code: 19 (Constraint Violation) Additional Information: A unique attribute conflict was detected for attribute uid: value bjensen already exists in entry uid=bjensen,ou=People,dc=example,dc=com  If you have set up multiple suffixes, you might try something like this: $ cat bjensen.ldif
dn: uid=bjensen,ou=People,dc=example,dc=org
objectClass: top
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
cn: Babs
sn: Jensen
uid: bjensen

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --defaultAdd \ --filename bjensen.ldif Processing ADD request for uid=bjensen,ou=People,dc=example,dc=org ADD operation failed Result Code: 19 (Constraint Violation) Additional Information: A unique attribute conflict was detected for attribute uid: value bjensen already exists in entry uid=bjensen,ou=People,dc=example,dc=com  Procedure 13.2. To Enable Unique Values For Other Attributes You can also configure the unique attribute plugin for use with other attributes, such as mail, mobile, or attributes you define, for example cardNumber. 1. Before you set up the plugin, index the attribute for equality. See Section 7.4, "Configuring and Rebuilding Indexes" for instructions. 2. Set up the plugin configuration for your attribute. You can either add the attribute to an existing plugin configuration, or create a new plugin configuration including the attribute. When choosing between these alternatives, keep in mind that values must be unique across the attributes and base DNs specified in each plugin configuration. Therefore only group attributes together in the same configuration if you want each value to be unique for all attributes. For example, you might create a single plugin configuration for telephone, fax, mobile, and pager numbers. As an alternative example, suppose user IDs are numeric, that user entries also specify uidNumber, and that user IDs are normally the same as their uidNumbers. In that case you create separate unique attribute configurations for uid and uidNumber: • If you want to add the attribute to an existing plugin configuration, do so as shown in the following example which uses the plugin configuration from Procedure 13.1, "To Enable Unique UIDs": $ dsconfig \
set-plugin-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--plugin-name "UID Unique Attribute" \
--trustAll \
--no-prompt

• If you want to create a new plugin configuration, do so as shown in the following example:

 $dsconfig \ create-plugin \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --plugin-name "Unique mobile numbers" \ --type unique-attribute \ --set enabled:true \ --set base-dn:ou=people,dc=example,dc=com \ --set type:mobile \ --trustAll \ --no-prompt  3. Check that the plugin is working correctly: $ cat mobile.ldif
dn: uid=ajensen,ou=People,dc=example,dc=com
changetype: modify
mobile: +1 828 555 1212

dn: uid=bjensen,ou=People,dc=example,dc=com
changetype: modify
mobile: +1 828 555 1212

$ldapmodify \ --defaultAdd \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --filename mobile.ldif Processing MODIFY request for uid=ajensen,ou=People,dc=example,dc=com MODIFY operation successful for DN uid=ajensen,ou=People,dc=example,dc=com Processing MODIFY request for uid=bjensen,ou=People,dc=example,dc=com MODIFY operation failed Result Code: 19 (Constraint Violation) Additional Information: A unique attribute conflict was detected for attribute mobile: value +1 828 555 1212 already exists in entry uid=ajensen,ou=People,dc=example,dc=com  Procedure 13.3. To Limit The Scope of Uniqueness In some cases you need attribute uniqueness separately for different base DNs in your directory. For example, you need all uid values to remain unique both for users in dc=example,dc=com and dc=example,dc=org, but it is not a problem to have one entry under each base DN with the same user ID as the organizations are separate. The following steps demonstrate how to limit the scope of uniqueness by creating separate configuration entries for the unique attribute plugin. 1. If the attribute you target is not indexed for equality by default, index the attribute for equality. See Section 7.4, "Configuring and Rebuilding Indexes" for instructions. The examples in this procedure target the user ID attribute, uid, which is indexed for equality by default. 2. For each base DN, set up a configuration entry that ensures the target attribute values are unique: $ dsconfig \
create-plugin \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--plugin-name "Unique Example.com UIDs" \
--type unique-attribute \
--set enabled:true \
--set base-dn:dc=example,dc=com \
--set type:uid \
--trustAll \
--no-prompt

$dsconfig \ create-plugin \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --plugin-name "Unique Example.org UIDs" \ --type unique-attribute \ --set enabled:true \ --set base-dn:dc=example,dc=org \ --set type:uid \ --trustAll \ --no-prompt  3. Check that the plugin is working correctly: $ cat uniq-ids.ldif
dn: uid=unique,ou=People,dc=example,dc=com
uid: unique
givenName: Unique
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: top
cn: Unique Person
sn: Person

dn: uid=unique,ou=People,dc=example,dc=org
uid: unique
givenName: Unique
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: top
cn: Unique Person
sn: Person

dn: uid=copycat,ou=People,dc=example,dc=com
uid: unique
uid: copycat
givenName: Copycat
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: top
cn: Copycat Person
sn: Person

MAY ( userPassword $telephoneNumber$ seeAlso $description ) X-ORIGIN 'RFC 4519' )  Entries all have an attribute identifying their object classes, called objectClass. Object class definitions start with an object identifier (OID), and generally a short name that is easier to remember than the OID. The definition here says that the person object class inherits from the top object class, which is the top-level parent of all object classes. An entry's objectclass attribute lists the entry's object classes. An entry can have one STRUCTURAL object class inheritance branch, such as top - person - organizationalPerson - inetOrgPerson. Yet entries can have multiple AUXILIARY object classes. The object class then defines the attribute types that must be included, and the attribute types that may be included on entries having the object class. • An attribute syntax constrains what directory clients can store as attribute values. An attribute syntax is identified in an attribute type definition by its OID. String-based syntax OIDs are optionally followed by a number set between braces that represents a minimum upper bound on the number of characters in the attribute value. For example, in the attribute type definition shown above, the syntax is 1.3.6.1.4.1.1466.115.121.1.26{256}. The syntax is an IA5 string (composed of characters from the international version of the ASCII character set) that can contain at least 256 characters. You can find a table matching attribute syntax OIDs with their human-readable names in RFC 4517, Appendix A. Summary of Syntax Object Identifiers. The RFC describes attribute syntaxes in detail. Alternatively, you can see the attribute syntaxes that OpenDJ supports by opening the OpenDJ control panel and browsing to Schema > Manage Schema > Attribute Syntaxes. You can also list them by using the dsconfig command. Although attribute syntaxes are often specified in attribute type definitions, directory servers do not always check that attribute values comply with attribute syntaxes. OpenDJ directory server does tend to enforce compliance by default, in particular for certificates, country strings, directory strings, JPEG photos, and telephone numbers. The aim is to avoid accumulating garbage in your directory data. If you are trying unsuccessfully to import non-compliant data from a more lenient directory server, you can either clean the data before importing it, or if cleaning the data is not an option, read Section 14.3, "Relaxing Schema Checking to Import Legacy Data". When creating your own attribute type definitions, use existing attribute syntaxes where possible. If you must create your own attribute syntax, then consider the extensions in Extensions for Attribute Syntax Descriptions. • Matching rules determine how the directory server compares attribute values to assertion values for LDAP search and LDAP compare operations. For example, suppose you search with the filter (uid=bjensen). The assertion value in this case is bjensen. OpenDJ has the following schema definition for the user ID attribute: attributeTypes: ( 0.9.2342.19200300.100.1.1 NAME ( 'uid' 'userid' ) EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{256} X-ORIGIN 'RFC 4519' )  When finding an equality match for your search, OpenDJ uses the caseIgnoreMatch matching rule to check for user ID attribute values that equal bjensen without regard to case. You can see the matching rules that OpenDJ supports by opening the OpenDJ control panel and browsing to Schema > Manage Schema > Matching Rules. Notice that many matching rules support string collation in languages other than English. You can also list matching rules by using the dsconfig command. As you can read in examples such as Example 2.7, "Search: Listing Active Accounts" in the OpenDJ Directory Server Developer's Guide, OpenDJ matching rules enable directory clients to compare other values besides strings, for example. OpenDJ exposes schema over protocol through the cn=schema entry. OpenDJ stores the schema definitions corresponding to the entry in LDIF under the config/schema/ directory. Many standard definitions and definitions pertaining to the server configuration are included at installation time. 14.2. Updating Directory Schema OpenDJ directory server is designed to permit updating the list of directory schema definitions while the server is running. As a result you can add support for new applications that require new attributes or new kinds of entries without interrupting the directory service. OpenDJ also replicates schema definitions, so the schema you add on one replica is propagated to other replicas without the need for manual intervention. As it is easy to introduce typos into schema definitions, the best way to start defining your own schema is with the OpenDJ Control Panel. Open the control panel > Schema > Manage Schema window to get started creating your custom object classes and attribute types. As object classes reference attribute types, you first create custom attribute types, and then create the object class that references the attribute types. Create a custom attribute type through the New Attribute window. Using the New Object Class window, create an auxiliary object class that allows your new custom attribute type. You set the type to Auxiliary under Extra Options. When you finish, the schema changes show up by default in the file config/schema/99-user.ldif. Notice that the file name starts with a number, 99. This number is larger than the numbers prefixing other schema file names. In fact, OpenDJ reads the schema files in sorted order, reading schema definitions as they occur. If OpenDJ reads a schema definition for an object class before it has read the definitions of the attribute types mentioned in the object class definition, then it displays an error. Therefore, when naming your schema file, make sure the name appears in the sorted list of file names after all the schema files containing definitions that your schema definitions depends on. The default file name for your schema, 99-user.ldif, ensures that your definitions load only after all of the schema files installed by default. You can create this file in the lab using the control panel, and then apply the definitions in production by adapting the content for use with the ldapmodify command, for example: $ cat config/schema/99-user.ldif
dn: cn=schema
objectClass: top
objectClass: ldapSubentry
objectClass: subschema
cn: schema
attributeTypes: ( temporary-fake-attr-id NAME 'myCustomAttribute' EQUALITY case
IgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstrings
Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE userApplications )
objectClasses: ( temporary-fake-oc-id NAME 'myCustomObjClass
' SUP top AUXILIARY MAY myCustomAttribute )
modifiersName: cn=Directory Manager,cn=Root DNs,cn=config
modifyTimestamp: 20110620095948Z


To test your schema definition, add the object class and attribute to an entry:

$cat custom-attr.ldif dn: uid=bjensen,ou=People,dc=example,dc=com changetype: modify add: objectClass objectClass: myCustomObjClass - add: myCustomAttribute myCustomAttribute: Testing 1, 2, 3...$ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
--filename custom-attr.ldif
Processing MODIFY request for uid=bjensen,ou=People,dc=example,dc=com
MODIFY operation successful for DN uid=bjensen,ou=People,dc=example,dc=com

$ldapsearch \ --port 1389 \ --baseDN dc=example,dc=com \ uid=bjensen \ myCustomAttribute dn: uid=bjensen,ou=People,dc=example,dc=com myCustomAttribute: Testing 1, 2, 3...  In addition to supporting the standard schema definitions that are described in RFC 4512, section 4.1, OpenDJ also supports the following extensions that you can use when adding your own definitions: Extensions for All Schema Definitions X-ORIGIN Used to specify the origin of a schema element. Examples include X-ORIGIN 'RFC 4519', X-ORIGIN 'draft-ietf-ldup-subentry', and X-ORIGIN 'OpenDJ Directory Server'. X-SCHEMA-FILE Used to specify the relative path to the schema file containing the schema element such as X-SCHEMA-FILE '00-core.ldif'. Schema definitions are located by default in /path/to/opendj/config/schema/*.ldif files. Extensions for Attribute Syntax Descriptions X-ENUM Used to define a syntax that is an enumeration of values. The following attribute syntax description defines a syntax allowing four possible attribute values, for example: ldapSyntaxes: ( security-label-syntax-oid DESC 'Security Label' X-ENUM ( 'top-secret' 'secret' 'confidential' 'unclassified' ) )  X-PATTERN Used to define a syntax based on a regular expression pattern, where valid regular expressions are those defined for java.util.regex.Pattern. The following attribute syntax description defines a simple, lenient SIP phone URI syntax check: ldapSyntaxes: ( simple-sip-uri-syntax-oid DESC 'Lenient SIP URI Syntax' X-PATTERN '^sip:[a-zA-Z0-9.]+@[a-zA-Z0-9.]+(:[0-9]+)?$' )

X-SUBST

Used as a fallback to substitute a defined syntax for one that OpenDJ does not implement. The following example substitutes Directory String syntax, which has OID 1.3.6.1.4.1.1466.115.121.1.15, for a syntax that OpenDJ does not implement:

ldapSyntaxes: ( non-implemented-syntax-oid DESC 'Not Implemented in OpenDJ'
X-SUBST '1.3.6.1.4.1.1466.115.121.1.15' )

Extension for Attribute Type Descriptions
X-APPROX

X-APPROX is used to specify the approximate matching rule to use for a given attribute type when not using the default, which is the double metaphone approximate match.

14.3. Relaxing Schema Checking to Import Legacy Data

By default, OpenDJ accepts data that follows the schema for allowable and rejected data. You might have legacy data from a directory service that is more lenient, allowing non-standard constructions such as multiple structural object classes per entry, not checking attribute value syntax, or even not respecting schema definitions.

For example, when importing data with multiple structural object classes defined per entry, you can relax schema checking to warn rather than reject entries having this issue:

$dsconfig \ set-global-configuration-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set single-structural-objectclass-behavior:warn \ --trustAll \ --no-prompt  You can allow attribute values that do not respect the defined syntax with the dsconfig command as well: $ dsconfig \
set-global-configuration-prop \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--set invalid-attribute-syntax-behavior:warn \
--trustAll \
--no-prompt


You can even turn off schema checking altogether, although turning off schema checking only really makes sense when you are absolutely sure that the entries and attribute values respect the schema definitions, and you simply want to turn off schema checking temporarily to speed up import processing:

$dsconfig \ set-global-configuration-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set check-schema:false \ --trustAll \ --no-prompt  14.4. Standard Schema Included With OpenDJ Server OpenDJ directory server provides many standard schema definitions in these LDIF files under /path/to/opendj/config/schema: 00-core.ldif This file contains a core set of attribute type and object class definitions from the following Internet-Drafts, RFCs, and standards:  draft-ietf-boreham-numsubordinates draft-findlay-ldap-groupofentries draft-furuseth-ldap-untypedobject draft-good-ldap-changelog draft-ietf-ldup-subentry draft-wahl-ldap-adminaddr RFC 1274 RFC 2079 RFC 2256 RFC 2798 RFC 3045 RFC 3296 RFC 3671 RFC 3672 RFC 4512 RFC 4519 RFC 4523 RFC 4524 RFC 4530 RFC 5020 X.501 01-pwpolicy.ldif This file contains schema definitions from draft-behera-ldap-password-policy (Draft 09), which defines a mechanism for storing password policy information in an LDAP directory server. 02-config.ldif This file contains the attribute type and objectclass definitions for use with the directory server configuration. 03-changelog.ldif This file contains schema definitions from draft-good-ldap-changelog, which defines a mechanism for storing information about changes to directory server data. 03-rfc2713.ldif This file contains schema definitions from RFC 2713, which defines a mechanism for storing serialized Java objects in the directory server. 03-rfc2714.ldif This file contains schema definitions from RFC 2714, which defines a mechanism for storing CORBA objects in the directory server. 03-rfc2739.ldif This file contains schema definitions from RFC 2739, which defines a mechanism for storing calendar and vCard objects in the directory server. Note that the definition in RFC 2739 contains a number of errors, and this schema file has been altered from the standard definition in order to fix a number of those problems. 03-rfc2926.ldif This file contains schema definitions from RFC 2926, which defines a mechanism for mapping between Service Location Protocol (SLP) advertisements and LDAP. 03-rfc3112.ldif This file contains schema definitions from RFC 3112, which defines the authentication password schema. 03-rfc3712.ldif This file contains schema definitions from RFC 3712, which defines a mechanism for storing printer information in the directory server. 03-uddiv3.ldif This file contains schema definitions from RFC 4403, which defines a mechanism for storing UDDIv3 information in the directory server. 04-rfc2307bis.ldif This file contains schema definitions from draft-howard-rfc2307bis, which defines a mechanism for storing naming service information in the directory server. 05-rfc4876.ldif This file contains schema definitions from RFC 4876, which defines a schema for storing Directory User Agent (DUA) profiles and preferences in the directory server. 05-samba.ldif This file contains schema definitions required when storing Samba user accounts in the directory server. 05-solaris.ldif This file contains schema definitions required for Solaris and OpenSolaris LDAP naming services. 06-compat.ldif This file contains the attribute type and objectclass definitions for use with the directory server configuration. Chapter 15. Configuring Pass-Through Authentication This chapter focuses on pass-through authentication (PTA), whereby you configure another server to determine the response to an authentication request. A typical use case for PTA involves passing authentication through to Active Directory for users coming from Microsoft Windows systems. In this chapter you will learn to: • Configure password policies to use PTA • Assign PTA policies to users and to groups 15.1. About Pass-through Authentication You use pass-through authentication (PTA) when the credentials for authenticating are stored in a remote directory service instead of OpenDJ. In effect OpenDJ redirects the bind operation against a remote LDAP server. The method OpenDJ uses to redirect the bind depends on the mapping from the user entry in OpenDJ to the corresponding user entry in the remote directory. OpenDJ provides you several choices to set up the mapping: • When both the local entry in OpenDJ and the remote entry in the other server have the same DN, you do not have to set up the mapping. By default, OpenDJ redirects the bind with the original DN and password from the client application. • When the local entry in OpenDJ has been provisioned with an attribute holding the DN of the remote entry, you can specify which attribute holds the DN, and OpenDJ redirects the bind on the remote server using the DN value. • When you cannot get the remote bind DN directly, you need an attribute and value on the OpenDJ entry that corresponds to an identical attribute and value on the remote server. In this case you also need the bind credentials for a user who can search for the entry on the remote server. OpenDJ performs a search for the entry using the matching attribute and value, and then redirects the bind with the DN from the remote entry. You configure PTA as an authentication policy that you associate with a user's entry in the same way that you associate a password policy with a user's entry. Either a user has an authentication policy for PTA, or the user has a local password policy. 15.2. Setting Up Pass-Through Authentication When setting up pass-through authentication, you need to know to which remote server or servers to redirect binds, and you need to know how you map user entries in OpenDJ to user entries in the remote directory. Procedure 15.1. To Set Up SSL Communication For Testing When performing PTA, you protect communications between OpenDJ and the server providing authentication. If you test using SSL with self-signed certificates, and you do not want the client to blindly trust the server, follow these steps to import the authentication server's certificate into the OpenDJ keystore. 1. Export the server certificate from the authentication server. How you perform this step depends on the authentication directory server. With OpenDJ, you can export the certificate as shown here: $ cd /path/to/PTA-Server/config
$keytool \ -exportcert \ -rfc \ -alias server-cert \ -keystore keystore \ -storepass cat keystore.pin \ > /tmp/pta-srv-cert.pem  2. Make note of the host name used in the certificate. You use the host name when configuring the SSL connection. With OpenDJ, you can view the certificate details as shown here: $ keytool \
-list \
-v \
-alias server-cert \
-keystore keystore \
-storepass cat keystore.pin
Alias name: server-cert
Creation date: Sep 12, 2011
Entry type: PrivateKeyEntry
Certificate chain length: 1
Certificate[1]:
Owner: CN=pta-server.example.com, O=OpenDJ Self-Signed Certificate
Issuer: CN=pta-server.example.com, O=OpenDJ Self-Signed Certificate
Serial number: 4e6dc429
Valid from: Mon Sep 12 10:34:49 CEST 2011 until: Wed Sep 11 10:34:49 CEST 2013
Certificate fingerprints:
MD5:  B6:EE:1C:A0:71:12:EF:6F:21:24:B9:50:EF:8B:4E:6A
SHA1: 7E:A1:C9:07:D2:86:56:31:24:14:F7:07:A8:6B:3E:A1:39:63:F4:0E
Signature algorithm name: SHA1withRSA
Version: 3

3. Import the authentication server certificate into OpenDJ's keystore:

$cd /path/to/opendj/config$ keytool \
-importcert \
-alias pta-cert \
-keystore truststore \
-storepass cat keystore.pin \
-file /tmp/pta-srv-cert.pem
Owner: CN=pta-server.example.com, O=OpenDJ Self-Signed Certificate
Issuer: CN=pta-server.example.com, O=OpenDJ Self-Signed Certificate
Serial number: 4e6dc429
Valid from: Mon Sep 12 10:34:49 CEST 2011 until: Wed Sep 11 10:34:49 CEST 2013
Certificate fingerprints:
MD5:  B6:EE:1C:A0:71:12:EF:6F:21:24:B9:50:EF:8B:4E:6A
SHA1: 7E:A1:C9:07:D2:86:56:31:24:14:F7:07:A8:6B:3E:A1:39:63:F4:0E
Signature algorithm name: SHA1withRSA
Version: 3
Trust this certificate? [no]:  yes
Certificate was added to keystore

Procedure 15.2. To Configure an LDAP Pass-Through Authentication Policy

You configure authentication policies with the dsconfig command. Notice that authentication policies are part of the server configuration, and therefore not replicated.

1. Set up an authentication policy for pass-through authentication to the authentication server:

$dsconfig \ create-password-policy \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --type ldap-pass-through \ --policy-name "PTA Policy" \ --set primary-remote-ldap-server:pta-server.example.com:636 \ --set mapped-attribute:uid \ --set mapped-search-base-dn:"dc=PTA Server,dc=com" \ --set mapping-policy:mapped-search \ --set use-ssl:true \ --set trust-manager-provider:JKS \ --trustAll \ --no-prompt  The policy shown here maps identities with this this password policy to identities under dc=PTA Server,dc=com. Users must have the same uid values on both servers. The policy here also uses SSL between OpenDJ and the authentication server. 2. Check that your policy has been added to the list: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--property use-ssl

Password Policy         : Type              : use-ssl
------------------------:-------------------:--------
Default Password Policy : password-policy   : -
PTA Policy              : ldap-pass-through : true
Root Password Policy    : password-policy   : -

Procedure 15.3. To Configure Pass-Through Authentication To Active Directory

The steps below demonstrate how to set up PTA to Active Directory. Here is some information to help you make sense of the steps.

Entries on the OpenDJ side use uid as the naming attribute, and entries also have cn attributes. Active Directory entries use cn as the naming attribute. User entries on both sides share the same cn values. The mapping between entries therefore uses cn.

Consider the example where an OpenDJ account with cn=LDAP PTA User and DN uid=ldapptauser,ou=People,dc=example,dc=com corresponds to an Active Directory account with DN CN=LDAP PTA User,CN=Users,DC=internal,DC=forgerock,DC=com. The steps below enable the user with cn=LDAP PTA User on OpenDJ authenticate through to Active Directory:

$ldapsearch \ --hostname opendj.example.com \ --baseDN dc=example,dc=com \ uid=ldapptauser \ cn dn: uid=ldapptauser,ou=People,dc=example,dc=com cn: LDAP PTA User$ ldapsearch \
--baseDN "CN=Users,DC=internal,DC=forgerock,DC=com" \
"(cn=LDAP PTA User)" \
cn
dn: CN=LDAP PTA User,CN=Users,DC=internal,DC=forgerock,DC=com
cn: LDAP PTA User


OpenDJ must map its uid=ldapptauser,ou=People,dc=example,dc=com entry to the Active Directory entry, CN=LDAP PTA User,CN=Users,DC=internal,DC=forgerock,DC=com. In order to do the mapping, OpenDJ has to perform a search for the user in Active Directory using the cn value it recovers from its own entry for the user. Active Directory does not allow anonymous searches, so part of the authentication policy configuration consists of the administrator DN and password OpenDJ uses to bind to Active Directory to be able to search.

Finally, before setting up the PTA policy, make sure OpenDJ can connect to Active Directory over a secure connection to avoid sending passwords in the clear.

1. Export the certificate from the Windows server.

1. Click start > All Programs > Administrative Tools > Certification Authority, then right-click the CA and select Properties.

2. In the General tab, select the certificate and click View Certificate.

3. In the Certificate dialog, click the Details tab, then click Copy to File...

4. Use the Certificate Export Wizard to export the certificate into a file, such as windows.cer.

2. Copy the exported certificate to the system running OpenDJ.

3. Import the server certificate into OpenDJ's keystore:

$cd /path/to/opendj/config$ keytool \
-importcert \
-keystore truststore \
-storepass cat keystore.pin \
Owner: CN=internal-ACTIVEDIRECTORY-CA, DC=internal, DC=forgerock, DC=com
Issuer: CN=internal-ACTIVEDIRECTORY-CA, DC=internal, DC=forgerock, DC=com
Serial number: 587465257200a7b14a6976cb47916b32
Valid from: Tue Sep 20 11:14:24 CEST 2011 until: Tue Sep 20 11:24:23 CEST 2016
Certificate fingerprints:
MD5:  A3:D6:F1:8D:0D:F9:9C:76:00:BC:84:8A:14:55:28:38
SHA1: 0F:BD:45:E6:21:DF:BD:6A:CA:8A:7C:1D:F9:DA:A1:8E:8A:0D:A4:BF
Signature algorithm name: SHA1withRSA
Version: 3

Extensions:

#1: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
]

#2: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_CertSign
Crl_Sign
]

#3: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: A3 3E C0 E3 B2 76 15 DC   97 D0 B3 C0 2E 77 8A 11  .>...v.......w..
0010: 24 62 70 0A                                        $bp. ] ] #4: ObjectId: 1.3.6.1.4.1.311.21.1 Criticality=false Trust this certificate? [no]: yes Certificate was added to keystore  At this point OpenDJ can connect to Active Directory over SSL. 4. Set up an authentication policy for OpenDJ users to authenticate to Active Directory: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--type ldap-pass-through \
--policy-name "AD PTA Policy" \
--set mapped-attribute:cn \
--set mapped-search-base-dn:"CN=Users,DC=internal,DC=forgerock,DC=com" \
DC=forgerock,DC=com" \
--set mapping-policy:mapped-search \
--set trust-manager-provider:JKS \
--set use-ssl:true \
--trustAll \
--no-prompt

5. Assign the authentication policy to a test user:

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password dn: uid=ldapptauser,ou=People,dc=example,dc=com changetype: modify add: ds-pwp-password-policy-dn ds-pwp-password-policy-dn: cn=AD PTA Policy,cn=Password Policies,cn=config Processing MODIFY request for uid=ldapptauser,ou=People,dc=example,dc=com MODIFY operation successful for DN uid=ldapptauser,ou=People,dc=example,dc=com  6. Check that the user can bind using PTA to Active Directory: $ ldapsearch \
--hostname opendj.example.com \
--port 1389 \
--baseDN dc=example,dc=com \
--bindDN uid=ldapptauser,ou=People,dc=example,dc=com \
"(cn=LDAP PTA User)" \
dn: uid=ldapptauser,ou=People,dc=example,dc=com
cn: LDAP PTA User


Notice that to complete the search, the user authenticated with a password to Active Directory, though no userpassword value is present on the entry on the OpenDJ side.

15.3. Assigning Pass-Through Authentication Policies

You assign authentication policies in the same way as you assign password policies, by using the ds-pwp-password-policy-dn attribute.

Note

Although you assign the pass-through authentication policy using the same attribute as for password policy, the authentication policy is not in fact a password policy. Therefore, the user with a pass-through authentication policy does not have a value for the operational attribute pwdPolicySubentry:

$ldapsearch \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN dc=example,dc=com \ uid=user.0 \ pwdPolicySubentry dn: uid=user.0,ou=People,dc=example,dc=com  Procedure 15.4. To Assign a Pass-Through Authentication Policy To a User Users depending on PTA no longer need a local password policy, as they no longer authenticate locally. Examples in the following procedure work for this user, whose entry on OpenDJ is as shown. Notice that the user has no password set. The user's password on the authentication server is password: dn: uid=user.0,ou=People,dc=example,dc=com cn: Aaccf Amar description: This is the description for Aaccf Amar. employeeNumber: 0 givenName: Aaccf homePhone: +1 225 216 5900 initials: ASA l: Panama City mail: user.0@maildomain.net mobile: +1 010 154 3228 objectClass: person objectClass: inetorgperson objectClass: organizationalperson objectClass: top pager: +1 779 041 6341 postalAddress: Aaccf Amar$01251 Chestnut Street$Panama City, DE 50369 postalCode: 50369 sn: Amar st: DE street: 01251 Chestnut Street telephoneNumber: +1 685 622 6202 uid: user.0  This user's entry on the authentication server also has uid=user.0, and the pass-through authentication policy performs the mapping to find the user entry in the authentication server. 1. Prevent users from changing their own password policies: $ cat protect-pta.ldif
dn: ou=People,dc=example,dc=com
changetype: modify
aci: (target ="ldap:///uid=*,ou=People,dc=example,dc=com")(targetattr =
"ds-pwp-password-policy-dn")(version 3.0;acl "Cannot choose own pass
word policy";deny (write)(userdn = "ldap:///self");)

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --filename protect-pta.ldif Processing MODIFY request for ou=People,dc=example,dc=com MODIFY operation successful for DN ou=People,dc=example,dc=com  2. Update the user's ds-pwp-password-policy-dn attribute: $ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
dn: uid=user.0,ou=People,dc=example,dc=com
changetype: modify

Processing MODIFY request for uid=user.0,ou=People,dc=example,dc=com
MODIFY operation successful for DN uid=user.0,ou=People,dc=example,dc=com

3. Check that the user can authenticate through to the authentication server:

$ldapsearch \ --port 1389 \ --baseDN dc=example,dc=com \ --bindDN uid=user.0,ou=People,dc=example,dc=com \ --bindPassword password \ uid=user.0 \ cn sn dn: uid=user.0,ou=People,dc=example,dc=com cn: Aaccf Amar sn: Amar  Procedure 15.5. To Assign a Pass-Through Authentication Policy To a Group Examples in the following steps use the PTA policy as defined above. Kirsten Vaughan's entry has been reproduced on the authentication server under dc=PTA Server,dc=com. 1. Create a subentry to assign a collective attribute that sets the ds-pwp-password-policy-dn attribute for group members' entries: $ cat pta-coll.ldif
dn: cn=PTA Policy for Dir Admins,dc=example,dc=com
objectClass: collectiveAttributeSubentry
objectClass: extensibleObject
objectClass: subentry
objectClass: top
cn: PTA Policy for Dir Admins
cn=config
subtreeSpecification: { base "ou=People", specificationFilter "(isMemberOf=

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --defaultAdd \ --filename pta-coll.ldif Processing ADD request for cn=PTA Policy for Dir Admins,dc=example,dc=com ADD operation successful for DN cn=PTA Policy for Dir Admins,dc=example,dc=com  2. Check that OpenDJ has applied the policy. 1. Make sure you can bind as the user on the authentication server: $ ldapsearch \
--port 2389 \
--bindDN "uid=kvaughan,ou=People,dc=PTA Server,dc=com" \
--baseDN "dc=PTA Server,dc=com" \
uid=kvaughan
dn: uid=kvaughan,ou=People,dc=PTA Server,dc=com
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: top
givenName: Kirsten
uid: kvaughan
cn: Kirsten Vaughan
sn: Vaughan
ou: People
mail: jvaughan@example.com

2. Check that the user can authenticate through to the authentication server from OpenDJ directory server:

$ldapsearch \ --port 1389 \ --bindDN "uid=kvaughan,ou=people,dc=example,dc=com" \ --bindPassword password \ --baseDN dc=example,dc=com \ uid=kvaughan \ cn sn dn: uid=kvaughan,ou=People,dc=example,dc=com cn: Kirsten Vaughan sn: Vaughan  Chapter 16. Samba Password Synchronization This chapter covers synchronization between directory passwords and Samba passwords. In this chapter you will learn to: • Configure Samba for use with OpenDJ directory server • Set up the OpenDJ directory sever Samba password plugin for synchronization Samba, the Windows interoperability suite for Linux and UNIX, stores accounts because UNIX and Windows password storage management is not interoperable. The default account storage mechanism is designed to work well with relatively small numbers of accounts and configurations with one domain controller. For larger installations, you can configure Samba to use OpenDJ for storing Samba accounts. See the Samba documentation for your platform for instructions on how to configure an LDAP directory server such as OpenDJ as a Samba passdb backend. The rest of this chapter focuses on how you keep passwords in sync when using OpenDJ for Samba account storage. When you store Samba accounts in OpenDJ, Samba stores its own attributes as defined in the Samba schema. Samba does not use the LDAP standard userPassword attribute to store users' Samba passwords. You can configure Samba to apply changes to Samba passwords to LDAP passwords as well, too. Yet, if a user modifies their LDAP password directly without updating the Samba password, the LDAP and Samba passwords get out of sync. The OpenDJ Samba Password plugin resolves this problem for you. The plugin intercepts password changes to Samba user profiles, synchronizing Samba password and LDAP password values. For an incoming Password Modify Extended Request or modify request changing the user password, the OpenDJ Samba Password plugin detects whether the user's entry reflects a Samba user profile (entry has object class sambaSAMAccount), hashes the incoming password value, and applies the password change to the appropriate password attribute, keeping the password values in sync. The OpenDJ Samba Password plugin can perform synchronization as long as new passwords values are provided in cleartext in the modification request. If you configure Samba to synchronize LDAP passwords when it changes Samba passwords, then the plugin can ignore changes by the Samba user to avoid duplicate synchronization. Procedure 16.1. To Set Up a Samba Administrator Account The Samba Administrator synchronizes LDAP passwords after changing Samba passwords by issuing a Password Modify Extended Request. In Samba's smb.conf configuration file, the value of ldap admin dn is set to the DN of this account. When the Samba Administrator changes a user password, the plugin ignores the changes, so choose a distinct account different from Directory Manager and other administrators. 1. Create or choose an account for the Samba Administrator: $ cat samba.ldif
givenName: Samba
mail: samba@example.com
objectClass: person
objectClass: inetOrgPerson
objectClass: organizationalPerson
objectClass: top

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --defaultAdd \ --filename samba.ldif Processing ADD request for uid=samba-admin,ou=Special Users,dc=example,dc=com ADD operation successful for DN uid=samba-admin,ou=Special Users, dc=example,dc=com  2. Ensure the Samba Administrator can reset user passwords: $ cat samba-rights.ldif
changetype: modify

dn: dc=example,dc=com
changetype: modify
aci: (target="ldap:///dc=example,dc=com") (targetattr ="*")(version 3.0; acl "
Samba Admin user rights"; allow(all) groupdn ="ldap:///uid=samba-user,ou=
Special Users,dc=example,dc=com";)

$ldapmodify \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --filename samba-rights.ldif Processing MODIFY request for uid=samba-admin,ou=Special Users,dc=example,dc=com MODIFY operation successful for DN uid=samba-admin,ou=Special Users,dc=example,dc=com Processing MODIFY request for dc=example,dc=com MODIFY operation successful for DN dc=example,dc=com  Procedure 16.2. To Set Up the Samba Password Plugin 1. Determine whether the plugin must store passwords hashed like LanManager (sync-lm-password) or like Windows NT (sync-nt-password), based on how you set up Samba in your environment. 2. Enable the plugin: $ dsconfig \
create-plugin \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--plugin-name "Samba Password Synchronisation" \
--set enabled:true \
--set \
--trustAll \
--no-prompt


At this point the Samba Password plugin is active.

3. When troubleshooting Samba Password plugin issues, you can turn on debug logging as follows:

$dsconfig \ set-log-publisher-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "File-Based Debug Logger" \ --set enabled:true \ --no-prompt \ --trustAll$ dsconfig \
create-debug-target \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--publisher-name "File-Based Debug Logger" \
--set enabled:true \
--trustAll \
--no-prompt

$tail -f /path/to/opendj/logs/debug  Chapter 17. Monitoring, Logging, and Alerts This chapter covers OpenDJ monitoring capabilities. In this chapter you will learn to: • Access monitoring information over LDAP, over SNMP, and though use of JMX. • Monitor directory server status, including the status of directory server tasks • Configure directory server logs and interpret the messages they contain • Configure email settings for administrative alert notifications OpenDJ control panel provides basic monitoring capabilities under Monitoring > General Information, Monitoring > Connection Handler, and Monitoring > Manage Tasks. This chapter covers the other options for monitoring OpenDJ. 17.1. LDAP-Based Monitoring OpenDJ exposes monitoring information over LDAP under the entry cn=monitor. Many different types of information are exposed. The following example shows monitoring information about the userRoot backend holding Example.com data: Interface stability: Evolving (See Section I.2, "ForgeRock Product Interface Stability" in the OpenDJ Reference) $ ldapsearch --port 1389 --baseDN cn=monitor "(cn=userRoot backend)"
dn: cn=userRoot backend,cn=Disk Space Monitor,cn=monitor
disk-state: normal
objectClass: top
objectClass: ds-monitor-entry
objectClass: extensibleObject
disk-dir: /path/to/opendj/db/userRoot
disk-free: 343039315968
cn: userRoot backend

dn: cn=userRoot Backend,cn=monitor
objectClass: top
objectClass: ds-monitor-entry
objectClass: ds-backend-monitor-entry
cn: userRoot Backend
ds-backend-id: userRoot
ds-backend-base-dn: dc=example,dc=com
ds-backend-is-private: FALSE
ds-backend-entry-count: 176
ds-base-dn-entry-count: 176 dc=example,dc=com
ds-backend-writability-mode: enabled


You can set global ACIs on the Access Control Handler if you want to limit read access under cn=monitor.

17.2. SNMP-Based Monitoring

OpenDJ lets you monitor the server over SNMP with support for the Management Information Base described in RFC 2605: Directory Server Monitoring MIB.

OpenDJ SNMP-based monitoring depends on OpenDMK, which you must download separately. Install the Full Binary Bundle by using the GUI installer, which requires that you accept the Binary License for Project OpenDMK. OpenDJ directory server that you download from ForgeRock is built with OpenDMK, but due to licensing OpenDMK is not part of OpenDJ. SNMP is therefore not enabled by default.

To run the OpenDMK installer, use the self-extracting .jar:

$java -jar ~/Downloads/opendmk-1.0-b02-*.jar  If you install under /path/to, then the runtime library needed for SNMP is /path/to/OpenDMK-bin/lib/jdmkrt.jar. Once you have installed OpenDMK, you can set up a connection handler for SNMP by enabling the connection handler, and pointing OpenDJ to your installation of the OpenDMK jdmkrt.jar library: $ dsconfig \
set-connection-handler-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--handler-name "SNMP Connection Handler" \
--set enabled:true \
--set opendmk-jarfile:/path/to/OpenDMK-bin/lib/jdmkrt.jar \
--trustAll \
--no-prompt


By default, the SNMP connection handler listens on port 161 and uses port 162 for traps. On UNIX and Linux systems, only root can normally open these ports. Therefore if you install as a normal user, you might want to change the listen and trap ports:

$dsconfig \ set-connection-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "SNMP Connection Handler" \ --set listen-port:11161 \ --set trap-port:11162 \ --trustAll \ --no-prompt  Restart the SNMP connection handler to take the port number changes into account. To restart the connection handler, you disable it, then enable it again: $ dsconfig \
set-connection-handler-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--handler-name "SNMP Connection Handler" \
--set enabled:false \
--trustAll \
--no-prompt

$dsconfig \ set-connection-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "SNMP Connection Handler" \ --set enabled:true \ --trustAll \ --no-prompt  Use a command such as snmpwalk to check that the SNMP listen port works: $ snmpwalk -v 2c -c OpenDJ@OpenDJ localhost:11161
SNMPv2-SMI::mib-2.66.1.1.1.1 = STRING: "OpenDJ 4.0.0-SNAPSHOT..."
SNMPv2-SMI::mib-2.66.1.1.2.1 = STRING: "/path/to/opendj"
...

17.3. JMX-Based Monitoring

OpenDJ provides JMX-based monitoring. A number of tools support JMX, including jconsole and jvisualvm, which are bundled with the Sun/Oracle Java platform. JMX is not configured by default. Use the dsconfig command to configure the JMX connection handler:

Interface stability: Evolving (See Section I.2, "ForgeRock Product Interface Stability" in the OpenDJ Reference)

$dsconfig \ set-connection-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "JMX Connection Handler" \ --set enabled:true \ --trustAll \ --no-prompt  By default, no users have privileges to access the JMX connection. The following command adds JMX privileges for Directory Manager: $ dsconfig \
set-root-dn-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--trustAll \
--no-prompt


You must also configure security to login remotely. See the section on Using SSL in Monitoring and Management Using JMX for hints.

Alternatively, you can connect to a local server process by using the server process identifier:

$cat ../logs/server.pid 3363$ jvisualvm --openpid 3363 &


17.4. Server Operation and Tasks

OpenDJ comes with two commands for monitoring server processes and tasks. The status command, described in status(1) in the OpenDJ Reference, displays basic information about the local server, similar to what is seen in the default window of the control panel. The manage-tasks command, described in manage-tasks(1) in the OpenDJ Reference, lets you manage tasks scheduled on a server, such as nightly backup.

The status command takes administrative credentials to read the configuration, as does the control panel:

$status --bindDN "cn=Directory Manager" --bindPassword password --- Server Status --- Server Run Status: Started Open Connections: 1 --- Server Details --- Host Name: localhost Administrative Users: cn=Directory Manager Installation Path: /path/to/opendj Version: OpenDJ 4.0.0-SNAPSHOT Java Version: version Administration Connector: Port 4444 (LDAPS) --- Connection Handlers --- Address:Port : Protocol : State -------------:----------:--------- -- : LDIF : Disabled 0.0.0.0:636 : LDAPS : Disabled 0.0.0.0:1389 : LDAP : Enabled 0.0.0.0:1689 : JMX : Disabled --- Data Sources --- Base DN: dc=example,dc=com Backend ID: userRoot Entries: 163 Replication: Disabled  The manage-tasks command connects over the administration port, and so can connect to both local and remote servers: $ manage-tasks \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--trustAll \
--no-prompt

ID                         Type    Status
--------------------------------------------------------
example                    Backup  Recurring
example-20110623030000000  Backup  Waiting on start time


17.5. Server Logs

By default OpenDJ stores access and errors logs, and a server process ID file under the logs/ directory. For the replication service, OpenDJ also keeps a replication log there. You can also configure a debug log. You can also configure policies about how logs are rotated, and how they are retained. You configure logging using the dsconfig command.

Each log depends on a log publisher, whose type corresponds to the type of log. OpenDJ provides a number of file-based log publishers out of the box, and supports the ForgeRock common audit event framework, sometimes referred to as Common Audit. The ForgeRock common audit event framework provides log handlers for publishing to CSV files, relational databases, and the UNIX system log (Syslog) as described in Section 17.5.2, "Common ForgeRock Access Logs". The framework makes it possible to plug in additional handlers as well.

17.5.1. Access Logs

The access log traces the operations the server processes including timestamps, connection information, and information about the operation itself. The access log can grow quickly, as each client request results in at least one new log message.

The following access log excerpt shows a search operation from the local host, with the first three lines wrapped for readability:

[21/Jun/2011:08:01:53 +0200] CONNECT conn=4 from=127.0.0.1:49708
to=127.0.0.1:1389 protocol=LDAP
[21/Jun/2011:08:01:53 +0200] SEARCH REQ conn=4 op=0 msgID=1
base="dc=example,dc=com" scope=wholeSubtree filter="(uid=bjensen)" attrs="ALL"
[21/Jun/2011:08:01:53 +0200] SEARCH RES conn=4 op=0 msgID=1
result=0 nentries=1 etime=3
[21/Jun/2011:08:01:53 +0200] UNBIND REQ conn=4 op=1 msgID=2
[21/Jun/2011:08:01:53 +0200] DISCONNECT conn=4 reason="Client Unbind"


Notice that by default OpenDJ directory server logs a message for the search request, and a message for the search response.[15] The server also logs request and response messages for other operations that have responses, such as bind and modify operations. The server does not log response messages for all operations, as some operations, such as persistent searches, abandon operations, unbind operations, and abandoned operations, do not have responses. In the preceding excerpt, notice that the log message for the unbind request is followed by a log message for the disconnection.

17.5.2. Common ForgeRock Access Logs

In addition to the default file-based access log formats, OpenDJ directory server supports the ForgeRock common audit event framework. OpenDJ uses the framework to write access logs in formats that are compatible with all products using the framework. The framework uses transaction IDs that make it easy to correlate requests as they traverse the platform. This makes it easier to monitor activity and to enrich reports.

Interface stability: Evolving (See Section I.2, "ForgeRock Product Interface Stability" in the OpenDJ Reference)

The ForgeRock common audit event framework is built around audit event handlers. Audit event handlers can encapsulate their own configurations. Audit event handlers are the same in each product in the ForgeRock platform. As a result, you can plug in custom handlers that comply with the framework without having to upgrade OpenDJ directory server.

The ForgeRock common audit event framework includes handlers for logging audit event messages to local files and facilities, as well as to remote systems. Handlers for the following are supported:

• CSV files, with support for tamper-evident logs.

OpenDJ supports LDAP and HTTP CSV access logs, which you must configure in order to use.

• Elasticsearch server.

You configure the Elasticsearch handler as an external log publisher that logs access messages to Elasticsearch.

• Relational database using JDBC.

You configure the JDBC handler as an external log publisher that logs access messages to a relational database.

• The UNIX system log facility.

Although it is rarely used for access events, you can configure the Syslog handler as an external log publisher that logs access messages to the UNIX Syslog facility.

The ForgeRock common audit event framework supports a variety of audit event topics. OpenDJ currently supports handling for access events, which are system boundary events such as the initial request and final response to that request. In other words, the implementation in OpenDJ is focused only on access logging. Based on the connection handler for the request, OpenDJ divides access events into ldap-access events and http-access events.

To enable common audit-based logging, follow one of these procedures:

Procedure 17.1. To Enable LDAP CSV Access Logs

After you complete the following steps, OpenDJ directory server records LDAP access event messages in files named like logs/ldap-access.csv:

1. If you trust transaction IDs sent by client applications, and want monitoring and reporting systems consuming the logs to allow correlation of requests as they traverse multiple servers, update the global server configuration as described in Procedure 17.5, "To Trust Transaction IDs".

2. Create an enabled CSV File Access Log Publisher with optional rotation and retention policies as in the following example:

$dsconfig \ create-log-publisher \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "Common Audit Csv File Access Logger" \ --type csv-file-access \ --set enabled:true \ --set "rotation-policy:24 Hours Time Limit Rotation Policy" \ --set "rotation-policy:Size Limit Rotation Policy" \ --set "retention-policy:File Count Retention Policy" \ --trustAll \ --no-prompt  You can view the log publisher properties to check your work as in the following example: $ dsconfig \
get-log-publisher-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--publisher-name "Common Audit Csv File Access Logger" \
--trustAll \
--no-prompt
Property           : Value(s)
-------------------:-----------------------------------------------------------
csv-delimiter-char : ","
enabled            : true
filtering-policy   : no-filtering
key-store-file     : -
key-store-pin-file : -
log-control-oids   : false
log-directory      : logs
retention-policy   : File Count Retention Policy
rotation-policy    : 24 Hours Time Limit Rotation Policy, Size Limit Rotation
: Policy
tamper-evident     : false


Notice that when setting the CSV File Access Log Publisher properties, you can set the log directory, but you cannot change the log file name, which contains ldap-access.

3. If you require tamper-evident logs, prepare a keystore as described in Procedure 17.3, "To Prepare a Keystore for Tamper-Evident Logs". Then enable tamper-evident capability as in the following example:

$dsconfig \ set-log-publisher-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password --publisher-name "Common Audit Csv File Access Logger" \ --set tamper-evident:true \ --set key-store-file:config/audit-keystore \ --set key-store-pin-file:config/audit-keystore.pin \ --trustAll \ --no-prompt  Tamper-evident logging relies on digital signatures and regularly flushing messages to the log system. In high-volume directory deployments with heavy access patterns, signing log messages has a severe negative impact on server performance, reducing throughput by orders of magnitude. Make certain that you test the performance impact of tamper-evident logging with realistic access patterns for your deployment before enabling the feature in production. Procedure 17.2. To Enable HTTP CSV Access Logs If you have enabled the HTTP connection handler as described in Procedure 5.8, "To Set Up REST Access to User Data", you might want to enable CSV-format HTTP access logs. After you complete the following steps, OpenDJ directory server records HTTP access event messages in files named like logs/http-access.csv: 1. If you trust transaction IDs sent by client applications, and want monitoring and reporting systems consuming the logs to allow correlation of requests as they traverse multiple servers, update the global server configuration as described in Procedure 17.5, "To Trust Transaction IDs". 2. Create an enabled CSV File HTTP Access Log Publisher with optional rotation and retention policies as in the following example: $ dsconfig \
create-log-publisher \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--publisher-name "Common Audit Csv File HTTP Access Logger" \
--type csv-file-http-access \
--set enabled:true \
--set "rotation-policy:24 Hours Time Limit Rotation Policy" \
--set "rotation-policy:Size Limit Rotation Policy" \
--set "retention-policy:File Count Retention Policy" \
--trustAll \
--no-prompt


You can view the log publisher properties to check your work as in the following example:

$dsconfig \ get-log-publisher-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "Common Audit Csv File HTTP Access Logger" \ --trustAll \ --no-prompt Property : Value(s) -------------------:----------------------------------------------------------- csv-delimiter-char : "," enabled : true key-store-file : - key-store-pin-file : - log-directory : logs retention-policy : File Count Retention Policy rotation-policy : 24 Hours Time Limit Rotation Policy, Size Limit Rotation : Policy tamper-evident : false  Notice that when setting the CSV File HTTP Access Log Publisher properties, you can set the log directory, but you cannot change the log file name, which contains http-access. 3. If you require tamper-evident logs, prepare a keystore as described in Procedure 17.3, "To Prepare a Keystore for Tamper-Evident Logs". Then enable tamper-evident capability as in the following example: $ dsconfig \
set-log-publisher-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--publisher-name "Common Audit Csv File HTTP Access Logger" \
--set tamper-evident:true \
--set key-store-file:config/audit-keystore \
--set key-store-pin-file:config/audit-keystore.pin \
--trustAll \
--no-prompt


Tamper-evident logging relies on digital signatures and regularly flushing messages to the log system. In high-volume directory deployments with heavy access patterns, signing log messages has a severe negative impact on server performance, reducing throughput by orders of magnitude.

Make certain that you test the performance impact of tamper-evident logging with realistic access patterns for your deployment before enabling the feature in production.

Procedure 17.3. To Prepare a Keystore for Tamper-Evident Logs

Tamper-evident logging depends on a public key/private key pair and on a secret key that are stored together in a JCEKS keystore. Follow these steps to prepare the keystore:

1. Create a password for the keystore.

The following example uses the default file name. If you use a different filename, then you must edit key-store-pin-file property when configuring the log publisher:

$echo password > /path/to/opendj/config/audit-keystore.pin$ chmod 400 /path/to/opendj/config/audit-keystore.pin

2. Generate a key pair in the keystore.

The CSV event handler expects a JCEKS-type keystore with a key alias of Signature for the signing key, where the key is generated with the RSA key algorithm and the SHA256withRSA signature algorithm.

The following example uses the default file name. If you use a different filename, then you must edit key-store-file property when configuring the log publisher:

$keytool \ -genkeypair \ -keyalg RSA \ -sigalg SHA256withRSA \ -alias "Signature" \ -dname "CN=opendj.example.com,O=Example Corp,C=FR" \ -keystore /path/to/opendj/config/audit-keystore \ -storetype JCEKS \ -storepass cat /path/to/opendj/config/audit-keystore.pin \ -keypass cat /path/to/opendj/config/audit-keystore.pin  3. Generate a secret key in the keystore. The CSV event handler expects a JCEKS-type keystore with a key alias of Password for the symmetric key, where the key is generated with the HmacSHA256 key algorithm and 256-bit key size. The following example uses the default file name. If you use a different filename, then you must edit key-store-file property when configuring the log publisher: $ keytool \
-genseckey \
-keyalg HmacSHA256 \
-keysize 256 \
-keystore /path/to/opendj/config/audit-keystore \
-storetype JCEKS \
-storepass cat /path/to/opendj/config/audit-keystore.pin \
-keypass cat /path/to/opendj/config/audit-keystore.pin

4. Verify the contents of the keystore:

$keytool \ -list \ -keystore /path/to/opendj/config/audit-keystore \ -storetype JCEKS \ -storepass cat /path/to/opendj/config/audit-keystore.pin Keystore type: JCEKS Keystore provider: SunJCE Your keystore contains 2 entries signature, Nov 27, 2015, PrivateKeyEntry, Certificate fingerprint (SHA1): 4D:CF:CC:29:...:8B:6E:68:D1 password, Nov 27, 2015, SecretKeyEntry,  Procedure 17.4. To Enable External LDAP or HTTP Access Logging External LDAP or HTTP access event logging lets you use an Elasticsearch handler to log to an Elasticsearch server, a JDBC handler to log to a relational database, a Syslog handler to log to the UNIX Syslog facility, or a custom handler to consume the events in some other way. The configuration depends on the handler, and is provided as a JSON file that corresponds to the handler. Follow these steps: 1. If you trust transaction IDs sent by client applications, and want monitoring and reporting systems consuming the logs to allow correlation of requests as they traverse multiple servers, update the global server configuration as described in Procedure 17.5, "To Trust Transaction IDs". 2. If necessary, prepare the data store: • For an Elasticsearch server, create a mapping in the index for the messages. • For the relational database that the JDBC handler connects to, create the necessary schema and tables. See the examples in the db directory inside the opendj/lib/forgerock-audit-handler-jdbc.jar file. The columns and fields of the audit event messages correspond to the fields in the logs generated by the CSV audit handler. 3. Create the JSON configuration file for the external handler, and copy it to the config directory for the OpenDJ directory server. 4. For LDAP access logging, create an External Access Log Publisher The following example creates a JDBC LDAP access log publisher: $ dsconfig \
create-log-publisher \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--publisher-name "JDBC LDAP Access Log Publisher" \
--type external-access \
--set enabled:true \
--set config-file:config/jdbc-handler.json \
--trustAll \
--no-prompt

5. For HTTP access logging, create an External HTTP Access Log Publisher

The following example creates a JDBC HTTP access log publisher:

$dsconfig \ create-log-publisher \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "JDBC HTTP Access Log Publisher" \ --type external-http-access \ --set enabled:true \ --set config-file:config/jdbc-handler.json \ --trustAll \ --no-prompt  6. For a custom access logger, follow these general steps: 1. Copy the .jar file for the custom audit event handler to /path/to/opendj/lib/extensions. 2. Prepare the JSON configuration file for the custom handler. 3. Create an External Access Log Publisher or External HTTP Access Log Publisher configuration as appropriate for the custom access logger. Procedure 17.5. To Trust Transaction IDs Client applications using the ForgeRock common audit event framework send transaction IDs with their requests. The transaction IDs are used to correlate audit events for monitoring and reporting that trace the request through multiple applications. Transaction IDs are sent over LDAP using an internal OpenDJ request control. They are sent over HTTP in an HTTP header. By default, OpenDJ directory server is configured not to trust transaction IDs sent with client application requests. The default transaction ID is used instead. The default transaction ID is zero: 0. • Set the advanced global server property, trust-transaction-ids, to true: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--set trust-transaction-ids:true \
--trustAll \
--no-prompt


At this point transaction IDs are trusted, and can be written to the logs.

17.5.2.1. Elasticsearch Audit Event Handler Configuration

An Elasticsearch audit event handler logs audit event messages to an Elasticsearch server. This section briefly describes the JSON configuration file for the handler.

The JSON file has the following format:

{
"class": "org.forgerock.audit.handlers.elasticsearch.ElasticsearchAuditEventHandler",
"config": {
"name": string,               // Handler name, such as "elasticsearch".
"topics": [ string, ...],     // LDAP: "ldap-access"; HTTP: "http-access".
"connection": {
"host": string,             // Elasticsearch host. Default: localhost
"port": number,             // Elasticsearch host. Default: 9200
"useSSL": boolean,          // Connect to Elasticsearch over HTTPS?
"username": string,         // (Optional) User name for HTTP Basic auth.
"password": string          // (Optional) Password for HTTP Basic auth.
},
"indexMapping": {
"indexName": string         // Name of the Elasticsearch index.
},
"buffering": {
"enabled": boolean,         // Buffer messages to be sent? Default: false.
"maxSize": number,          // Maximum number of buffered events.
"writeInterval": duration,  // Interval between sending batch of events.
"maxBatchedEvents": number  // Number of events to send per interval.
}
}
}

Example 17.1. Using an Elasticsearch Audit Log Handler

This example demonstrates logging an HTTP audit event message to a local Elasticsearch server.

To prepare the example, complete these steps:

1. Install and run an Elasticsearch server on localhost:9200.

2. Create an audit index in the Elasticsearch server for OpenDJ HTTP audit event messages:

$curl --request POST --header "Content-Type: application/json" --data '{ "settings": {}, "mappings": { "ldap-access": { "_source": { "enabled": true }, "properties": { "timestamp": { "type": "date" }, "eventName": { "type": "string", "index": "not_analyzed" }, "transactionId": { "type": "string", "index": "not_analyzed" }, "userId": { "type": "string", "index": "not_analyzed" }, "trackingIds": { "type": "string", "index": "not_analyzed" }, "server": { "properties": { "ip": { "type": "string", "index": "not_analyzed" }, "port": { "type": "integer" } } }, "client": { "properties": { "ip": { "type": "string", "index": "not_analyzed" }, "port": { "type": "integer" } } }, "request": { "properties": { "protocol": { "type": "string", "index": "not_analyzed" }, "operation": { "type": "string", "index": "not_analyzed" }, "detail": { "type": "nested" } } }, "ldap": { "properties": { "connId": { "type": "integer", "index": "not_analyzed" }, "msgId": { "type": "integer" }, "dn": { "type": "string" }, "scope": { "type": "string" }, "filter": { "type": "string" }, "attrs": { "type": "string" }, "nentries": { "type": "string" }, "authType": { "type": "string" }, "reqControls": { "type": "string" }, "respControls": { "type": "string" }, "additionalItems": { "type": "string" }, "items": { "type": "string" }, "attr": { "type": "string" }, "failureReason": { "type": "string" }, "idToAbandon": { "type": "integer" }, "maskedResult": { "type": "integer" }, "maskedMessage": { "type": "string" }, "message": { "type": "string" }, "name": { "type": "string" }, "newRDN": { "type": "string" }, "newSup": { "type": "string" }, "deleteOldRDN": { "type": "boolean" }, "oid": { "type": "string" }, "version": { "type": "string" }, "reason": { "type": "string" }, "opType": { "type": "string" } } }, "response": { "properties": { "status": { "type": "string", "index": "not_analyzed" }, "statusCode": { "type": "string", "index": "not_analyzed" }, "detail": { "type": "string", "index": "not_analyzed" }, "elapsedTime": { "type": "integer" }, "elapsedTimeUnits": { "type": "string", "index": "not_analyzed" } } } } }, "http-access": { "_source": { "enabled": true }, "properties": { "timestamp": { "type": "date" }, "eventName": { "type": "string", "index": "not_analyzed" }, "transactionId": { "type": "string", "index": "not_analyzed" }, "userId": { "type": "string", "index": "not_analyzed" }, "trackingIds": { "type": "string", "index": "not_analyzed" }, "server": { "properties": { "ip": { "type": "string", "index": "not_analyzed" }, "port": { "type": "integer" } } }, "client": { "properties": { "ip": { "type": "string", "index": "not_analyzed" }, "port": { "type": "integer" } } }, "request": { "properties": { "protocol": { "type": "string", "index": "not_analyzed" }, "operation": { "type": "string", "index": "not_analyzed" }, "detail": { "type": "nested" } } }, "http": { "properties": { "request": { "properties": { "secure": { "type": "boolean" }, "method": { "type": "string", "index": "not_analyzed" }, "path": { "type": "string", "index": "not_analyzed" }, "queryParameters": { "type": "nested" }, "headers": { "type": "nested" }, "cookies": { "type": "nested" } } }, "response": { "properties": { "headers": { "type": "nested" } } } } }, "response": { "properties": { "status": { "type": "string", "index": "not_analyzed" }, "statusCode": { "type": "string", "index": "not_analyzed" }, "detail": { "type": "string", "index": "not_analyzed" }, "elapsedTime": { "type": "integer" }, "elapsedTimeUnits": { "type": "string", "index": "not_analyzed" } } } } } } }' http://localhost:9200/audit {"acknowledged":true}  3. Configure OpenDJ directory server to enable HTTP access as described in Procedure 5.8, "To Set Up REST Access to User Data". 4. Add a JSON configuration file under for the handler: $ cat /path/to/opendj/config/elasticsearch-handler.json
{
"class": "org.forgerock.audit.handlers.elasticsearch.ElasticsearchAuditEventHandler",
"config": {
"name": "elasticsearch",
"topics": ["http-access"],
"connection": {
"useSSL": false,
"host": "localhost",
"port": 9200
},
"indexMapping": {
"indexName": "audit"
},
"buffering": {
"enabled": true,
"maxSize": 10000,
"writeInterval": "100 ms",
"maxBatchedEvents": 500
}
}
}

5. Configure OpenDJ directory server to use the Elasticsearch audit handler:

 $dsconfig \ create-log-publisher \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "Elasticsearch HTTP Access Log Publisher" \ --type external-http-access \ --set enabled:true \ --set config-file:config/elasticsearch-handler.json \ --trustAll \ --no-prompt  With Elasticsearch and OpenDJ diretory server running, audit event messages for HTTP requests to OpenDJ directory server are sent to Elasticsearch. The following example requests Babs Jensen's entry: $ curl --user bjensen:hifalutin http://opendj.example.com:8080/api/users/bjensen
{
"_id": "bjensen",
"_rev": "00000000828dc352",
"schemas": ["urn:scim:schemas:core:1.0"],
"displayName": "Barbara Jensen",
"name": {
"givenName": "Barbara",
"familyName": "Jensen"
},
"contactInformation": {
"telephoneNumber": "+1 408 555 1862",
},
"meta": {},
"manager": [{
"_id": "trigden",
"displayName": "Torrey Rigden"
}]
}


A search request to Elasticsearch shows the resulting audit event content:

$curl 'localhost:9200/audit/_search?q=*&pretty' { "took" : 31, "timed_out" : false, "_shards" : { "total" : 5, "successful" : 5, "failed" : 0 }, "hits" : { "total" : 1, "max_score" : 1.0, "hits" : [ { "_index" : "audit", "_type" : "http-access", "_id" : "a5c09e11-cc79-4a34-8dbe-b23cc1a79a8b-30", "_score" : 1.0, "_source" : { "eventName" : "OpenDJ Server-HTTP-ACCESS", "timestamp" : "2016-06-07T21:19:23.939Z", "transactionId" : "a5c09e11-cc79-4a34-8dbe-b23cc1a79a8b-29", "server" : { "ip" : "0:0:0:0:0:0:0:1", "port" : 8080 }, "client" : { "ip" : "0:0:0:0:0:0:0:1", "port" : 58907 }, "http" : { "request" : { "secure" : false, "method" : "GET", "path" : "http://opendj.example.com:8080/api/users/bjensen", "queryParameters" : { }, "cookies" : { } }, "response" : { "headers" : { "Cache-Control" : [ "no-cache" ], "Content-Type" : [ "application/json; charset=UTF-8" ], "ETag" : [ "\"00000000828dc352\"" ] } } }, "response" : { "status" : "SUCCESSFUL", "statusCode" : "200", "elapsedTime" : 6, "elapsedTimeUnits" : "MILLISECONDS" } } } ] } }  See the Elasticsearch documentation for details on searching and search results. 17.5.2.2. JDBC Audit Event Handler Configuration The JDBC audit event handler that responds to events by logging messages to an appropriately configured relational database table. This section briefly describes the JSON configuration file for the handler. The JSON file has the following format: { "class": "org.forgerock.audit.handlers.jdbc.JdbcAuditEventHandler", "config": { "name": string, "topics": array, "databaseType": string, "enabled": boolean, "buffering": { "enabled": boolean, "writeInterval": duration, "autoFlush": boolean, "maxBatchedEvents": number, "maxSize": number, "writerThreads": number }, "connectionPool": { "dataSourceClassName": string, "jdbcUrl": string, "username": string, "password": string, "autoCommit": boolean, "connectionTimeout": number, "idleTimeout": number, "maxLifetime": number, "minIdle": number, "maxPoolSize": number, "poolName": string }, "tableMappings": [ { "event": string, "table": string, "fieldToColumn": { "event-field": "database-column" } } ] } }  The class field identifies the handler. The "config" object has the following properties: "name": string, required The name of the event handler. "topics": array of strings, required The topics that this event handler intercepts. OpenDJ supports handling access events that occur at the system boundary, such as arrival of the initial request and departure of the final response. Set this to "topics": [ "http-access" ] or "topics": [ "ldap-access" ]. "databaseType": string, required The database type name. Built-in support is provided for oracle, mysql, and h2. Unrecognized database types rely on a GenericDatabaseStatementProvider. "enabled": boolean, optional Whether this event handler is active. Default: true. "buffering": object, optional Buffering settings for sending messages to the database. The default is for messages to be written to the log file for each event. The buffering object has the following fields: "enabled": boolean, optional Whether log buffering is enabled. Default: false. "writeInterval": duration, required The interval at which to send buffered event messages to the database. This interval must be greater than 0 if buffering is enabled. A duration is a lapse of time expressed in English, such as 23 hours 59 minutes and 59 seconds. Durations are not case sensitive. Negative durations are not supported. The following units can be used in durations: • indefinite, infinity, undefined, unlimited: unlimited duration • zero, disabled: zero-length duration • days, day, d: days • hours, hour, h: hours • minutes, minute, min, m: minutes • seconds, second, sec, s: seconds • milliseconds, millisecond, millisec, millis, milli, ms: milliseconds • microseconds, microsecond, microsec, micros, micro, us: microseconds • nanoseconds, nanosecond, nanosec, nanos, nano, ns: nanoseconds "autoFlush": boolean, optional Whether the events are automatically flushed after being written. Default: true. "maxBatchedEvents": number, optional The maximum number of event messages batched into a PreparedStatement. Default: 100. "maxSize": number, optional The maximum size of the queue of buffered event messages. Default: 5000. "writerThreads": number, optional The number of threads to write buffered event messages to the database. Default: 1. "connectionPool": object, required Connection pool settings for sending messages to the database. The connection pool object has the following fields: "dataSourceClassName": string, optional The class name of the data source for the database. "jdbcUrl": string, required The JDBC URL to connect to the database. "username": string, required The username identifier for the database user with access to write the messages. "password": number, optional The password for the database user with access to write the messages. "autoCommit": boolean, optional Whether to commit transactions automatically when writing messages. Default: true. "connectionTimeout": number, optional The number of milliseconds to wait for a connection from the pool before timing out. Default: 30000. "idleTimeout": number, optional The number of milliseconds to allow a database connection to remain idle before timing out. Default: 600000. "maxLifetime": number, optional The number of milliseconds to allow a database connection to remain in the pool. Default: 1800000. "minIdle": number, optional The minimum number of idle connections in the pool. Default: 10. "maxPoolSize": number, optional The maximum number of connections in the pool. Default: 10. "poolName": string, optional The name of the connection pool. "tableMappings": array of objects, required Table mappings for directing event content to database table columns. A table mappings object has the following fields: "event": string, required The audit event that the table mapping is for. Set this to access. "table": string, required The name of the database table that corresponds to the mapping. "fieldToColumn": object, required This object maps the names of audit event fields to database columns, where the keys and values are both strings. Audit event fields use JSON pointer notation, and are taken from the JSON schema for the audit event content. 17.5.2.3. Syslog Audit Event Handler Configuration The Syslog audit event handler that responds to events by logging messages to the UNIX system log as governed by RFC 5424, The Syslog Protocol. This section briefly describes the JSON configuration file for the handler. The JSON file has the following format: { "class": "org.forgerock.audit.handlers.syslog.SyslogAuditEventHandler", "config": { "name": string, "topics": array, "protocol": string, "host": string, "port": number, "connectTimeout": number, "facility": "string", "buffering": { "enabled": boolean, "maxSize": number }, "severityFieldMappings": [ { "topic": string, "field": string, "valueMappings": { "field-value": "syslog-severity" } } ] } }  The class field identifies the handler. The "config" object has the following properties: "name": string, required The name of the event handler. "topics": array of strings, required The topics that this event handler intercepts. OpenDJ supports handling access events that occur at the system boundary, such as arrival of the initial request and departure of the final response. Set this to "topics": [ "http-access" ] or "topics": [ "ldap-access" ]. "protocol": string, required The transport protocol used to send event messages to the Syslog daemon. Set this to TCP for Transmission Control Protocol, or to UDP for User Datagram Protocol. "host": string, required The hostname of the Syslog daemon to which to send event messages. The hostname must resolve to an IP address. "port": number, required The port of the Syslog daemon to which to send event messages. The value must be between 0 and 65535. "connectTimeout": number, required when using TCP The number of milliseconds to wait for a connection before timing out. "facility": string, required The Syslog facility to use for event messages. Set this to one of the following values: kern Kernel messages user User-level messages mail Mail system daemon System daemons auth Security/authorization messages syslog Messages generated internally by syslogd lpr Line printer subsystem news Network news subsystem uucp UUCP subsystem cron Clock daemon authpriv Security/authorization messages ftp FTP daemon ntp NTP subsystem logaudit Log audit logalert Log alert clockd Clock daemon local0 Local use 0 local1 Local use 1 local2 Local use 2 local3 Local use 3 local4 Local use 4 local5 Local use 5 local6 Local use 6 local7 Local use 7 "buffering": object, optional Buffering settings for writing to the system log facility. The default is for messages to be written to the log for each event. The buffering object has the following fields: "enabled": boolean, optional Whether log buffering is enabled. Default: false. "maxSize": number, optional The maximum number of buffered event messages. Default: 5000. "severityFieldMappings": object, optional Severity field mappings set the correspondence between audit event fields and Syslog severity values. The severity field mappings object has the following fields: "topic": string, required The audit event topic to which the mapping applies. Set this to access. "field": string, required The audit event field to which the mapping applies. Audit event fields use JSON pointer notation, and are taken from the JSON schema for the audit event content. "valueMappings": object, required The map of audit event values to Syslog severities, where both the keys and the values are strings. Syslog severities are one of the following values: emergency System is unusable. alert Action must be taken immediately. critical Critical conditions. error Error conditions. warning Warning conditions. notice Normal but significant condition. informational Informational messages. debug Debug-level messages. 17.5.3. Error Logs The errors log traces server events, error conditions, and warnings, categorized and identified by severity. The following errors log excerpt shows log entries for a backup task, with lines wrapped for readability: [06/Oct/2015:16:58:15 +0200] category=... severity=NOTICE msgID=... msg=Backup task 20151006165815904 started execution [06/Oct/2015:16:58:15 +0200] category=TASK severity=NOTICE msgID=... msg=Starting backup for backend userRoot [06/Oct/2015:16:58:16 +0200] category=UTIL severity=NOTICE msgID=... msg=Archived backup file: dj ... [06/Oct/2015:16:58:16 +0200] category=UTIL severity=NOTICE msgID=... msg=Archived backup file: tasks.ldif [06/Oct/2015:16:58:16 +0200] category=TASK severity=NOTICE msgID=... msg=The backup process completed successfully [06/Oct/2015:16:58:16 +0200] category=... severity=NOTICE msgID=... msg=Backup task 20151006165815904 finished execution in the state Completed successfully  17.5.4. HTTP Access Logs For the HTTP Connection Handler, OpenDJ maintains a separate access log in logs/http-access. This access log, by default configured as the File Based HTTP Access Log Publisher, uses a different format than the LDAP access log. This HTTP access log uses Extended Log File Format with fields described in Microsoft's implementation as well. Interface stability: Evolving (See Section I.2, "ForgeRock Product Interface Stability" in the OpenDJ Reference) The following default fields are shown here in the order they occur in the log file: cs-host Client host name c-ip Client IP address cs-username Username used to authenticate x-datetime Completion timestamp for the HTTP request, which you can configure using the log-record-time-format property cs-method HTTP method requested by the client cs-uri URI requested by the client cs-uri-stem URL-encoded path requested by the client cs-uri-query URL-encoded query parameter string requested by the client cs-version HTTP version requested by the client sc-status HTTP status code for the operation cs(User-Agent) User-Agent identifier x-connection-id Connection ID used for OpenDJ internal operations When using this field to match HTTP requests with internal operations in the LDAP access log, first set the access log advanced property, suppress-internal-operations, to false. By default, internal operations do not appear in the LDAP access log. x-etime Execution time in milliseconds needed by OpenDJ to service the HTTP request x-transaction-id ForgeRock common audit event framework transaction ID for the request This defaults to 0 unless you configure OpenDJ to trust transaction IDs as described in Procedure 17.5, "To Trust Transaction IDs". Missing values are replaced with -. Tabs separate the fields, and if a field contains a tab character, then the field is surrounded with double quotes. OpenDJ then doubles double quotes in the field to escape them. The following example shows an excerpt of an HTTP access log with the default configuration. Lines are folded and space reformatted for the printed page: - 192.168.0.15 bjensen 22/May/2013:10:06:18 +0200 GET /users/bjensen?_prettyPrint=true HTTP/1.1 200 curl/7.21.4 3 40 - 192.168.0.15 bjensen 22/May/2013:10:06:52 +0200 GET /groups/Directory%20Administrators?_prettyPrint=true HTTP/1.1 200 curl/7.21.4 4 41 - 192.168.0.12 bjensen 22/May/2013:10:07:07 +0200 GET /users/missing?_prettyPrint=true HTTP/1.1 200 curl/7.21.4 5 9 - 192.168.0.12 - 22/May/2013:10:07:46 +0200 GET /users/missing?_prettyPrint=true HTTP/1.1 401 curl/7.21.4 6 0 - 192.168.0.15 kvaughan 22/May/2013:10:09:10 +0200 POST /users?_action=create&_prettyPrint=true HTTP/1.1 200 curl/7.21.4 7 120  You can configure the log-format for the access log using the dsconfig command. In addition to the default fields, the following standard fields are supported: c-port Client port number s-computername Server name where the access log was written s-ip Server IP address s-port Server port number 17.5.5. Replication Logs The replication log traces replication events, with entries similar to the errors log. The following excerpt has lines wrapped for readability: [22/Jun/2011:14:37:34 +0200] category=SYNC severity=NOTICE msgID=15139026 msg=Finished total update: exported domain "dc=example,dc=com" from this directory server DS(24065) to all remote directory servers. [22/Jun/2011:14:37:35 +0200] category=SYNC severity=MILD_WARNING msgID=14745663 msg=Replication server RS(23947) at opendj.example.com/10.10.0.168:8989 has closed the connection to this directory server DS(24065). This directory server will now try to connect to another replication server in order to receive changes for the domain "dc=example,dc=com" [22/Jun/2011:14:37:35 +0200] category=SYNC severity=NOTICE msgID=15138894 msg=The generation ID for domain "dc=example,dc=com" has been reset to 3679640  Notice that the replication log does not trace replication operations. Use the external change log instead to get notifications about changes to directory data over protocol. You can alternatively configure an audit log, which is a type of access log that dumps changes in LDIF. 17.5.6. Debug Logs A debug log traces details needed to troubleshoot a problem in the server. Debug logs can grow large quickly, and therefore no debug logs are enabled by default. For debug logging, you must set a debug target to control what gets logged. 17.5.7. Log Rotation and Retention Each file-based log can be associated with a log rotation policy, and a log retention policy. The former can specify when, after how much time, or at what maximum size a log is rotated. The latter can specify a maximum number or size of logs to retain, or an amount of free disk space to maintain. The design allows for custom policies as well. By default the file-based logs are subject to rotation and retention policies that you can list with dsconfig list-log-rotation-policies and dsconfig list-log-retention-policies. For example, view the log rotation policies with the following command: $ dsconfig \
list-log-rotation-policies \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \

Log Rotation Policy                 : Type       : file-size-limit : rotation-interval : time-of-day
------------------------------------:------------:-----------------:-------------------:------------
24 Hours Time Limit Rotation Policy : time-limit : -               : 1 d               : -
7 Days Time Limit Rotation Policy   : time-limit : -               : 1 w               : -
Fixed Time Rotation Policy          : fixed-time : -               : -                 : 2359
Size Limit Rotation Policy          : size-limit : 100 mb          : -                 : -


View the log retention policies with the following command:

$dsconfig \ list-log-retention-policies \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password Log Retention Policy : Type : disk-space-used : free-disk-space : number-of-files ---------------------------------:-----------------:-----------------:-----------------:---------------- File Count Retention Policy : file-count : - : - : 10 Free Disk Space Retention Policy : free-disk-space : - : 500 mb : - Size Limit Retention Policy : size-limit : 500 mb : - : -  Use the dsconfig get-log-publisher-prop command to examine the policies that apply to a particular logger: $ dsconfig \
get-log-publisher-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--publisher-name "File-Based Access Logger" \
--property retention-policy \
--property rotation-policy
Property         : Value(s)
-----------------:-------------------------------------------------------------
retention-policy : File Count Retention Policy
rotation-policy  : 24 Hours Time Limit Rotation Policy, Size Limit Rotation
: Policy


In other words, by default OpenDJ keeps 10 access log files, rotating the access log each day, or when the log size reaches 100 MB.

The dsconfig command offers a number of subcommands for creating and deleting log rotation and retention policies, and for setting policy properties. You can update which policies apply to a logger by using the dsconfig set-log-publisher-prop command.

17.5.8. Log Filtering

Each time a client application sends a request to OpenDJ, the server writes to its access log. As shown above, a simple search operation results in five messages written to the access log. This volume of logging gives you the information to analyze overall access patterns, or to audit access when you do not know in advance what you are looking for.

When you do know what you are looking for, log filtering lets you limit what the server logs, and focus on what you want to see. You define the filter criteria, and also set the filtering policy.

You can filter both access and also audit logs.

Log filtering lets you define rules based these criteria:

• Client IP address, bind DN, group membership

• Port number

• Protocol used (such as LDAP, LDAPS, JMX)

• Response times

• Result codes (only log error results, for example)

• Search response criteria (number of entries returned, whether the search was indexed)

• Target DN

• Type of operation (connect, bind, add, delete, modify, rename, search, etc.)

The filtering policy in the log publisher configuration specifies whether to include or exclude log messages that match the criteria you define. OpenDJ does not filter logs until you update the log publisher configuration.

Example 17.2. Example: Exclude Control Panel-Related Messages

A common development troubleshooting technique consists of sending client requests while tailing the access log:

$tail -f /path/to/opendj/logs/access The trouble is, when OpenDJ control panel is running, or when you are also adapting your configuration using the dsconfig command, OpenDJ writes access log messages related to administration. These might prevent you from noticing the messages that interest you. This example demonstrates how to filter out access log messages due to administrative connections over LDAPS on ports 1636 and 4444. Create access log filtering criteria rules: $ dsconfig \
create-access-log-filtering-criteria \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--publisher-name "File-Based Access Logger" \
--criteria-name "Exclude LDAPS on 1636 and 4444" \
--type generic \
--set connection-port-equal-to:1636 \
--set connection-port-equal-to:4444 \
--set connection-protocol-equal-to:ldaps \
--trustAll \
--no-prompt


Activate filtering to exclude messages from the default access log according to the criteria you specified:

$dsconfig \ set-log-publisher-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "File-Based Access Logger" \ --set filtering-policy:exclusive \ --trustAll \ --no-prompt  At this point, OpenDJ filters out connections over LDAPS to ports 1636 and 4444. While performing operations in OpenDJ control panel, if you perform a simple ldapsearch --port 1389 --baseDN dc=example,dc=com uid=bjensen cn, then all you see in the access log is the effect of the ldapsearch command: $ tail -f /path/to/opendj/logs/access
[19/Oct/2011:16:37:16 +0200] CONNECT conn=8 from=127.0.0.1:54165
to=127.0.0.1:1389 protocol=LDAP
[19/Oct/2011:16:37:16 +0200] SEARCH REQ conn=8 op=0 msgID=1
base="dc=example,dc=com" scope=wholeSubtree filter="(uid=bjensen)" attrs="cn"
[19/Oct/2011:16:37:16 +0200] SEARCH RES conn=8 op=0 msgID=1 result=0 nentries=1
etime=14
[19/Oct/2011:16:37:16 +0200] UNBIND REQ conn=8 op=1 msgID=2
[19/Oct/2011:16:37:16 +0200] DISCONNECT conn=8 reason="Client Unbind"


In addition to the filtering policy, you can also adjust how OpenDJ writes log messages. By default, OpenDJ writes one log message for a request, and another for a response. You can set the log publisher property log-format to combined to have OpenDJ write a single message per operation. This can be helpful, for example, when evaluating response times. In addition, you can change the log message time stamps with log-record-time-format, and specify whether to log LDAP control OIDs for operations by setting log-control-oids to true.

OpenDJ can send alerts to provide notifications of significant server events. Yet alert notifications are not enabled by default. You can use the dsconfig command to enable alert notifications:

$dsconfig \ set-alert-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "JMX Alert Handler" \ --set enabled:true \ --trustAll \ --no-prompt  OpenDJ can also send mail over SMTP instead of JMX notifications. Before you set up the SMTP-based alert handler, you must identify an SMTP server to which OpenDJ sends messages: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--set smtp-server:smtp.example.com \
--trustAll \
--no-prompt

$dsconfig \ create-alert-handler \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --handler-name "SMTP Alert Handler" \ --type smtp \ --set enabled:true \ --set message-subject:"OpenDJ Alert, Type: %%alert-type%%, ID: %%alert-id%%" \ --set message-body:"%%alert-message%%" \ --set recipient-address:kvaughan@example.com \ --set sender-address:opendj@example.com \ --trustAll \ --no-prompt  Alert Types OpenDJ directory server uses the following types when sending alerts. For alert types that indicate server problems, check OpenDJ/logs/errors for details. org.opends.server.AccessControlDisabled The access control handler has been disabled. org.opends.server.AccessControlEnabled The access control handler has been enabled. org.opends.server.authentiation.dseecompat.ACIParseFailed The dseecompat access control subsystem failed to correctly parse one or more ACI rules when the server first started. org.opends.server.BackendRunRecovery The pluggable backend has thrown a RunRecoveryException. The directory server needs to be restarted. org.opends.server.CannotCopySchemaFiles A problem has occurred while attempting to create copies of the existing schema configuration files before making a schema update, and the schema configuration has been left in a potentially inconsistent state. org.opends.server.CannotRenameCurrentTaskFile The directory server is unable to rename the current tasks backing file in the process of trying to write an updated version. org.opends.server.CannotRenameNewTaskFile The directory server is unable to rename the new tasks backing file into place. org.opends.server.CannotScheduleRecurringIteration The directory server is unable to schedule an iteration of a recurring task. org.opends.server.CannotWriteConfig The directory server is unable to write its updated configuration for some reason and therefore the server may not exhibit the new configuration if it is restarted. org.opends.server.CannotWriteNewSchemaFiles A problem has occurred while attempting to write new versions of the server schema configuration files, and the schema configuration has been left in a potentially inconsistent state. org.opends.server.CannotWriteTaskFile The directory server is unable to write an updated tasks backing file for some reason. org.opends.server.DirectoryServerShutdown The directory server has begun the process of shutting down. org.opends.server.DirectoryServerStarted The directory server has completed its startup process. org.opends.server.DiskFull Free disk space has reached the full threshold. Default is 20 MB. org.opends.server.DiskSpaceLow Free disk space has reached the low threshold. Default is 100 MB. org.opends.server.EnteringLockdownMode The directory server is entering lockdown mode, wherein only root users are allowed to perform operations and only over the loopback address. org.opends.server.LDAPHandlerDisabledByConsecutiveFailures Consecutive failures have occurred in the LDAP connection handler and have caused it to become disabled. org.opends.server.LDAPHandlerUncaughtError Uncaught errors in the LDAP connection handler that have caused it to become disabled. org.opends.server.LDIFBackendCannotWriteUpdate An LDIF backend was unable to store an updated copy of the LDIF file after processing a write operation. org.opends.server.LDIFConnectionHandlerIOError The LDIF connection handler encountered an I/O error that prevented it from completing its processing. org.opends.server.LDIFConnectionHandlerParseError The LDIF connection handler encountered an unrecoverable error while attempting to parse an LDIF file. org.opends.server.LeavingLockdownMode The directory server is leaving lockdown mode. org.opends.server.ManualConfigEditHandled The directory server detects that its configuration has been manually edited with the server online and those changes were overwritten by another change made through the server. The manually edited configuration will be copied to another location. org.opends.server.ManualConfigEditLost The directory server detects that its configuration has been manually edited with the server online and those changes were overwritten by another change made through the server. The manually edited configuration could not be preserved due to an unexpected error. org.opends.server.replication.UnresolvedConflict Multimaster replication cannot resolve a conflict automatically. org.opends.server.UncaughtException A directory server thread has encountered an uncaught exception that caused that thread to terminate abnormally. The impact that this problem has on the server depends on which thread was impacted and the nature of the exception. org.opends.server.UniqueAttributeSynchronizationConflict A unique attribute conflict has been detected during synchronization processing. org.opends.server.UniqueAttributeSynchronizationError An error occurred while attempting to perform unique attribute conflict detection during synchronization processing. [15] You can also configure the access logger to combine log messages by setting the property log-format:combined. The setting is useful when filtering messages based on response criteria. It causes the server to log one message per operation, rather than one message for the request and another for the response. Chapter 18. Tuning Servers For Performance This chapter suggests ways to measure and improve directory service performance. In this chapter you will learn to: • Define directory server performance goals operationally in accordance with the needs of client applications • Identify constraints that might limit achievable performance goals • Design and execute appropriate performance tests with the help of OpenDJ command-line tools • Adjust OpenDJ and system settings to achieve performance goals Server tuning refers to the art of adjusting server, JVM, and system configuration to meet the service-level performance requirements of directory clients. In the optimal case you achieve service-level performance requirements without much tuning at all, perhaps only setting JVM runtime options when installing OpenDJ. If you are reading this chapter, however, you are probably not facing an optimal situation. Instead you are looking for trade-offs that maximize performance for clients given the constraints of your deployment. 18.1. Defining Performance Requirements and Constraints Your key performance requirement is most likely to satisfy your users or customers with the resources available to you. Before you can solve potential performance problems, define what those users or customers expect, and determine what resources you will have to satisfy their expectations. 18.1.1. Service-Level Agreements Service-level agreement (SLA) is a formal name for what directory client applications and the people who run them expect from your service in terms of performance. SLAs might cover many aspects of the directory service. Whether or not your SLA is formally defined, you ought to know what is expected, or at least what you provide, in the following four areas: • Directory service response times Directory service response times range from less than a millisecond on average across a low latency connection on the same network to however long it takes your network to deliver the response. More important than average or best response times is the response time distribution, because applications set timeouts based on worst case scenarios. For example, a response time performance requirement might be defined as, Directory response times must average less than 10 milliseconds for all operations except searches returning more than 10 entries, with 99.9% of response times under 40 milliseconds. • Directory service throughput Directory service throughput can range up to many thousands of operations per second. In fact there is no upper limit for read operations such as searches, because only write operations must be replicated. To increase read throughput, simply add additional replicas. More important than average throughput is peak throughput. You might have peak write throughput in the middle of the night when batch jobs update entries in bulk, and peak binds for a special event or first thing Monday morning. For example, a throughput performance requirement might be expressed as, The directory service must sustain a mix of 5,000 operations per second made up of 70% reads, 25% modifies, 3% adds, and 2% deletes. Even better is to mimic the behavior of key operations for performance testing, so that you understand the patterns of operations in the throughput you need to provide. • Directory service availability OpenDJ is designed to let you build directory services that are basically available, including during maintenance and even upgrade of individual servers. Yet, in order to reach very high levels of availability, you must make sure not only that the software is designed for availability, but also that your operations execute in such a way as to preserve availability. Availability requirements can be as lax as best effort, or as stringent as 99.999% or more uptime. Replication is the OpenDJ feature that allows you to build a highly available directory service. • Directory service administrative support Be sure to understand how you support your users when they run into trouble. While directory services can help you turn password management into a self-service visit to a web site, some users still need to know what they can expect if they need your help. Creating an SLA, even if your first version consists of guesses, helps you reduce performance tuning from an open-ended project to a clear set of measurable goals for a manageable project with a definite outcome. 18.1.2. Available Resources With your SLA in hand, inventory the server, networks, storage, people, and other resources at your disposal. Now is the time to estimate whether it is possible to meet the requirements at all. If, for example you are expected to serve more throughput than the network can transfer, maintain high-availability with only one physical machine, store 100 GB of backups on a 50 GB partition, or provide 24/7 support all alone, no amount of tweaking available resources is likely to fix the problem. When checking that the resources you have at least theoretically suffice to meet your requirements, do not forget that high availability in particular requires at least two of everything to avoid single points of failure. Be sure to list the resources you expect to have, when and how long you expect to have them, and why you need them. Also make note of what is missing and why. In addition to the suggestions in this section, also read Section 2.6, "Hardware" in the OpenDJ Release Notes. 18.1.2.1. Server Hardware Recommendations OpenDJ runs on systems with Java support, and is therefore very portable. OpenDJ tends to perform best on single-board, x86 systems due to low memory latency. 18.1.2.2. Advice Concerning Storage High-performance storage is essential for handling high-write throughput. When the database stays fully cached in memory, directory read operations do not result in disk I/O. Only writes result in disk I/O. You can further improve write performance by using solid-state disks for persistent storage, or for file system cache. Important OpenDJ directory server is designed to work with local storage for database backends. Do not use network file systems, such as NFS, where there is no guarantee that a single process has access to files. Storage area networks (SANs) and attached storage are fine for use with OpenDJ directory server. Regarding database size on disk, sustained write traffic can cause the database to grow to more than twice its initial size on disk. This is normal behavior. The size on disk does not impact the DB cache size requirements. In order to avoid directory database file corruption after crashes or power failures on Linux systems, enable file system write barriers and make sure that the file system journaling mode is ordered. For details on how to enable write barriers and how to set the journaling mode for data, see the options for your file system in the mount command manual page. 18.2. Testing Performance Even if you do not need high availability, you still need two of everything, because your test environment needs to mimic your production environment as closely as possible if you want to avoid unwelcome surprises. In your test environment, you set up OpenDJ as you will later in production, and then conduct experiments to determine how best to meet the requirements defined in the SLA. Use the make-ldif command, described in make-ldif(1) in the OpenDJ Reference, to generate sample data that match what you expect to find in production. The OpenDJ LDAP Toolkit provides command-line tools to help with basic performance testing: • The addrate command measures add and delete throughput and response time. • The authrate command measures bind throughput and response time. • The modrate command measures modification throughput and response time. • The searchrate command measures search throughput and response time. All these commands show you information about the response time distributions, and allow you to perform tests at specific levels of throughput. If you need additional precision when evaluating response times, use the global configuration setting etime-resolution, to change elapsed processing time resolution from milliseconds (default) to nanoseconds: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--set etime-resolution:nanoseconds \
--trustAll \
--no-prompt


18.3. Tweaking OpenDJ Performance

When your tests show that OpenDJ performance is lacking even though you have the right underlying network, hardware, storage, and system resources in place, you can tweak OpenDJ performance in a number of ways. This section covers the most common tweaks.

18.3.1. Maximum Open Files

OpenDJ needs to be able to open many file descriptors, especially when handling thousands of client connections. Linux systems in particular often set a limit of 1024 per user, which is too low to handle many client connections to OpenDJ.

When setting up OpenDJ for production use, make sure OpenDJ can use at least 64K (65536) file descriptors. For example, when running OpenDJ as user opendj on a Linux system that uses /etc/security/limits.conf to set user level limits, you can set soft and hard limits by adding these lines to the file:

opendj soft nofile 65536
opendj hard nofile 131072

The example above assumes the system has enough file descriptors available overall. You can check the Linux system overall maximum as follows:

$cat /proc/sys/fs/file-max 204252 18.3.2. Java Settings Default Java settings let you evaluate OpenDJ using limited system resources. If you need high performance for production system, test with the following JVM options. These apply to the Sun/Oracle JVM. Tip To apply JVM settings for your server, edit config/java.properties, and apply the changes with the dsjavaproperties command, described in dsjavaproperties(1) in the OpenDJ Reference: -server Use the C2 compiler and optimizer (HotSpot Server VM). -d64 Use this option on 64-bit systems for heaps larger than 3.5 GB. -Xms, -Xmx Set both minimum and maximum heap size to the same value to avoid resizing. Leave space for the entire DB cache and more. Use at least a 2 GB heap (-Xms2G -Xmx2G) unless your data set is small. -Xmn Set the new generation size between 1-4 GB for high-throughput deployments, but leave enough overall JVM heap to avoid overlaps with the space used for DB cache. -XX:MaxTenuringThreshold=1 Force OpenDJ directory server to only create objects that have either a short lifetime, or a long lifetime. -XX:NewSize If OpenDJ directory server handles high throughput, set the new generation size large enough for the JVM to avoid promoting short-lived objects into the old generation space (-XX:NewSize=512M). -XX:+UseConcMarkSweepGC The CMS garbage collector tends to give the best performance characteristics with the lowest garbage collection pause times. Consider using the G1 garbage collector only if CMS performance characteristics do not fit your deployment, and testing shows G1 performs better. -XX:+UseCompressedOops Set this option when you have a 64-bit JVM, and -Xmx less than 32 GB. Java object pointers normally have the same size as native machine pointers. If you run a small 64-bit JVM, then compressed object pointers can save space. -XX:+PrintGCDetails, -XX:+PrintGCTimeStamps Use these options when diagnosing JVM tuning problems. You can turn them off when everything is running smoothly. 18.3.3. Data Storage Settings By default, OpenDJ compresses attribute descriptions and object class sets to reduce data size. This is called compact encoding. By default, OpenDJ does not, however, compress entries stored in its backend database. If your entries hold values that compress well—such as text— you can gain space by setting the backend property entries-compressed, to true before you (re-)import data from LDIF. With entries-compressed: true OpenDJ compresses entries before writing them to the database:[16] $ dsconfig \
set-backend-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--backend-name userRoot \
--set entries-compressed:true \
--trustAll \
--no-prompt

$import-ldif \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --ldifFile /path/to/Example.ldif \ --backendID userRoot \ --includeBranch dc=example,dc=com \ --start 0 Import task 20120917100628767 scheduled to start Sep 17, 2012 10:06:28 AM CEST  If write traffic to your directory service occurs in short bursts, and you use database backends of type pdb, you can potentially improve short-term performance during the bursts by increasing the db-checkpointer-wakeup-interval setting. This setting specifies the maximum length of time between attempts to write a checkpoint to the journal. Longer intervals allow more updates to accumulate in buffers before they are required to be written to disk. The transaction log is still written to disk, but the modified pages are kept in memory longer before being written. Longer intervals potentially cause recovery from an abrupt termination to take more time. 18.3.4. LDIF Import Settings You can tweak OpenDJ to speed up import of large LDIF files. By default, the temporary directory used for scratch files is import-tmp under the directory where you installed OpenDJ. Use the import-ldif command, described in import-ldif(1) in the OpenDJ Reference, with the --tmpdirectory option to set this directory to a tmpfs file system, such as /tmp. If you are certain your LDIF contains only valid entries with correct syntax, because the LDIF was exported from OpenDJ with all checks active, for example, you can skip schema and DN validation. Use the --skipSchemaValidation and --skipDNValidation options with the import-ldif command to skip validation. 18.3.5. Database Cache Settings Database cache size is, by default, set as a percentage of the JVM heap by using the backend property db-cache-percent. Alternatively, you use the backend property db-cache-size, to set the size. If you set up multiple database backends, the total percent of JVM heap used must remain less than 100, and must leave space for other uses. Default settings work for servers with one user data backend JVM heaps up to 2 GB. For heaps larger than 2 GB, you can allocate a larger percentage of heap space to DB cache. Depending on the size of your database, you have a choice to make about database cache settings: • By caching the entire database in the JVM heap, you can get more deterministic response times and limit disk I/O. Yet, caching the whole DB can require a very large JVM. Database backends of type pdb allocate all of the cache memory at startup. • By allowing file system cache to hold the portion of database that does not fit in the DB cache, you trade less deterministic and slightly slower response times for a smaller JVM heap. How you configure the file system cache depends on your operating system. 18.3.6. Caching Large, Frequently Used Entries OpenDJ implements an entry cache designed for deployments with a few large entries that are regularly updated or accessed. The common use case is a deployment with a few large static groups that are updated or accessed regularly. An entry cache is used to keep such groups in memory in a format that avoids the need to constantly read and deserialize the large entries. When configuring an entry cache, take care to include only the entries that need to be cached by using the configuration properties include-filter and exclude-filter. The memory devoted to the entry cache is not available for other purposes. The following example adds a Soft Reference entry cache to hold entries that match the filter (ou=Large Static Groups). A Soft Reference entry cache allows cached entries to be released if the JVM is running low on memory. A Soft Reference entry cache has no maximum size setting, so the number of entries cached is limited only by the include-filter and exclude-filter settings: $ dsconfig \
create-entry-cache \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--cache-name "Large Group Entry Cache" \
--type soft-reference \
--set cache-level:1 \
--set include-filter:"(ou=Large Static Groups)" \
--set enabled:true \
--trustAll \
--no-prompt


The entry cache configuration takes effect when the entry cache is enabled.

18.3.7. Logging Settings

Debug logs trace the internal workings of OpenDJ, and therefore generally should be used sparingly, especially in high performance deployments.

In general leave other logs active for production environments to help troubleshoot any issues that arise.

For OpenDJ servers handling very high throughput, however, such as 100,000 operations per second or more, the access log constitute a performance bottleneck, as each client request results in multiple access log messages. Consider disabling the access log in such cases:

$dsconfig \ set-log-publisher-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "File-Based Access Logger" \ --set enabled:false \ --trustAll \ --no-prompt  [16] OpenDJ does not proactively rewrite all entries in the database after you change the settings. Instead, to force OpenDJ to compress all entries, import the data from LDIF. Chapter 19. Securing and Hardening OpenDJ Directory Server By default OpenDJ directory server is set up for ease of evaluation and deployment. When you deploy OpenDJ in production, there are specific precautions you should take to minimize risks. This chapter recommends the key precautions to take. In this chapter you will learn to: • Set up a special system account for OpenDJ directory server, and appropriately protect access to directory server files • Enforce use of the latest Java security updates • Enable only directory services that are actually used • Use appropriate log configuration, global access control, password storage, and password policy settings • Avoid overuse of the default directory root user account • Use appropriate global access control settings • Secure connections to the directory After following the recommendations in this chapter, make sure that you test your installation to verify that it behaves as expected before putting the server into production. 19.1. Setting Up a System Account for OpenDJ Directory Server Do not run OpenDJ directory server as the system superuser (root). When applications run as superuser, the system effectively does not control their actions. When running the server as superuser, a bug in the server could affect other applications or the system itself. After setting up a system account for the server, and using that account only to run OpenDJ directory server, you can use system controls to limit user access. The user running OpenDJ directory server must have access to use the configured ports. Make sure you configure the system to let the user access privileged ports such as 389 and 636 if necessary. Make sure you configure the firewall to permit access to the server ports. The user running OpenDJ directory server must have access to all server files, including configuration files, data files, log files, keystores, truststores and their password files, and other files. By default OpenDJ lets users in the same group as the user running the server read server files, though not directory data files. The user running OpenDJ directory server does not, however, need access to login from a remote system or to perform actions unrelated to OpenDJ. Set up the user account to prevent other users from reading configuration files. On UNIX, set an appropriate umask such as 027 to prevent users in other groups from accessing server files. On Windows, use file access control to do the same. Do consider letting all users to run command-line tools. What a user can do with tools depends on server access control mechanisms. On UNIX and Linux, the group for the user running OpenDJ directory server has access by default to read files, including log files. You can restrict this after installation by setting the log-file-permissions property on each active log publisher. You can create a UNIX service script to start the server at system startup and stop the server at system shutdown by using the create-rc-script command. For details see create-rc-script(1) in the OpenDJ Reference. You can use the windows-service command to register OpenDJ directory server as a Windows service. For details see windows-service(1) in the OpenDJ Reference. 19.2. Install and Use Java Security Updates Security updates are occasionally released for the Java runtime environment. Make sure that your operational plans provide for deploying Java security updates to systems where you run OpenDJ software. After you update the Java runtime environment, change the Java version the OpenDJ software uses. To do this, edit the default.java-home setting in the file /path/to/opendj/config/java.properties to use the path to the update release, and then use the dsjavaproperties command for the changes to be taken into account. Then restart OpenDJ directory server. For details see dsjavaproperties(1) in the OpenDJ Reference. 19.3. Only Enable Necessary Services By default, OpenDJ directory server enables an LDAP connection handler and an administration connector. If the LDAP connection handler is not used, either because only LDAPS is used or because applications access directory data only over HTTPS, then set the LDAP connection handler property to enabled:false by using the dsconfig set-connection-handler-prop command. Likewise, if you have enabled other connection handlers that are not used, you can also disable them by using the dsconfig command. Use the status command to check which connection handlers are enabled. 19.4. Configure Logging Appropriately By default, OpenDJ directory server writes log messages to files when an error is encountered and when the server is accessed. Access logs tend to be much more intensively updated than error logs. You can also configure debug logging, generally too verbose for continuous use in production, and audit logging, which uses the access log mechanism to record changes. Debug and audit logs are not enabled by default. For details, see Section 17.5, "Server Logs". The default OpenDJ directory server error log levels and log rotation and retention policies are set to prevent the logs from harming performance or filling up the disk while still making it possible to perform basic troubleshooting. If you must set a more verbose error log level or if you must activate debug logging on a production system for more advanced troubleshooting, be aware that extra logging can negatively impact performance and generate large files on heavily used servers. When finished troubleshooting, reset the log configuration for more conservative logging. The audit log in OpenDJ directory server is not for security audits. Instead it records changes in LDIF. The audit log is intended to help you as server administrator to diagnose problems in the way applications change directory data. For change notification as a service, use the external change log instead. For details about the external change log, see Section 8.4, "Change Notification For Your Applications". 19.5. Limit Use of the cn=Directory Manager Account Directory root DN accounts are stored in the server configuration under cn=Root DNs,cn=config. In order to bootstrap the system, the default root DN administrator, cn=Directory Manager, is not subject to access control and has privileges to perform almost every administrative operation, including changing privileges. Use this account like you use the superuser (root) account on UNIX or the Administrator account on Windows: Use it only when you must. Instead of allowing other applications to perform operations as the root DN administrator cn=Directory Manager, either create alternative root DN administrators with limited privileges, or explicitly assign directory administrator rights to specific accounts. When creating alternative root DN administrators, you can limit their inherited privileges to prevent them from inheriting bypass-acl and privilege-change privileges. For an example of how to do this see Procedure 6.3, "To Add Privileges for a Group of Administrators". To explicitly assign rights to specific accounts, create a directory administrator group and add administrators as members. Use the group to assign privileges to the administrators. For details see Procedure 6.3, "To Add Privileges for a Group of Administrators". Create multiple administrator groups if necessary for your deployment. In both cases, explicitly set up access control instructions (ACIs) to allow administrators to perform administrative actions. For details see Chapter 6, "Configuring Privileges and Access Control". This prevents administrators from accidentally or intentionally overstepping their authority when managing directory servers and directory data, and you make it easier to audit what administrators can do. 19.6. Reconsider Default Global ACIs Global ACIs are defined in the directory server configuration. Global ACIs apply whenever no other ACIs take precedence. Default global ACIs allow applications to: • Read the root DSE • Read directory server schema • Read directory data anonymously • Modify one's own entry • Request extended operations and operations with certain controls For details, see Table 6.1, "Default Global ACIs". If the default global ACIs do not match your requirements, make sure you change them on each server as the server configuration data is not replicated. Global ACIs have the same syntax as ACIs in the directory data. For details about ACIs, see Chapter 6, "Configuring Privileges and Access Control". Default global ACIs can and often do change between releases. Review the release notes when upgrading to a new release. For details, see Chapter 3, "OpenDJ Compatibility" in the OpenDJ Release Notes. Generally it is fine to allow applications at least to read the root DSE and schema operational attributes, to request the StartTLS extended operation over a cleartext connection, even if read access to most directory data requires authorization. The operational attributes on the root DSE indicate the server capabilities, allowing applications to discover interactively how to use the server. The schema operational attributes describe the data stored in the directory. The StartTLS extended operation lets an application initiate a secure session starting on a port that does not require encryption. Procedure 19.1. To Minimize Global ACIs Follow these steps to minimize global ACIs: 1. Remove existing global ACIs to prevent all access. $ dsconfig \
set-access-control-handler-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--reset global-aci \
--trustAll \
--no-prompt

2. Allow limited global access for essential operations.

This example allows the following limited access:

• Authenticated users can request the ForgeRock Transaction ID control, which has OID 1.3.6.1.4.1.36733.2.1.5.1.

Other components in the ForgeRock platform use this control to share transaction IDs for common access logging.

If you do not use common access logging, do not add the global ACI for Transaction ID control access.

• Anonymous users can request the Get Symmetric Key extended operation, which has OID 1.3.6.1.4.1.26027.1.6.3, and the StartTLS extended operation, which has OID 1.3.6.1.4.1.1466.20037.

OpenDJ directory server requires Get Symmetric Key extended operation access to create and share secret keys for encryption.

Directory client applications must be able to use the StartTLS operation to initiate a secure connection with an LDAP connection handler. This must be available to anonymous users so that applications can initiate a secure connection before sending bind credentials to authenticate, for example.

If the directory deployment does not support StartTLS, then remove  || 1.3.6.1.4.1.1466.20037 from the global ACI for Anonymous extended operation access.

• Anonymous and authenticated users can read information about the LDAP features that OpenDJ directory server supports according to the global ACI named User-Visible Root DSE Operational Attributes.

This exposes metadata publicly for the following attributes:

namingContexts

The base DNs for user data

supportedAuthPasswordSchemes

Supported authPassword storage schemes for pre-encoded passwords

supportedControl

Supported LDAP controls by OID

supportedExtension

Supported LDAP extended operations by OID

supportedFeatures

Supported optional LDAP features by OID

supportedLDAPVersion

Supported LDAP versions

supportedSASLMechanisms

Supported SASL mechanisms

supportedTLSCiphers

Supported cipher suites for transport layer security

supportedTLSProtocols

Supported protocols for transport layer security

vendorName

Name of the LDAP server implementer

vendorVersion

Version of the LDAP server implementation

$dsconfig \ set-access-control-handler-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --add global-aci:"(targetcontrol=\"1.3.6.1.4.1.36733.2.1.5.1\")\ (version 3.0; acl \"Transaction ID control access\"; allow(read)\ userdn=\"ldap:///all\";)" \ --add global-aci:"(extop=\"1.3.6.1.4.1.26027.1.6.3 || 1.3.6.1.4.1.1466.20037\") \ (version 3.0; acl \"Anonymous extended operation access\";\ allow(read) userdn=\"ldap:///anyone\";)" \ --add global-aci:"(target=\"ldap:///\")(targetscope=\"base\")\ (targetattr=\"objectClass||namingContexts||supportedAuthPasswordSchemes\ ||supportedControl||supportedExtension||supportedFeatures||supportedLDAPVersion\ ||supportedSASLMechanisms||supportedTLSCiphers||supportedTLSProtocols||\ vendorName||vendorVersion\")(version 3.0;\ acl \"User-Visible Root DSE Operational Attributes\";\ allow (read,search,compare) userdn=\"ldap:///anyone\";)" \ --add global-aci:"(target=\"ldap:///cn=schema\")(targetscope=\"base\")\ (targetattr=\"objectClass||attributeTypes||dITContentRules||dITStructureRules\ ||ldapSyntaxes||matchingRules||matchingRuleUse||nameForms||objectClasses\")\ (version 3.0; acl \"User-Visible Schema Operational Attributes\";\ allow (read,search,compare) userdn=\"ldap:///anyone\";)" \ --trustAll \ --no-prompt  3. Add or update global ACIs as required by known client applications. Work with your partners and with client application documentation for details. For example, OpenAM servers might require access to update schema definitions under cn=schema, and to use the Persistent Search control. The following capabilities are useful with the REST to LDAP gateway: Access to Read Entry controls By default, the OpenDJ REST to LDAP gateway uses the Pre-Read (OID: 1.3.6.1.1.13.1) and Post-Read (OID: 1.3.6.1.1.13.2) controls to read an entry before it is deleted, or to read an entry after it is added or modified. To determine whether access to request the controls is required by the deployment, check the configuration for readOnUpdatePolicy as described in Section A.2, "Gateway REST2LDAP Configuration File" in the OpenDJ Reference. Access to the Subtree Delete control By default, the OpenDJ REST to LDAP gateway uses the LDAP Subtree Delete (OID: 1.2.840.113556.1.4.805) control for delete operations. To determine whether access to request the controls is required by the deployment, check the configuration for useSubtreeDelete as described in Section A.2, "Gateway REST2LDAP Configuration File" in the OpenDJ Reference. Access to the Permissive Modify control By default, the OpenDJ REST to LDAP gateway uses the LDAP Permissive Modify (OID: 1.2.840.113556.1.4.1413) control for LDAP modify operations resulting from patch and update operations. To determine whether access to request the controls is required by the deployment, check the configuration for usePermissiveModify as described in Section A.2, "Gateway REST2LDAP Configuration File" in the OpenDJ Reference. The following example adds control access for OpenDJ REST to LDAP gateway with a default configuration: $ dsconfig \
set-access-control-handler-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
||1.2.840.113556.1.4.805||1.2.840.113556.1.4.1413\")\
(version 3.0; acl \"REST to LDAP control access\"; allow(read) userdn=\"ldap:///all\";)" \
--trustAll \
--no-prompt



19.7. Protect Directory Server Network Connections

Directory server protocols like LDAP, HTTP, JMX, and replication rely on transport layer security to protect network connections. For evaluation and initial testing you might find it useful to be able to inspect the network traffic without decrypting messages. For final testing and production environments, secure the connections.

Transport layer security depends on public key infrastructure when negotiating encryption. OpenDJ directory server has multiple keystores and truststores for handling the key pairs and public key certificates as described in Chapter 20, "Changing Server Certificates".

OpenDJ directory server can simplify installation by self-signing certificates for server key pairs. Self-signed certificates are not recognized by applications until you add them to the application's truststore. This is not a problem when you control both the service and the applications. Self-signed certificates are generally fine even in production systems for administrative and replication connections not used by other applications. For connection handlers that primarily serve applications you do not control, have the server public key certificate signed by a well-known CA so that the applications can recognize the certificate by default. For details on setting up connection handlers for secure communications, see Chapter 5, "Configuring Connection Handlers".

You can use an ACI to require secure communications for most operations. Keep a global ACI that allows anonymous access to request the StartTLS extended operation. For all operations other than requesting StartTLS, use ACIs whose subject sets authmethod = ssl, and also sets ssf appropriately.

A security strength factor (ssf) is set when the server negotiates connection security with a client application. The ssf setting in an ACI subject indicates acceptable security strength factors for the target operation. The server can then check whether the security strength factor for the connection is acceptable according to ACIs that apply. The ssf setting in an ACI takes an integer between 0 and 1024. ssf = 0 (or not set) means cleartext is acceptable. ssf = 1 calls for integrity protection, meaning the connection should prevent messages from being corrupted between the sender and the receiver. ssf >= integer where integer is two or more calls for integrity and confidentiality protection. Confidential messages are encrypted. Integers larger than one reflect the effective key size of the cipher negotiated between OpenDJ directory server and the LDAP client application. With the ssf setting, the aim is to achieve a balance. If not set, or set too low, the server and client can negotiate a connection that is not secure. If set too high, the server and some clients might not be able to negotiate connection settings at all.

When OpenDJ directory server and a client application negotiate connection security, they must agree on a security protocol and cipher suite. By default OpenDJ directory server supports all the SSL and TLS protocols and the cipher suites supported by the underlying Java virtual machine. The list can include protocols and ciphers that are not secure enough for the production environment. You can limit the security protocols and ciphers to those that are secure enough. For an example of how to change the settings for a connection handler, see Section 5.6, "TLS Protocols and Cipher Suites". You can also change the settings on the administration connector with the dsconfig set-administration-connector-prop command, and change the settings for replication by changing the crypto manager settings with the dsconfig set-crypto-manager-prop command.

19.8. Use Appropriate Password Storage and Password Policies

Make sure you keep passwords secret in production. OpenDJ directory server configuration includes files that hold passwords. Command-line tools allow users to provide password credentials. Passwords are also stored in directory data. This section looks at how to protect passwords in each situation.

19.8.1. Passwords in Configuration Files

OpenDJ directory server stores passwords in configuration files.

The config.ldif file stores hashes of the passwords for root DN users, such as cn=Directory Manager. Likewise for replicated servers the admin-backend.ldif file stores a password hash for the global administrator, such as cn=admin,cn=Administrators,cn=admin data. By default the password storage algorithm is Salted SHA512, a salted form of the 512-bit SHA-2 message digest algorithm. Permissions on the current copy of the file make it readable and writable only by the user running the server. A backup copy of the version used for the latest successful server startup, config.ldif.startok, can be readable to other users depending on the UNIX umask or Windows access control. Use a storage scheme that protects the passwords in server configuration files.

By default OpenDJ directory server stores passwords for keystores and truststores in configuration files with .pin extensions. These files contain the cleartext, randomly generated passwords. Keep the PIN files readable and writable only by the user running the server. Alternatively, you can use the dsconfig command to configure the server to store keystore and truststore passwords in environment variables or Java properties if your procedures make these methods more secure in production. The settings to change are those of the Key Manager Providers and Trust Manager Providers.

19.8.2. Passwords as Command-Line Arguments

OpenDJ commands supply credentials for any operations that are not anonymous. Password credentials can be supplied as arguments such as the --bindPassword password option shown in many of the examples in the documentation. The passwords for keystores and truststores are handled in the same way. This is not recommended in production as the password appears in the command. Passwords can also be supplied interactively by using a - in the commands, as in --bindPassword -. The following example demonstrates a password supplied interactively:

$ldapsearch \ --bindDN "cn=Directory Manager" \ --bindPassword - \ --port 1389 \ --hostname opendj.example.com \ --baseDN cn=config \ "(cn=Directory Manager)" \ userPassword Password for user 'cn=Directory Manager': dn: cn=Directory Manager,cn=Root DNs,cn=config userPassword: {SSHA512}WiYWHyAa612EZwCMY7uGwN/WYp2Ne7EmV0QTPX5g6RrTKi8jZX3u5rBIW OUY1DPK3TGYqDiF7d/BEhHnIjBmBtkotWkHIKMa  Notice that the password appears neither in the shell history, nor in the terminal session. When using scripts where the password cannot be supplied interactively, passwords can be read from files. For example, the --bindPasswordFile file option takes a file that should be readable only by the user running the command. It is also possible to set passwords in the tools.properties file for the user. This file is located in the user's home directory, on UNIX ~/.opendj/tools.properties, and on Windows, typically C:\Documents and Settings\username\.opendj\tools.properties, though the location can depend on the Java runtime environment used. Here as well, make sure that the file is readable only by the user. Alternatively use other approaches that work with scripts such as Java properties or environment variables, depending on what method is most secure in production. 19.8.3. Passwords in Directory Data OpenDJ directory server encodes users' passwords before storing them. A variety of built-in password storage schemes are available, using either one-way (hash) or reversible algorithms. The default storage schemes use one-way algorithms to make it computationally difficult to recover the cleartext password values even when given full access to the files containing stored password values. For details see Section 10.5, "Configuring Password Storage". In OpenDJ directory server, password policies govern password storage schemes, valid password values, password term duration, account lockout, and others. For example you can configure password policies that prevent users from setting weak passwords and from reusing passwords. OpenDJ provides a wide range of alternatives. For details see Chapter 10, "Configuring Password Policy". 19.9. Protect OpenDJ Directory Server Files By default, OpenDJ directory server does not encrypt directory server files or directory data. The only attribute values stored in encrypted or digest form are passwords. For instructions on encrypting entries and index content, see Section 4.5, "Encrypting Directory Data". For instructions on encrypting change log content, see Procedure 8.14, "To Encrypt External Change Log Data". If you set up an appropriate user account for the server as described in Section 19.1, "Setting Up a System Account for OpenDJ Directory Server", and unpacked the server files as that user, then the system should prevent other users from having overly permissive access to directory server files. Included in the files that directory server does not encrypt are LDIF exports of directory data. LDIF export files are readable and writable depending on the UNIX umask or Windows file access control settings for the user who runs the command to export the LDIF. The export-ldif command can compress the LDIF, but does not have an option for encrypting LDIF. Directory backup archives can be encrypted, but are not encrypted by default. Backup archive file permissions depend on the UNIX umask or Windows file access control settings. When using the backup command, run an online backup and supply the --encrypt option as shown in the following example: $ backup \
--port 4444 \
--bindDN "cn=Directory Manager" \
--backupAll \
--backupDirectory /path/to/opendj/bak \
--encrypt \
--start 0
Password for user 'cn=Directory Manager':
Backup task 20150810105606755 scheduled to start ...


The server uses its Crypto Manager configuration to determine how to encrypt the backup archive data. The --encrypt option is not available for offline back up. If you back up server data offline, plan to protect the files separately.

Chapter 20. Changing Server Certificates

This chapter covers how to replace OpenDJ key pairs and public key certificates. In this chapter you will learn to:

• Replace a key pair for securing a connection handler

• Replace a key pair used for replication

OpenDJ uses keystores (for private keys) and truststores (for public, signed certificates). Up to three sets of keystores are used, as shown in the following illustration.

OpenDJ uses different sets of public and private keys for different secure connections.

By default the keystores are located in the /path/to/opendj/config directory:

• The keystore and truststore hold keys for securing connections with client applications.

• The admin-keystore and admin-truststore hold keys for securing administrative connections, such as those used when connecting with the dsconfig command.

• The ads-truststore holds keys for securing replication connections with other OpenDJ servers in the replication topology.

Each keystore has a specific purpose:

admin-keystore

This Java Keystore holds the private key and administrative certificate for the server, admin-cert. This key pair is used to protect communications on the administration port. The password, stored in admin-keystore.pin, is also the key password for admin-cert.

admin-truststore

This Java Keystore holds a copy of the administrative certificate, admin-cert. The password is the same as for the admin-keystore, in other words the string in admin-keystore.pin.

ads-truststore

This Java Keystore holds public key certificates of all servers replicating with the current server. It also includes the ads-certificate key pair of the current server. The password is stored in ads-truststore.pin.

Do not change this keystore directly.

keystore

This Java Keystore holds the private key and server certificate, server-cert, used to protect TLS/SSL communications with client applications. The password, stored in keystore.pin, is also the key password for server-cert.

truststore

This Java Keystore holds a copy of the server-cert certificate from the keystore. This is also where you import certificates of client applications if you want OpenDJ to recognize them. The password is the same as for the keystore, in other words the string in keystore.pin.

Tip

Examples in this chapter use self-signed certificates, but you can also use certificates signed by a Certificate Authority (CA).

When importing a certificate (keytool -import) signed by a well-known CA, use the -trustcacerts option to trust the CA certificates delivered with the Java runtime environment.

Procedure 20.1. To Replace a Server Key Pair

This procedure shows how to replace a server key pair in the admin-keystore and copy of the administrative certificate in admin-truststore.

The examples also apply when replacing a key pair in the keystore and copy of the server certificate in truststore. Just adapt the commands to use the correct keystore, truststore, and PIN file names.

This procedure does not apply for replication key pairs. Instead, see Procedure 20.2, "To Replace the Key Pair Used for Replication".

1. Check the alias of the key pair and certificate copy to replace:

$cd /path/to/opendj/config$ keytool -list -keystore admin-keystore -storepass cat admin-keystore.pin

Keystore type: JKS
Keystore provider: SUN

Your keystore contains 1 entry

admin-cert, May 20, 2015, PrivateKeyEntry,
Certificate fingerprint (SHA1): 21:9F:F0:E8:A3:22:A3:62:1D:C7:04:BD:12:44:A6:FA:0C:3F:3A:35
$keytool -list -keystore admin-truststore -storepass cat admin-keystore.pin Keystore type: JKS Keystore provider: SUN Your keystore contains 1 entry admin-cert, May 20, 2015, trustedCertEntry, Certificate fingerprint (SHA1): 21:9F:F0:E8:A3:22:A3:62:1D:C7:04:BD:12:44:A6:FA:0C:3F:3A:35  This alias is also stored in the server configuration. 2. Remove the key pair and certificate copy to replace: $ keytool \
-delete \
-storepass cat admin-keystore.pin

$keytool \ -delete \ -alias admin-cert \ -keystore admin-truststore \ -storepass cat admin-keystore.pin  3. Generate a new key pair in the keystore: $ keytool \
-genkey \
-keyalg RSA \
-validity 7300 \
-keysize 2048 \
-ext "san=dns:opendj.example.com" \
-dname "CN=opendj.example.com, O=Administration Connector Self-Signed Certificate" \
-storepass cat admin-keystore.pin \
-keypass cat admin-keystore.pin


Notice that the -alias option takes the same alias as before. This is because the ssl-cert-nickname for the Administration Connector is configured as admin-cert. Also, the -dname option has a CN value corresponding to the fully qualified domain name of the host where OpenDJ directory server is running.

4. Get the new key pair's certificate signed, using one of the following alternatives:

• Self-sign the certificate:

$keytool \ -selfcert \ -alias admin-cert \ -validity 7300 \ -keystore admin-keystore \ -storepass cat admin-keystore.pin  • Create a certificate signing request, have it signed by a CA, and import the signed certificate from the CA reply. For examples of the keytool commands to use, see Procedure 5.2, "To Request and Install a CA-Signed Certificate". 5. Export a copy of the certificate from the keystore: $ keytool \
-export \
-storepass cat admin-keystore.pin \
Certificate stored in file <admin-cert.crt>

6. Import the copy of the certificate into the truststore:

$keytool \ -import \ -alias admin-cert \ -keystore admin-truststore \ -storepass cat admin-keystore.pin \ -file admin-cert.crt Owner: CN=opendj.example.com, O=Administration Connector Self-Signed Certificate Issuer: CN=opendj.example.com, O=Administration Connector Self-Signed Certificate Serial number: 4cdd42a Valid from: Thu May 28 11:32:05 CEST 2015 until: Wed May 23 11:32:05 CEST 2035 Certificate fingerprints: MD5: 40:38:24:5D:DD:BE:EC:D6:07:56:08:25:95:D9:61:FE SHA1: BC:3D:A9:26:CD:4E:71:04:44:16:1E:A5:79:DA:43:2A:65:E8:85:85 SHA256: D3:41:EE:44:5A:54:74:11:5A:...:9F:8F:08:13:09:DD:71:52:7E:35:66:7E Signature algorithm name: SHA256withRSA Version: 3 Extensions: #1: ObjectId: 2.5.29.17 Criticality=false SubjectAlternativeName [ DNSName: opendj.example.com ] #2: ObjectId: 2.5.29.14 Criticality=false SubjectKeyIdentifier [ KeyIdentifier [ 0000: 08 E3 D3 62 AA 68 E6 02 52 25 F8 22 C4 43 82 2D ...b.h..R%.".C.- 0010: 20 C1 39 99 .9. ] ] Trust this certificate? [no]: yes Certificate was added to keystore  7. Restart OpenDJ to make sure it reloads the keystores: $ cd /path/to/opendj/bin
$stop-ds --restart  8. If you have client applications trusting the self-signed certificate, have them import the new one (admin-cert.crt in this example). Procedure 20.2. To Replace the Key Pair Used for Replication Follow these steps to replace the key pair that is used to secure replication connections. 1. Generate a new key pair for the server. The changes you perform are replicated across the topology. OpenDJ has an ads-certificate and private key, which is a local copy of the key pair used to secure replication connections. To generate the new key pair, you remove the ads-certificate key pair, prompt OpenDJ to generate a new ads-certificate key pair, and then add a copy to the administrative data using the MD5 fingerprint of the certificate to define the RDN. 1. Delete the ads-certificate entry: $ ldapmodify \
--port 1389 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
changetype: delete

DELETE operation successful for DN ds-cfg-key-id=ads-certificate,

2. Prompt OpenDJ to generate a new, self-signed ads-certificate key pair.

You do this by adding an ads-certificate entry with object class ds-cfg-self-signed-cert-request:

$ldapmodify \ --port 1389 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password dn: ds-cfg-key-id=ads-certificate,cn=ads-truststore changetype: add objectclass: ds-cfg-self-signed-cert-request Processing ADD request for ds-cfg-key-id=ads-certificate,cn=ads-truststore ADD operation successful for DN ds-cfg-key-id=ads-certificate,cn=ads-truststore  3. Retrieve the ads-certificate entry: $ ldapsearch \
--port 1389 \
--hostname opendj.example.com \
ds-cfg-public-key-certificate;binary:: MIIB6zCCAVSgAwIBAgIEDKSUFjANBgkqhkiG9w0BA
LmNvbTAeFw0xMzAyMDcxMDMwMzNaFw0zMzAyMDIxMDMwMzNaMDoxGzAZBgNVBAoTEk9wZW5ESiBDZXJ
CBiQKBgQCfGLAiUOz4sC8CM9T5DPTk9V9ErNC8N59XwBt1aN7UjhQl4/JZZsetubtUrZBLS9cRrnYdZ
cpFgLQNEmXifS+PdZ0DJkaLNFmd8ZX0spX8++fb4SkkggkmNRmi1fccDQ/DHMlwl7kk884lXummrzcD
GbZ7p4vnY7y7GmD1vZSP+wIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAJciUzUP8T8A9VV6dQB0SYCNG1o
7IvpE7jGVZh6KvM0m5sBNX3wPbTVJQNij3TDm8nx6yhi6DUkpiAZfz/OBL5k+WSw80TjpIZ2+klhP1s
objectClass: top
objectClass: ds-cfg-instance-key

4. Retrieve the MD5 fingerprint of the ads-certificate.

In this example, the MD5 fingerprint is 07:35:80:D8:F3:CE:E1:39:9C:D0:73:DB:6C:FA:CC:1C:

$keytool \ -list \ -v \ -alias ads-certificate \ -keystore /path/to/opendj/config/ads-truststore \ -storepass cat /path/to/opendj/config/ads-truststore.pin Alias name: ads-certificate Creation date: Feb 7, 2013 Entry type: PrivateKeyEntry Certificate chain length: 1 Certificate[1]: Owner: CN=opendj.example.com, O=OpenDJ Certificate Issuer: CN=opendj.example.com, O=OpenDJ Certificate Serial number: ca49416 Valid from: Thu Feb 07 11:30:33 CET 2013 until: Wed Feb 02 11:30:33 CET 2033 Certificate fingerprints: MD5: 07:35:80:D8:F3:CE:E1:39:9C:D0:73:DB:6C:FA:CC:1C SHA1: 56:30:F6:79:AA:C0:BD:61:88:3E:FB:38:38:9D:84:70:0B:E4:43:57 SHA256: A8:4B:81:EE:30:2A:0C:09:2E:...:C1:41:F5:AB:19:C6:EE:AB:50:64 Signature algorithm name: SHA1withRSA Version: 3  5. Using the MD5 fingerprint and the certificate entry, prepare LDIF to update cn=admin data with the new server certificate: $ cat /path/to/update-server-cert.ldif
dn: ds-cfg-key-id=073580D8F3CEE1399CD073DB6CFACC1C,cn=instance keys,
ds-cfg-key-id: 073580D8F3CEE1399CD073DB6CFACC1C
ds-cfg-public-key-certificate;binary:: MIIB6zCCAVSgAwIBAgIEDKSUFjANBgkqhkiG9w0BA
LmNvbTAeFw0xMzAyMDcxMDMwMzNaFw0zMzAyMDIxMDMwMzNaMDoxGzAZBgNVBAoTEk9wZW5ESiBDZXJ
CBiQKBgQCfGLAiUOz4sC8CM9T5DPTk9V9ErNC8N59XwBt1aN7UjhQl4/JZZsetubtUrZBLS9cRrnYdZ
cpFgLQNEmXifS+PdZ0DJkaLNFmd8ZX0spX8++fb4SkkggkmNRmi1fccDQ/DHMlwl7kk884lXummrzcD
GbZ7p4vnY7y7GmD1vZSP+wIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAJciUzUP8T8A9VV6dQB0SYCNG1o
7IvpE7jGVZh6KvM0m5sBNX3wPbTVJQNij3TDm8nx6yhi6DUkpiAZfz/OBL5k+WSw80TjpIZ2+klhP1s
objectClass: top
objectClass: ds-cfg-instance-key

changetype: modify
replace: ds-cfg-key-id
ds-cfg-key-id: 073580D8F3CEE1399CD073DB6CFACC1C


6. Update the administrative data, causing OpenDJ to create a copy of the new ads-certificate with its MD5 signature as the alias in the ads-truststore:

$ldapmodify \ --port 1389 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --filename /path/to/update-server-cert.ldif Processing ADD request for ds-cfg-key-id=073580D8F3CEE1399CD073DB6CFACC1C, cn=instance keys,cn=admin data ADD operation successful for DN ds-cfg-key-id=073580D8F3CEE1399CD073DB6CFACC1C, cn=instance keys,cn=admin data Processing MODIFY request for cn=opendj.example.com:4444,cn=Servers, cn=admin data MODIFY operation successful for DN cn=opendj.example.com:4444,cn=Servers, cn=admin data  2. Force OpenDJ to reopen replication connections using the new key pair. Stop replication temporarily and then start it again as described in Section 8.3, "Configuring Replication": $ dsconfig \
set-synchronization-provider-prop \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
--provider-name "Multimaster Synchronization" \
--set enabled:false \
--no-prompt

$dsconfig \ set-synchronization-provider-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --provider-name "Multimaster Synchronization" \ --set enabled:true \ --no-prompt  Chapter 21. Moving Servers This chapter explains how to move OpenDJ directory servers, which you must do if you change the hostname, the filesystem layout, or the system where OpenDJ directory server is installed. In this chapter you will learn to: • Prepare for the move, especially when the server is replicated, and when the directory service remains available during the move • Perform the configuration needed to move the directory server When you change where OpenDJ is deployed, you must take host names, port numbers, and certificates into account. The changes can also affect your replication configuration. 21.1. Overview From time to time you might change server hardware, file system layout, or host names. At those times you move the services running on the system. You can move OpenDJ data between servers and operating systems. Most of the configuration is also portable. Two aspects of the configuration are not portable: 1. Server certificates contain the host name of the system. Even if you did not set up secure communications when you installed the server, the server still has a certificate used for secure communications on the administrative port. To resolve the issue with server certificates, you can change the server certificates during the move as described in this chapter. 2. Replication configuration includes the host name and administrative port numbers. You can work around the issue with replication configuration by disabling replication for the server before the move, and then enabling and initializing replication again after the move. 21.2. Before You Move Take a moment to determine whether you find it quicker and easier to move your server, or to recreate a copy. To recreate a copy, install a new server, set up the new server configuration to match the old, and then copy only the data from the old server to the new server, initializing replication from existing data, or even from LDIF if your database is not too large. After you decide to move a server, start by taking it out of service. Taking it out of service means directing client applications elsewhere, and then preventing updates from client applications, and finally disabling replication. Directing client applications elsewhere depends on your network configuration and possibly on your client application configuration. The other two steps can be completed with the dsconfig and dsreplication commands. Procedure 21.1. To Take the Server Out of Service 1. Direct client applications to other servers. How you do this depends on your network and client application configurations. 2. Prevent the server from accepting updates from client applications: $ dsconfig \
set-global-configuration-prop \
--port 4444 \
--hostname opendj2.example.com \
--bindDN "cn=Directory Manager" \
--set writability-mode:internal-only \
--trustAll \
--no-prompt

3. Disable replication for the server:

$dsreplication \ disable \ --disableAll \ --port 4444 \ --hostname opendj2.example.com \ --adminUID admin \ --adminPassword password \ --trustAll \ --no-prompt Establishing connections ..... Done. Disabling replication on base DN dc=example,dc=com of server opendj2.example.com:4444 ..... Done. Disabling replication on base DN cn=admin data of server opendj2.example.com:4444 ..... Done. Disabling replication on base DN cn=schema of server opendj2.example.com:4444 ..... Done. Disabling replication port 8989 of server opendj2.example.com:4444 ..... Done. Removing registration information ..... Done. Removing truststore information ..... Done. See /var/.../opends-replication-3173475478874782719.log for a detailed log of this operation.  4. With the server no longer receiving traffic or accepting updates from clients, and no longer replicating to other servers, you can shut it down in preparation for the move: $ stop-ds
Stopping Server...

... msg=The Directory Server is now stopped

5. You might also choose to remove extra log files from the server logs/ directory before moving the server.

21.3. Moving a Server

Now that you have decided to move your server, and prepared for the move, you must not only move the files but also fix the configuration and the server certificates, and then enable replication.

Procedure 21.2. To Move the Server
1. Move the contents of the server installation directory to the new location.

2. If you must change port numbers, edit the port numbers in config/config.ldif, carefully avoiding changing any whitespace or other lines in the file.

3. Change server certificates as described in Chapter 20, "Changing Server Certificates".

4. Start the server:

$start-ds ... The Directory Server has started successfully  5. Enable and initialize replication: $ dsreplication \
enable \
--baseDN dc=example,dc=com \
--host1 opendj.example.com \
--port1 4444 \
--bindDN1 "cn=Directory Manager" \
--replicationPort1 8989 \
--host2 opendj2.example.com \
--port2 4444 \
--bindDN2 "cn=Directory Manager" \
--replicationPort2 8989 \
--trustAll \
--no-prompt

Establishing connections ..... Done.
Checking registration information ..... Done.
Configuring Replication port on server opendj.example.com:4444 ..... Done.
Updating remote references on server opendj2.example.com:4444 ..... Done.
Updating replication configuration for baseDN dc=example,dc=com on server
opendj.example.com:4444 ..... Done.
Updating replication configuration for baseDN dc=example,dc=com on server
opendj2.example.com:4444 ..... Done.
Updating registration configuration on server
opendj.example.com:4444 ..... Done.
Updating registration configuration on server
opendj2.example.com:4444 ..... Done.
Updating replication configuration for baseDN cn=schema on server
opendj.example.com:4444 ..... Done.
Updating replication configuration for baseDN cn=schema on server
opendj2.example.com:4444 ..... Done.
Initializing registration information on server opendj.example.com:4444 with
the contents of server opendj2.example.com:4444 ..... Done.
Initializing schema on server opendj2.example.com:4444 with the contents of
server opendj.example.com:4444 ..... Done.

Replication has been successfully enabled.  Note that for replication to work
you must initialize the contents of the base DN's that are being replicated
(use dsreplication initialize to do so).

See /tmp/opends-replication-1476402020764482023.log for a detailed log of this
operation.

$dsreplication \ pre-external-initialization \ --adminUID admin \ --bindPassword password \ --port 4444 \ --baseDN dc=example,dc=com \ --trustAll \ --no-prompt Preparing base DN dc=example,dc=com to be initialized externally ..... Done. Now you can proceed to the initialization of the contents of the base DN's on all the replicated servers. You can use the command import-ldif or the binary copy to do so. You must use the same LDIF file or binary copy on each server. When the initialization is completed you must use the subcommand 'post-external-initialization' for replication to work with the new base DN's contents.$ dsreplication \
post-external-initialization \
--port 4444 \
--baseDN dc=example,dc=com \
--trustAll \
--no-prompt

Updating replication information on base DN dc=example,dc=com ..... Done.

Post initialization procedure completed successfully.

6. Accept updates from client applications:

$dsconfig \ set-global-configuration-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set writability-mode:enabled \ --trustAll \ --no-prompt  7. Direct client applications to the server. Chapter 22. Troubleshooting Server Problems This chapter describes how to troubleshoot common server problems, and how to collect information necessary when seeking support help. In this chapter you will learn to: • Identify directory server problems systematically as a first troubleshooting step • Troubleshoot problems with installation and upgrade procedures, directory data import, data replication, and secure connections • Reset lost administrator passwords • Enable debug logging judiciously when solving problems • Prevent applications from accessing the directory server when solving problems • Troubleshoot problems with the way client applications access the directory • Prepare evidence when asking a directory expert for help 22.1. Identifying the Problem In order to solve your problem methodically, save time by defining the problem clearly up front. In a replicated environment with multiple directory servers and many client applications, it can be particularly important to pin down not only the problem (difference in observed behavior compared to expected behavior), but also the circumstances and steps that lead to the problem occurring. Answer the following questions: • How do you reproduce the problem? • What exactly is the problem? In other words, what is the behavior you expected? What is the behavior you observed? • When did the problem start occurring? Under similar circumstances, when does the problem not occur? • Is the problem permanent? Intermittent? Is it getting worse? Getting better? Staying the same? Pinpointing the problem can sometimes indicate where you should start looking for solutions. 22.2. Troubleshooting Installation and Upgrade Installation and upgrade procedures result in a log file tracing the operation. The log location differs by operating system, but look for lines in the command output of the following form: See /var/....log for a detailed log of this operation. Prevent antivirus and intrusion detection systems from interfering with OpenDJ directory server. Antivirus and intrusion detection systems that do a deep inspection of database files are not compatible with OpenDJ directory server. Disable antivirus and intrusion detection systems, or at least prevent them from operating on OpenDJ directory server files. 22.3. Resetting Administrator Passwords This section describes what to do if you forgot the password for Directory Manager or for the global (replication) administrator. Procedure 22.1. Resetting the Directory Manager's Password OpenDJ directory server stores the entry for Directory Manager in the LDIF representation of its configuration. You must be able to edit directory server files in order to reset Directory Manager's password. 1. Generate the encoded version of the new password using the OpenDJ encode-password command: $ encode-password --storageScheme SSHA512 --clearPassword password
NQNRtnR/Xx2xces1wu1dVLI9jVVtl1W4BVsmOKjyjr0rWrHt"

2. Stop OpenDJ directory server while you edit the configuration:

$stop-ds  3. Find Directory Manager's entry, which has DN cn=Directory Manager,cn=Root DNs,cn=config, in /path/to/opendj/config/config.ldif, and carefully replace the userpassword attribute value with the encoded version of the new password, taking care not to leave any whitespace at the end of the line: dn: cn=Directory Manager,cn=Root DNs,cn=config objectClass: person objectClass: inetOrgPerson objectClass: organizationalPerson objectClass: ds-cfg-root-dn-user objectClass: top userpassword: {SSHA512}yWqHnYV4a5llPvE7WHLe5jzK27oZQWLIlVcs9gySu4TyZJMg NQNRtnR/Xx2xces1wu1dVLI9jVVtl1W4BVsmOKjyjr0rWrHt givenName: Directory cn: Directory Manager ds-cfg-alternate-bind-dn: cn=Directory Manager sn: Manager ds-pwp-password-policy-dn: cn=Root Password Policy,cn=Password Policies ,cn=config ds-rlim-time-limit: 0 ds-rlim-lookthrough-limit: 0 ds-rlim-idle-time-limit: 0 ds-rlim-size-limit: 0  4. Start OpenDJ directory server again: $ start-ds

5. Verify that you can administer the server as Directory Manager using the new password:

$dsconfig -p 4444 -h opendj.example.com -D "cn=Directory Manager" -w password >>>> OpenDJ configuration console main menu What do you want to configure? ... Enter choice: q  Procedure 22.2. To Reset the Global Administrator's Password When you enable replication, part of the process involves creating a global administrator and setting that user's password. This user is present on all replicas. If you chose default values, this user has DN cn=admin,cn=Administrators,cn=admin data. You reset the password as you would for any other user, though you do so as Directory Manager. 1. Use the ldappasswordmodify command to reset the global administrator's password: $ ldappasswordmodify \
--useStartTLS \
--port 1389 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
The LDAP password modify operation was successful

2. Let replication copy the password change to other replicas.

22.4. Enabling Debug Logging

OpenDJ can write debug information and stack traces to the server debug log. What is logged depends both on debug targets that you create, and on the debug level that you choose.

Procedure 22.3. To Configure Debug Logging
1. Enable the debug log, opendj/logs/debug, which is not enabled by default:

$dsconfig \ set-log-publisher-prop \ --hostname opendj.example.com \ --port 4444 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --publisher-name "File-Based Debug Logger" \ --set enabled:true \ --no-prompt \ --trustAll  2. Create a debug target or targets. No debug targets are enabled by default: $ dsconfig \
list-debug-targets \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--publisher-name "File-Based Debug Logger" \
--no-prompt \
--trustAll

Debug Target : enabled : debug-exceptions-only
-------------:---------:----------------------

$ A debug target specifies a fully qualified OpenDJ Java package, class, or method for which to log debug messages at the level you specify: $ dsconfig \
create-debug-target \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--publisher-name "File-Based Debug Logger" \
--type generic \
--target-name org.opends.server.api \
--set enabled:true \
--no-prompt \
--trustAll

3. Restart OpenDJ to see debug messages in the log:

$stop-ds --restart ...$ dsconfig \
list-debug-targets \
--hostname opendj.example.com \
--port 4444 \
--bindDN "cn=Directory Manager" \
--publisher-name "File-Based Debug Logger" \
--no-prompt \
--trustAll

Debug Target          : enabled : debug-exceptions-only
----------------------:---------:----------------------
org.opends.server.api : true    : false

$tail -f /path/to/opendj/logs/debug ...  Caution OpenDJ directory server can generate a high volume of debug output. Use debug logging very sparingly on production systems. 22.5. Preventing Access While Fixing Issues Misconfiguration can potentially put OpenDJ directory server in a state where you must intervene, and where you need to prevent users and applications from accessing the directory until you are done fixing the problem. OpenDJ directory server provides a lockdown mode that allows connections only on the loopback address, and allows only operations requested by root DN users, such as cn=Directory Manager. You can use lockdown mode to prevent all but administrative access while you repair the server. To put OpenDJ directory server into lockdown mode, the server must be running. You cause the server to enter lockdown mode by using a task. Notice that the modify operation is performed over the loopback address (accessing OpenDJ directory server on the local host): $ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
objectClass: top
ds-task-id: Enter Lockdown Mode

Processing ADD request for
ADD operation successful for DN


OpenDJ directory server logs a notice message in logs/errors when lockdown mode takes effect:

...msg=Lockdown task Enter Lockdown Mode finished execution

Client applications that request operations get a message concerning lockdown mode:

$ldapsearch --port 1389 --baseDN "" --searchScope base "(objectclass=*)" + SEARCH operation failed Result Code: 53 (Unwilling to Perform) Additional Information: Rejecting the requested operation because the server is in lockdown mode and will only accept requests from root users over loopback connections  You also leave lockdown mode by using a task: $ ldapmodify \
--port 1389 \
--bindDN "cn=Directory Manager" \
objectClass: top
ds-task-id: Leave Lockdown Mode

Processing ADD request for
ADD operation successful for DN


OpenDJ directory server logs a notice message when leaving lockdown mode:

...msg=Leave Lockdown task Leave Lockdown Mode finished execution

22.6. Troubleshooting LDIF Import

By default OpenDJ requires that LDIF data you import respect standards. In particular, OpenDJ is set to check that entries to import match the schema defined for the server. You can temporarily bypass this check by using the --skipSchemaValidation with the import-ldif command.

OpenDJ also ensures by default that entries have only one structural object class. You can relax this behavior by using the advanced global configuration property, single-structural-objectclass-behavior. This can be useful when importing data exported from Sun Directory Server. For example, to warn when entries have more than one structural object class instead of reject such entries being added, set single-structural-objectclass-behavior:warn as follows:

$dsconfig \ set-global-configuration-prop \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --set single-structural-objectclass-behavior:warn \ --trustAll \ --no-prompt  By default, OpenDJ also checks syntax for a number of attribute types. Relax this behavior by using the dsconfig set-attribute-syntax-prop command. Use the --help option for further information. When running import-ldif, you can use the -R rejectFile option to capture entries that could not be imported, and the --countRejects option to return the number of rejected entries as the import-ldif exit code. Once you work through the issues with your LDIF data, reinstate the default behavior to ensure automated checking. 22.7. Troubleshooting TLS/SSL Connections This section offers tips on troubleshooting LDAPS connections and connections set up with the StartTLS operation. In order to trust the server certificate, client applications usually compare the signature on certificates with those of the Certificate Authorities (CAs) whose certificates are distributed with the client software. For example, the Java environment is distributed with a keystore holding many CA certificates: $ keytool \
-list \
-keystore $JAVA_HOME/jre/lib/security/cacerts \ -storepass changeit \ | wc -l 208 The self-signed server certificates that can be configured during OpenDJ setup are not recognized as being signed by any CAs. Your software therefore is configured not to trust the self-signed certificates by default. You must either configure the client applications to accept the self-signed certificates, or else use certificates signed by recognized CAs. You can further debug the network traffic by collecting debug traces. To see the traffic going over TLS/SSL in debug mode, configure OpenDJ to dump debug traces from javax.net.debug into the logs/server.out file: $ OPENDJ_JAVA_ARGS="-Djavax.net.debug=all" start-ds


22.7.1. Troubleshooting Certificates and SSL Authentication

Replication uses SSL to protect directory data on the network. In some configurations, replica can fail to connect to each other due to SSL handshake errors. This leads to error log messages such as the following:

[21/Nov/2011:13:03:20 -0600] category=SYNC severity=NOTICE
msgID=15138921 msg=SSL connection attempt from myserver (123.456.789.012)
failed: Remote host closed connection during handshake


Notice these problem characteristics in the message above:

• The host name, myserver, is not fully qualified.

You should not see non-fully qualified host names in the error logs. Non-fully qualified host names are a sign that an OpenDJ server has not been configured properly.

Always install and configure OpenDJ using fully qualified host names. The OpenDJ administration connector, which is used by the dsconfig command, and also replication depend upon SSL and, more specifically, self-signed certificates for establishing SSL connections. If the host name used for connection establishment does not correspond to the host name stored in the SSL certificate then the SSL handshake can fail. For the purposes of establishing the SSL connection, a host name like myserver does not match myserver.example.com, and vice versa.

• The connection succeeded, but the SSL handshake failed, suggesting a problem with authentication or with the cipher or protocol negotiation. As most deployments use the same Java Virtual Machine (JVM), and the same JVM configuration for each replica, the problem is likely not related to SSL cipher or protocol negotiation, but instead lies with authentication.

Follow these steps on each OpenDJ server to check whether the problem lies with the host name configuration:

1. Make sure each OpenDJ server uses only fully qualified host names in the replication configuration. You can obtain a quick summary by running the following command against each server's configuration:

$grep ds-cfg-replication-server: config/config.ldif | sort | uniq  2. Make sure that the host names in OpenDJ certificates also contain fully qualified host names, and correspond to the host names found in the previous step: # Examine the certificates used for the administration connector.$ keytool -list -v -keystore config/admin-truststore \
-storepass cat config/admin-keystore.pin |grep "^Owner:"

# Examine the certificates used for replication.
$keytool -list -v -keystore config/ads-truststore \ -storepass cat config/ads-truststore.pin| grep "^Owner:"  Sample output for a server on host opendj.example.com follows: $ grep ds-cfg-replication-server: config/config.ldif |sort | uniq
ds-cfg-replication-server: opendj.example.com:8989
ds-cfg-replication-server: opendj.example.com:9989

$keytool -list -v -keystore config/admin-truststore -storepass cat config/admin-keystore.pin | grep "^Owner:" Owner: CN=opendj.example.com, O=Administration Connector Self-Signed Certificate$ keytool -list -v -keystore config/ads-truststore \
-storepass cat config/ads-truststore.pin| grep "^Owner:"
Owner: CN=opendj.example.com, O=OpenDJ Certificate
Owner: CN=opendj.example.com, O=OpenDJ Certificate
Owner: CN=opendj.example.com, O=OpenDJ Certificate


Unfortunately there is no easy solution to badly configured host names. It is often easier and quicker simply to reinstall your OpenDJ servers remembering to use fully qualified host names everywhere. Consider the following:

• When using the setup tool to install and configure a server ensure that the -h option is included, and that it specifies the fully qualified host name. Make sure you include this option even if you are not enabling SSL/StartTLS LDAP connections.

If you are using the GUI installer, then make sure you specify the fully qualified host name on the first page of the wizard.

• When using the dsreplication tool to enable replication make sure that any --host options include the fully qualified host name.

If you cannot reinstall the server, follow these steps:

1. Disable replication in each replica:

$dsreplication \ disable \ --disableAll \ --port adminPort \ --hostname hostName \ --bindDN "cn=Directory Manager" \ --adminPassword password \ --trustAll \ --no-prompt  2. Stop and restart each server in order to clear the in-memory ADS truststore backend. 3. Enable replication making certain that fully qualified host names are used throughout: $ dsreplication \
enable \
--baseDN dc=example,dc=com \
--host1 hostName1 \
--bindDN1 "cn=Directory Manager" \
--replicationPort1 replPort1 \
--host2 hostName2 \
--bindDN2 "cn=Directory Manager" \
--replicationPort2 replPort2 \
--trustAll \
--no-prompt

4. Repeat the previous step for each remaining replica. In other words, host1 with host2, host1 with host3, host1 with host4, ..., host1 with hostN.

5. Initialize all remaining replica with the data from host1:

$dsreplication \ initialize-all \ --adminUID admin \ --adminPassword password \ --baseDN dc=example,dc=com \ --hostname hostName1 \ --port 4444 \ --trustAll \ --no-prompt  6. Check that the host names are correct in the configuration and in the keystores by following the steps you used to check for host name problems. The only broken host name remaining should be in the key and truststores for the administration connector: $ keytool -list -v -keystore config/admin-truststore \
-storepass cat config/admin-keystore.pin |grep "^Owner:"

7. Stop each server, and then fix the remaining admin connector certificate as described in Procedure 20.1, "To Replace a Server Key Pair".

22.7.2. Handling Compromised Keys

As explained in Chapter 20, "Changing Server Certificates", OpenDJ directory server has different keys and keystores for different purposes. The public keys used for replication are also used to encrypt shared secret symmetric keys, for example, to encrypt and to sign backups. This section looks at what to do if either a key pair or secret key is compromised.

How you handle the problem depends on which key was compromised:

• For a key pair used for a client connection handler and with a certificate signed by a certificate authority (CA), contact the CA for help. The CA might choose to publish a certificate revocation list (CRL) that identifies the certificate of the compromised key pair.

Also make sure you replace the key pair. See Procedure 20.1, "To Replace a Server Key Pair" for specific steps.

• For a key pair used for a client connection handler and that has a self-signed certificate, follow the steps in Procedure 20.1, "To Replace a Server Key Pair", and make sure the clients remove the compromised certificate from their truststores, updating those truststores with the new certificate.

• For a key pair that is used for replication, mark the key as compromised as described below, and replace the key pair. See Procedure 20.2, "To Replace the Key Pair Used for Replication" for specific steps.

To mark the key pair as compromised, follow these steps:

1. Identify the key entry by searching administrative data on the server whose key was compromised.

The server in this example is installed on opendj.example.com with administration port 4444:

$ldapsearch \ --port 1389 \ --hostname opendj.example.com \ --baseDN "cn=admin data" \ "(cn=opendj.example.com:4444)" ds-cfg-key-id dn: cn=opendj.example.com:4444,cn=Servers,cn=admin data ds-cfg-key-id: 4F2F97979A7C05162CF64C9F73AF66ED  The key ID, 4F2F97979A7C05162CF64C9F73AF66ED, is the RDN of the key entry. 2. Mark the key as compromised by adding the attribute, ds-cfg-key-compromised-time, to the key entry. The attribute has generalized time syntax, and so takes as its value the time at which the key was compromised expressed in generalized time. In the following example, the key pair was compromised at 8:34 AM UTC on March 21, 2013: $ ldapmodify \
--port 1389 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
dn: ds-cfg-key-id=4F2F97979A7C05162CF64C9F73AF66ED,cn=instance keys,cn=admin data
changetype: modify
ds-cfg-key-compromised-time: 201303210834Z

Processing MODIFY request for ds-cfg-key-id=4F2F97979A7C05162CF64C9F73AF66ED,
MODIFY operation successful for DN ds-cfg-key-id=4F2F97979A7C05162CF64C9F73AF66ED

3. If the server uses encrypted or signed data, then the shared secret keys used for encryption or signing and associated with the compromised key pair should also be considered compromised. Therefore, mark all shared secret keys encrypted with the instance key as compromised.

To identify the shared secret keys, find the list of secret keys in the administrative data whose ds-cfg-symmetric-key starts with the key ID of the compromised key:

$ldapsearch \ --port 1389 \ --bindDN "cn=Directory Manager" \ --bindPassword password \ --baseDN "cn=secret keys,cn=admin data" \ "(ds-cfg-symmetric-key=4F2F97979A7C05162CF64C9F73AF66ED*)" dn dn: ds-cfg-key-id=fba16e59-2ce1-4619-96e7-8caf33f916c8,cn=secret keys,cn=admin d ata dn: ds-cfg-key-id=57bd8b8b-9cc6-4a29-b42f-fb7a9e48d713,cn=secret keys,cn=admin d ata dn: ds-cfg-key-id=f05e2e6a-5c4b-44d0-b2e8-67a36d304f3a,cn=secret keys,cn=admin d ata  For each such key, mark the entry with ds-cfg-key-compromised-time as shown above for the instance key. Changes to administration data are replicated to other OpenDJ servers in the replication topology. • For a shared secret key used for data encryption that has been compromised, mark the key entry with ds-cfg-key-compromised-time as shown in the example above that demonstrates marking the instance key as compromised. Again, changes to administration data are replicated to other OpenDJ servers in the replication topology. 22.8. Troubleshooting Client Operations By default OpenDJ logs information about all LDAP client operations in logs/access, and all HTTP client operations in logs/http-access. The following lines are wrapped for readability, showing a search for the entry with uid=bjensen as traced in the LDAP access log. In the access log itself, each line starts with a time stamp: [27/Jun/2011:17:23:00 +0200] CONNECT conn=19 from=127.0.0.1:56641 to=127.0.0.1:1389 protocol=LDAP [27/Jun/2011:17:23:00 +0200] SEARCH REQ conn=19 op=0 msgID=1 base="dc=example,dc=com" scope=wholeSubtree filter="(uid=bjensen)" attrs="ALL" [27/Jun/2011:17:23:00 +0200] SEARCH RES conn=19 op=0 msgID=1 result=0 nentries=1 etime=3 [27/Jun/2011:17:23:00 +0200] UNBIND REQ conn=19 op=1 msgID=2 [27/Jun/2011:17:23:00 +0200] DISCONNECT conn=19 reason="Client Unbind"  As you see, each client connection and set of LDAP operations are traced, starting with a time stamp and information about the operation performed, then including information about the connection, the operation number for the sequence of operations performed by the client, a message identification number, and additional information about the operation. To match HTTP client operations with related internal server operations, first prevent OpenDJ from suppressing internal operations from the LDAP access log by using the dsconfig command to set the LDAP access log publisher suppress-internal-operations advanced property to false. Then match the values of the x-connection-id field in the HTTP access log with conn=id values in the LDAP access log. For example, consider an HTTP GET request for the _id field of the user newuser, which is handled by connection 4 as shown in logs/http-access: - 192.168.0.12 bjensen 22/May/2013:16:27:52 +0200 GET /users/newuser?_fields=_id HTTP/1.1 200 curl/7.21.4 4 12  With internal operations logged in logs/access, log lines for the related operations have conn=4: [22/May/2013:16:27:52 +0200] CONNECT conn=4 from=192.168.0.12:63593 to=192.168.0.12:8080 protocol=HTTP/1.1 [22/May/2013:16:27:52 +0200] SEARCH REQ conn=4 op=0 msgID=0 base="ou=people,dc=example,dc=com" scope=wholeSubtree filter="(&(objectClass=inetOrgPerson)(uid=bjensen))" attrs="1.1" [22/May/2013:16:27:52 +0200] SEARCH RES conn=4 op=0 msgID=0 result=0 nentries=1 etime=5 [22/May/2013:16:27:52 +0200] BIND REQ conn=4 op=1 msgID=1 version=3 type=SIMPLE dn="uid=bjensen,ou=People,dc=example,dc=com" [22/May/2013:16:27:52 +0200] BIND RES conn=4 op=1 msgID=1 result=0 authDN="uid=bjensen,ou=People,dc=example,dc=com" etime=3 [22/May/2013:16:27:52 +0200] SEARCH REQ conn=4 op=2 msgID=2 base="uid=newuser,ou=people,dc=example,dc=com" scope=baseObject filter="(objectClass=*)" attrs="uid,etag" [22/May/2013:16:27:52 +0200] SEARCH RES conn=4 op=2 msgID=2 result=0 nentries=1 etime=4 [22/May/2013:16:27:52 +0200] UNBIND REQ conn=4 op=3 msgID=3 [22/May/2013:16:27:52 +0200] DISCONNECT conn=4 reason="Client Unbind"  To help diagnose errors due to access permissions, OpenDJ supports the get effective rights control. The control OID, 1.3.6.1.4.1.42.2.27.9.5.2, is not allowed by the default global ACIs. You must therefore add access to use the get effective rights control when not using it as Directory Manager. 22.8.1. Clients Need Simple Paged Results Control For Solaris and some versions of Linux you might see a message in the OpenDJ access logs such as the following: The request control with Object Identifier (OID) "1.2.840.113556.1.4.319" cannot be used due to insufficient access rights This message means clients are trying to use the simple paged results control without authenticating. By default, OpenDJ includes a global ACI to allow only authenticated users to use the control: $ dsconfig \
--port 4444 \
--hostname opendj.example.com \
--bindDN "cn=Directory Manager" \
get-access-control-handler-prop

Property   : Value(s)
-----------:-------------------------------------------------------------------
enabled    : true
global-aci : (extop="1.3.6.1.4.1.26027.1.6.1 || 1.3.6.1.4.1.26027.1.6.3 ||
...
: (targetcontrol="1.3.6.1.1.12 || 1.3.6.1.1.13.1 || 1.3.6.1.1.13.2
: || 1.2.840.113556.1.4.319 || 1.2.826.0.1.3344810.2.3 ||
: 2.16.840.1.113730.3.4.18 || 2.16.840.1.113730.3.4.9 ||
: 1.2.840.113556.1.4.473 || 1.3.6.1.4.1.42.2.27.9.5.9") (version
: 3.0; acl "Authenticated users control access"; allow(read)
: userdn="ldap:///all";), (targetcontrol="2.16.840.1.113730.3.4.2 ||
: 2.16.840.1.113730.3.4.17 || 2.16.840.1.113730.3.4.19 ||
: 1.3.6.1.4.1.4203.1.10.2 || 1.3.6.1.4.1.42.2.27.8.5.1 ||
: 2.16.840.1.113730.3.4.16") (version 3.0; acl "Anonymous control
: access"; allow(read) userdn="ldap:///anyone";)


To grant anonymous (unauthenticated) user access to the control, add the OID for the simple paged results control to the list of those in the Anonymous control access global ACI:

$dsconfig \ --port 4444 \ --hostname opendj.example.com \ --bindDN "cn=Directory Manager" \ --bindPassword "password" \ set-access-control-handler-prop \ --remove global-aci:"(targetcontrol=\"2.16.840.1.113730.3.4.2 || \ 2.16.840.1.113730.3.4.17 || 2.16.840.1.113730.3.4.19 || \ 1.3.6.1.4.1.4203.1.10.2 || 1.3.6.1.4.1.42.2.27.8.5.1 || \ 2.16.840.1.113730.3.4.16\") (version 3.0; acl \"Anonymous control access\"; \ allow(read) userdn=\"ldap:///anyone\";)" \ --add global-aci:"(targetcontrol=\"2.16.840.1.113730.3.4.2 || \ 2.16.840.1.113730.3.4.17 || 2.16.840.1.113730.3.4.19 || \ 1.3.6.1.4.1.4203.1.10.2 || 1.3.6.1.4.1.42.2.27.8.5.1 || \ 2.16.840.1.113730.3.4.16 || 1.2.840.113556.1.4.319\") \ (version 3.0; acl \"Anonymous control access\"; allow(read) \ userdn=\"ldap:///anyone\";)" \ --no-prompt  Alternatively, stop OpenDJ, edit the corresponding ACI carefully in /path/to/opendj/config/config.ldif, and restart OpenDJ. [17] 22.9. Troubleshooting Replication Replication can generally recover from conflicts and transient issues. Replication does, however, require that update operations be copied from server to server. It is therefore possible to experience temporary delays while replicas converge, especially when the write operation load is heavy. OpenDJ's tolerance for temporary divergence between replicas is what allows OpenDJ to remain available to serve client applications even when networks linking the replicas go down. In other words, the fact that directory services are loosely convergent rather than transactional is a feature, not a bug. That said, you may encounter errors. Replication uses its own error log file, logs/replication. Error messages in the log file have category=SYNC. The messages have the following form. Here the line is folded for readability: [27/Jun/2011:14:37:48 +0200] category=SYNC severity=INFORMATION msgID=14680169 msg=Replication server accepted a connection from 10.10.0.10/10.10.0.10:52859 to local address 0.0.0.0/0.0.0.0:8989 but the SSL handshake failed. This is probably benign, but may indicate a transient network outage or a misconfigured client application connecting to this replication server. The error was: Remote host closed connection during handshake  OpenDJ maintains historical information about changes in order to bring replicas up to date, and to resolve replication conflicts. To prevent historical information from growing without limit, OpenDJ purges historical information after a configurable delay (replication-purge-delay, default: 3 days). A replica can become irrevocably out of sync if you restore it from a backup archive older than the purge delay, or if you stop it for longer than the purge delay. If this happens to you, disable the replica, and then reinitialize it from a recent backup or from a server that is up to date. 22.10. Asking For Help When you cannot resolve a problem yourself, and want to ask for help, clearly identify the problem and how you reproduce it, and also the version of OpenDJ you use to reproduce the problem. The version includes both a version number and also a build time stamp: $ dsconfig --version
OpenDJ 4.0.0-SNAPSHOT
Build yyyymmddhhmmssZ


Be ready to provide the following additional information:

• The output from the java -version command.

• access and errors logs showing what the server was doing when the problem started occurring

• A copy of the server configuration file, config/config.ldif, in use when the problem started occurring

• Other relevant logs or output, such as those from client applications experiencing the problem

• A description of the environment where OpenDJ is running, including system characteristics, host names, IP addresses, Java versions, storage characteristics, and network characteristics. This helps to understand the logs, and other information.

[17] Unlike the dsconfig command, the config.ldif file is not a public interface, so this alternative should not be used in production.

Index

A

Access control, About Access Control, Restricting Client Access, About ACIs
Debugging, Viewing Effective Rights
Disabling anonymous access, Configuring Access Control
Effective rights, Viewing Effective Rights
Evaluation, How ACI is Evaluated
Examples, Configuring Access Control
Operations, ACI Required For LDAP Operations
Permissions, ACI Permissions
Subjects, ACI Subjects
Targets, ACI Targets
Accounts
Activating, Managing Accounts Manually
Customizing notification messages, Managing Account Status Notification
Disabling, Managing Accounts Manually
Lockout, Configuring Account Lockout
Active Directory (see Pass-through authentication)

F

File descriptors
Requirements, Maximum Open Files

H

High availability (see Replication)
HTTP, RESTful Client Access Over HTTP

M

Matching rules, Configuring a Standard Index
Monitoring, Monitoring, Logging, and Alerts
Moving servers, Moving Servers

T

TLS, TLS Protocols and Cipher Suites
Troubleshooting, Troubleshooting Server Problems
Recovery from user error, Recovering From User Error

U

Unique attribute values, Implementing Attribute Value Uniqueness